排序方式: 共有40条查询结果,搜索用时 15 毫秒
1.
2.
A. R. Rahmani A. H. Mahvi A. R. Mesdaghinia S. Nasseri 《International Journal of Environmental Science and Technology》2004,1(2):125-133
Ammonia nitrogen compounds in the wastewaters and effluents have harmful effects on water resources. Ion exchange with zeolites is a separation process for ammonia removal from effluents. The objective of this research was to study the efficiency of an ammonia removal and the factor affecting to this process. The Clinoptilolite was obtained from Semnan mines at the north part of Iran. The samples were grounded and sieved based on the U.S. standard mesh number 20, 30, 40 and conditioned by ammonia sulfate and sodium chloride solutions. The characteristics of samples for ammonia removal and the selectivity sequence for adsorbing interfering cations were then determined. Results shown that the average ion exchange capacity of zeolite in batch and continuous systems were 6.65–16 and 16.31–19.5 mg NH4 + /g zeolite weight, respectively. In study on the zeolite for selective cations showed the ranking of K+, NH4 +, Na+, Ca2+ and Mg2+ respectively. Results indicated that high level of regeneration (95–98%) might be achieved with NaCl solution. Based on the results, Clinoptilolite may be effective applied in wastewater treatment, both from technical and economical aspects. 相似文献
3.
4.
Mahmoud Behnia Ahmad Rahmani Shahraki Zabihallah Moradian 《Geotechnical and Geological Engineering》2018,36(4):1975-1989
Many surface and underground structures are constructed in heterogeneous rock formations. These formations have a combination of weak and strong rock layers. Due to the alternation of the weak and strong layers, selecting the equivalent and appropriate geomechanical parameters for these formations is challenging. One of these problems is choosing the equivalent strength (i.e., uniaxial compressive strength) of intact rock for a group of rocks. Based on the volume of weak and strong parts and their strength, the equivalent strength of heterogeneous rocks changes. Marinos and Hoek (Bull Eng Geol Environ 60(2):85–92, 2001) presented the “weighted average method” for defining the uniaxial compressive strength (UCS) of heterogeneous rock masses based on the volume of weak and strong parts. Laubscher (1977) used the volume ratio of the strength of a weak part to a strong part (UCS weak/UCS strong) to determine the equivalent strength. In this study, the two methods are compared and their validity is evaluated by experimental data and numerical analyses. The geomechanical parameters of two heterogeneous formations (Aghajari and Lahbari) in the west of Iran were estimated using these methods. The results of the present study obtained through numerical analyses using particle flow code are compared with those of previous studies and discussed. Laboratory and numerical results show UCS decrease and approach to weak strength with an increasing in volume of weak part. When strength ratio of strong to weak rock increase, equivalent strength decrease more severely. The findings show that Laubscher’s method gives more appropriate results than the weighted average method. 相似文献
5.
Abdallah Yacine Rahmani Nouredine Bourahla Rita Bento Mohamed Badaoui 《Bulletin of Earthquake Engineering》2018,16(1):315-339
In recent years, nonlinear static procedures (NSPs) have gained considerable popularity as an efficient tool in the performance based seismic design practice. This was backed by extensive corroboration studies that have demonstrated its good accuracy in estimating the seismic response of regular structures. Despite the numerous improvements of the original versions of NSPs, their use to assess the seismic response of irregular structures and high-rise buildings is still challenging; they are not able to predict with sufficient accuracy all the complexities associated to the seismic response of this type of structures. Thus, an improved upper-bound (IUB) pushover procedure for seismic assessment of plane frames is presented in this paper, aiming to enhance the accuracy of existing methods in predicting the seismic behaviour of high-rise buildings. The novelty of this proposal is based on the adjustment of the pattern of the lateral load of the upper-bound pushover method applied to tall structures. The accuracy of the procedure is tested using nine, twelve, fifteen and twenty storeys steel buildings. The results of the (IUB) are compared to those of the capacity spectrum method, the modal pushover analysis, the upper bound pushover analysis, the modified upper bound pushover analysis and the non-linear time history analysis (NTHA). In most cases, the proposed procedure shows better results and closer to those obtained by NTHA. 相似文献
6.
Mohammad Hadi Moeini Amir Etemad-Shahidi Vahid Chegini Iraj Rahmani 《Ocean Dynamics》2012,62(5):785-797
The main goal of this study is to develop an efficient approach for the assimilation of the hindcasted wave parameters in
the Persian Gulf. Hence, the third generation SWAN model was employed for wave modeling forced by the 6-h ECMWF wind data
with a resolution of 0.5°. In situ wave measurements at two stations were utilized to evaluate the assimilation approaches.
It was found that since the model errors are not the same for wave height and period, adaptation of model parameter does not
result in simultaneous and comprehensive improvement of them. Therefore, an approach based on the error prediction and updating
of output variables was employed to modify wave height and period. In this approach, artificial neural networks (ANNs) were
used to estimate the deviations between the simulated and measured wave parameters. The results showed that updating of output
variables leads to significant improvement in a wide range of the predicted wave characteristics. It was revealed that the
best input parameters for error prediction networks are mean wind speed, mean wind direction, wind duration, and the wave
parameters. In addition, combination of the ANN estimated error with numerically modeled wave parameters leads to further
improvement in the predicted wave parameters in contrast to direct estimation of the parameters by ANN. 相似文献
7.
Evaluating the effectiveness of a hybrid sorbent resin in removing fluoride from water 总被引:1,自引:1,他引:0
M. Rahmani Boldaji A. H. Mahvi S. Dobaradaran S. S. Hosseini B.Sc. 《International Journal of Environmental Science and Technology》2009,6(4):629-632
In some regions of the world, the concentration of fluoride in groundwater is high. To reduce the amount of fluoride to acceptable drinking water standard, it is highly recommended to treat the water. Fluoride adsorption in aqueous solution by a hybrid resin was studied in this research because of its functional groups likeness with goethite. Kinetic data showed that F adsorption was rapid in the beginning and maximum uptake occurred in within 10 min and equilibrium reached within 100 min. The experimental results showed that fluoride adsorption was influenced by pH of solution and optimum operating pH was in the range of 3 to 5.5. Langmuir model was applicable to the present study and F ions were exchanged with hydroxide ions in nano-scaled structure on the surface of sorbent. This adsorbent with 61 % efficiency is suitable for the regions where F concentration is less than 4 mg/L. 相似文献
8.
A 54‐story steel, perimeter‐frame building in downtown Los Angeles, California, is identified by a wave method using records of the Northridge earthquake of 1994 (ML = 6.4, R = 32 km). The building is represented as a layered shear beam and a torsional shaft, characterized by the corresponding velocities of vertically propagating waves through the structure. The previously introduced waveform inversion algorithm is applied, which fits in the least squares sense pulses in low‐pass filtered impulse response functions computed at different stories. This paper demonstrates that layered shear beam and torsional shaft models are valid for this building, within bands that include the first five modes of vibration for each of the North–South (NS), East–West (EW), and torsional responses (0–1.7 Hz for NS and EW, and 0–3.5 Hz for the torsional response). The observed pulse travel time from ground floor to penthouse level is τ ≈1.5 s for NS and EW and τ ≈ 0.9 s for the torsional responses. The identified equivalent uniform shear beam wave velocities are βeq ≈ 140 m/s for NS and EW responses, and 260 m/s for torsion, and the apparent Q ≈ 25 for the NS and torsional, and ≈14 for the EW response. Across the layers, the wave velocity varied 90–170 m/s for the NS, 80–180 m/s for the EW, and 170–350 m/s for the torsional responses. The identification method is intended for use in structural health monitoring. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
9.
Anisotropic emission of gravitational waves during the merger of black holes induces a recoil velocity on the centre of mass of the binary and the final merger product can then be ejected from its host galaxy. We consider ejected black holes which stay on bound orbits around their host haloes. A recoiled black hole which moves on an almost radial orbit outside the virial radius of its central galaxy, in the cold dark matter background, reaches its apapsis in a finite time. Due to small dark matter velocity dispersion at high redshifts and also the small black hole velocity near the apapsis passage a high-density wake forms around these black hole. Gamma-ray emission can result from the enhancement of dark matter annihilation in these wakes. The diffuse high-energy gamma-ray background from the ensemble of such black holes in the Hubble volume is also evaluated. 相似文献
10.