Shaking table tests on reinforced concrete frames without and with passive control systems

An extensive experimental program of shaking table tests on reduced‐scale structural models was carried out within the activities of the MANSIDE project, for the development of new seismic isolation and energy dissipation devices based on shape memory alloys (SMAs). The aim of the experimental program was to compare the behaviour of structures endowed with innovative SMA‐based devices to the behaviour of conventional structures and of structures endowed with currently used passive control systems. This paper presents a comprehensive overview of the main results of the shaking table tests carried out on the models with and without special braces. Two different types of energy dissipating and re‐centring braces have been considered to enhance the seismic performances of the tested model. They are based on the hysteretic properties of steel elements and on the superelastic properties of SMAs, respectively. The addition of passive control braces in the reinforced concrete frame resulted in significant benefits on the overall seismic behaviour. The seismic intensity producing structural collapse was considerably raised, interstorey drifts and shear forces in columns were drastically reduced. Copyright © 2005 John Wiley & Sons, Ltd.     

Rainfall interception by an isolated evergreen oak tree in a Mediterranean savannah

Redistribution of ground‐level rainfall and interception loss by an isolated Quercus ilex tree were measured over 2 years in a Mediterranean oak savannah. Stemflow, meteorological variables and sap flow were also monitored. Rainfall at ground level was measured by a set of rain‐gauges located in a radial layout centred on the tree trunk and extending beyond the crown limits. Interception loss was computed as the difference between the volume of rainwater that would reach the ground in the absence of the tree and the volume of water that actually fell on the ground sampling area (stemflow included). This procedure provided correct interception loss estimates, irrespective of rainfall inclination. Results have shown a clear non‐random spatial distribution of ground‐level rainfall, with rainwater concentrations upwind beneath the crown and rain‐shadows downwind. Interception loss amounted to 22% of gross rainfall, per unit of crown‐projected area. Stand interception loss, per unit of ground area, was only 8% of gross rainfall and 28% of tree evapotranspiration. These values reflect the low crown cover fraction of the stand (0·39) and the specific features of the Mediterranean rainfall regime (predominantly with few large storms). Nevertheless, it still is an important component of the water balance of these Mediterranean ecosystems. Copyright © 2005 John Wiley & Sons, Ltd.     

Characterization of acid mine drainage sources in the Iberian Pyrite Belt: base methodology for quantifying affected areas and for environmental management

The present work aims to propose a methodology for quantifying the sources of acid mine drainage (AMD) and to characterize the magnitude of the affected areas in the Iberian Pyrite Belt (SW Spain). Such an approach allows the creation of a support tool for managing land and natural resources valorization, which may be easily applied in similar mining regions. The motivation and usefulness of this work can be realized by focusing on two main emerging strategic issues: (1) water resources management, with the example of Alcolea dam that will receive water from affected areas in the Iberian Pyrite Belt; and (2) mineral resources valorization, especially, regarding copper exploration due to increasing market prices. The used methodology included the following general steps: it started with an inventory of the mines in the Iberian Pyrite Belt, followed by field cartography campaigns and finally the quantification of affected areas and contaminant discharges. The results of the present work serve to confirm and quantify the magnitude of the AMD pollution in the Pyrite Belt. A total affected area of about 4,847 ha was estimated. Taking into account this figure and combining it with the annual average precipitation (650 L/m²) results in an estimation of 31,503,680 m³/year of discharging water affected by the presence of sulphides. In this scenario, a total annual contribution of 260,056 tonnes/year was obtained for sulphates, which means more than 712 tonnes a day. In the case of arsenic, a toxic element, the total annual contribution is more than 20 tonnes, or close to 55 kg/day. Regarding copper, this economically interesting metal translates into total contributions of 10,364 tonnes/year in the generating medium. This gave more than 28 tonnes/day, which today sits at 8,200 dollars/tonne. This result suggests that solutions aimed at recovering this resource should be searched. It may represent a financial return at the same time that it would mean overcome environmental liabilities.     

Analysis of Fracture Mechanics Tests on Opalinus Clay

Many studies have recently been conducted to evaluate various mechanical characteristics of the Opalinus Clay (OPA) formation in view of its potential use as the hosting rock for the Swiss nuclear waste repositories. Its sedimentary bedding makes OPA a transversely isotropic rock and its directional mechanical properties need to be measured. This paper reports on an experimental and computational approach that was adopted to define the parallel-to-bedding fracture mechanics (FM) parameters of OPA in Mode-I. OPA cores from Mont Terri Underground Research Laboratory (URL) were submitted to laboratory tests on notched semi-circular specimens under three-point bending (SCB). In these tests, crack propagation is forced along the notch direction. However, the 45° bedding inclination of the specimen axis frequently deviated the crack from the expected direction. An analysis of the SCB tests was performed by means of non-linear FM techniques and the pertinent Mode-I parameters along the bedding were estimated.     

Study of the Contributions of Non‐Specific and Specific Interactions during Fluoxetine Adsorption onto Activated Carbons

The adsorption of fluoxetine onto activated carbons (ACs) prepared from almond tree pruning by steam and CO₂ activation under different temperature conditions (650–950°C), was studied. In both series increasing the temperature caused an increase in the BET apparent surface area, yielding ACs with S_BET up to 870 and 710 m² g^?1 after steam and CO₂ activation, respectively. Also, a slight widening of the porosity was found in both cases. In order to modify the functionality of the ACs, two of them were impregnated with triethylenediamine (TEDA) prior to the adsorption process, which caused a decrease in the AC apparent surface mainly due to micropore blockage. The fluoxetine adsorption isotherms at 25°C showed maximum adsorption capacities between 110 and 224 mg g^?1. The adsorption isotherms were analyzed using Langmuir and Freundlich models. Although the impregnation reduced the pore volume, it did not cause a decrease in the fluoxetine maximum adsorption capacity, but a modification in the adsorption mechanism was observed.     

Dissipative devices for earthquake resistant composite steel structures: bolted versus welded solution

This paper investigates and compares the seismic performance of two types of innovative repairable fuse devices for earthquake resistant composite steel frames through experimental tests and numerical analyses. The fuses are energy dissipating devices consisting of steel plates that can be welded or bolted to the beam web and bottom flange. The numerical analyses performed in this study are based on the results of experimental tests carried out on beam-to-column sub-assemblages equipped with both the types of fuse devices. The main differences in terms of hysteretic behavior and failure modes of the fuses are identified through the experimental campaign. Detailed three-dimensional finite element models of the beam-to-column sub-assemblages are then created to provide a deeper insight into both the response and the effectiveness of the two investigated devices. On the basis of the results of both the experimental tests and numerical analyses, simplified models of different types of fuses are developed in order to study the effects of bolted and welded devices on the seismic response of composite steel frames. The results are then extended to the case of three-dimensional building structures with different number of storeys. The experimental and numerical investigations prove the effectiveness of the fuses and highlight the main differences between the two possible solutions.     

Managing tourist harbors: Are managers aware of the real environmental risks?

The management of tourist harbors has traditionally been analyzed with little attention to managers’ awareness of the effects of their decisions on the environment. The aims of this paper were to assess managers’ perceptions of the main environmental risks in their regions and to identify common behaviors among the managers involved in eight tourist harbors in southern Italy, where the same tourist harbor is often managed by different managers. A questionnaire was administered and statistical analyses were performed to test differences between managers of big and small harbors. Managers showed a low perception of environmental risks and, surprisingly, in certain harbors, some meaningful cases were highlighted: the most homogeneous case, where all managers showed a reasonable level of environmental awareness, and cases with strong mismatches among managers. In this paper, we propose that an assessment of managers’ perceptions of risk be included as a new form of analysis when environmental risk assessments are carried out.     

Geomorphic response to late Quaternary tectonics in the axial portion of the Southern Apennines (Italy): A case study from the Calore River valley

The present study focuses on the morphotectonic evolution of the axial portion of the Southern Apennine chain between the lower Calore River valley and the northern Camposauro mountain front (Campania Region). A multidisciplinary approach was used, including geomorphological, field‐geology, stratigraphical, morphotectonic, structural, ⁴⁰Ar/³⁹Ar and tephrostratigraphical data. Results indicate that, from the Lower Pleistocene onwards, this sector of the chain was affected by extensional tectonics responsible for the onset of the sedimentation of Quaternary fluvial, alluvial fan and slope deposits. Fault systems are mainly composed of NW‐SE, NE–SW and W‐E trending strike‐slip and normal faults, associated to NW‐SE and NE–SW oriented extensions. Fault scarps, stratigraphical and structural data and morphotectonic indicators suggest that these faults affected the wide piedmont area of the northern Camposauro mountain front in the Lower Pleistocene–Upper Pleistocene time span. Faults affected both the oldest Quaternary slope deposits (Laiano Synthem, Lower Pleistocene) and the overlying alluvial fan system deposits constrained between the late Middle Pleistocene and the Holocene. The latter are geomorphologically and chrono‐stratigraphically grouped into four generations, I generation: late Middle Pleistocene–early Upper Pleistocene, with tephra layers ⁴⁰Ar/³⁹Ar dated to 158±6 and 113±7 ka; II generation: Upper Pleistocene, with tephra layers correlated with the Campanian Ignimbrite (39 ka) and with the slightly older Campi Flegrei activity (⁴⁰Ar/³⁹Ar age 48±7 ka); III generation: late Upper Pleistocene–Lower Holocene, with tephra layers correlated with the Neapolitan Yellow Tuff (~15 ka); IV generation: Holocene in age. The evolution of the first three generations was controlled by Middle Pleistocene extensional tectonics, while Holocene fans do not show evidence of tectonic activity. Nevertheless, considering the moderate to high magnitude historical seismicity of the study area, we cannot rule out that some of the recognized faults may still be active. Copyright © 2018 John Wiley & Sons, Ltd.     

Spatial evolution of an AMD stream in the Iberian Pyrite Belt: process characterization and control factors on the hydrochemistry

ABSTRACT

This paper presents hydrochemical data of an AMD stream, Poderosa Creek, in the Iberian Pyrite Belt, obtained between its source, in the Poderosa Mine portal, and its confluence with the Odiel River. The main objective is to establish potential interdependent relationships between sulphate and metal loads and the following physico-chemical variables: pH, electrical conductivity (EC), redox potential (EH) and dissolved oxygen (DO). All the parameters show an overall increasing tendency from the tunnel exit to the confluence at the Odiel River. The TDS and EC are two relevant exceptions. They behave similarly, showing a decreasing trend and a strong inflection that describes a minimum immediately after the discharging point. Spatial analysis combined with statistical tools reveal typical AMD processes and the respective physico-chemical implications. Inputs with distinctive hydrochemical signatures impose relevant modifications in the Poderosa Creek waters. This indicates low hydrochemical inertia and high vulnerability to external stimuli.

Editor D. Koutsoyiannis; Associate editor not assigned     

The colonisation of leaf litter by Chironomidae (Diptera): The influence of chemical quality and exposure duration in a subtropical stream

This study tested the hypothesis that the community composition of Chironomidae will change according to the duration of the exposure of plant leaves in a subtropical stream. In addition, we expected the chemical quality of the detritus to affect the association of Chironomidae with decaying plant materials. The chironomid colonisation of leaf litter from Campomanesia xanthocarpa and Sebastiania brasiliensis was assessed in a subtropical Atlantic forest stream. Litter bags containing leaves from these two species were incubated in the stream for 22 days. We identified 7245 invertebrates associated with the leaf detritus of both plant species (5110 were Chironomidae, 70.7% of the total). Thirteen genera of Chironomidae were identified, with Rheotanytarsus, Thienemanniella and Corynoneura the most abundant (94% of all Chironomidae collected). Chironomidae assemblages changed with the duration of incubation in the stream. The dissimilarity and the functional composition of the Chironomidae communities were related to the chemical composition of the detritus. The chemical components that best explained the composition of the fauna were tannins, the C:N ratio, calcium, and magnesium. However, the functional feeding groups were explained by the chemical variables organic matter and C:N. This study found that the exposure time of the detritus and therefore its level of degradation and chemical composition are important factors determining the characteristics of the Chironomidae assemblage in subtropical streams.