Heat flow and crustal thermal structure in the Late Archaean Closepet Granite batholith,south India

The Late Archaean Closepet Granite batholith in south India is exposed at different crustal levels grading from greenschist facies in the north through amphibolite and granulite facies in the south along a ∼400 km long segment in the Dharwar craton. Two areas, Pavagada and Magadi, located in the Main Mass of the batholith, best represent the granitoid of the greenschist and amphibolite facies crustal levels respectively. Heat flow estimates of 38 mW m⁻² from Pavagada and 25 mW m⁻² from Magadi have been obtained through measurements in deep (430 and 445 m) and carefully sited boreholes. Measurements made in four boreholes of opportunity in Pavagada area yield a mean heat flow of 39 ± 4 (s.d.) mW m⁻², which is in good agreement with the estimate from deep borehole. The study, therefore, demonstrates a clear-cut heat flow variation concomitant with the crustal levels exposed in the two areas. The mean heat production estimates for the greenschist facies and amphibolite facies layers constituting the Main Mass of the batholith are 2.9 and 1.8 μW m⁻³, respectively. The enhanced heat flow in the Pavagada area is consistent with the occurrence of a radioelement-enriched 2-km-thick greenschist facies layer granitoid overlying the granitoid of the amphibolite facies layer which is twice as thick as represented in the Magadi area. The crustal heat production models indicate similar mantle heat flow estimates in the range 12–14 mW m⁻², consistent with the other parts of the greenstone-granite-gneiss terrain of the Dharwar craton.     

Effect of time and space partitioning strategies of samples on regional landslide susceptibility modelling

Landslides - Assessment of the spatial probability of future landslide occurrences for disaster risk reduction is done through landslide susceptibility modelling. In this study, we investigated the...     

A real-time software backend for the GMRT

The new era of software signal processing has a large impact on radio astronomy instrumentation. Our design and implementation of a 32 antennae, 33 MHz, dual polarization, fully real-time software backend for the GMRT, using only off-the-shelf components, is an example of this. We have built a correlator and a beamformer, using PCI-based ADC cards and a Linux cluster of 48 nodes with dual gigabit inter-node connectivity for real-time data transfer requirements. The highly optimized compute pipeline uses cache efficient, multi-threaded parallel code, with the aid of vectorized processing. This backend allows flexibility in final time and frequency resolutions, and the ability to implement algorithms for radio frequency interference rejection. Our approach has allowed relatively rapid development of a fairly sophisticated and flexible backend receiver system for the GMRT, which will greatly enhance the productivity of the telescope. In this paper we describe some of the first lights using this software processing pipeline. We believe this is the first instance of such a real-time observatory backend for an intermediate sized array like the GMRT.     

Uranium geochemistry in groundwater from tertiary sediments

Dissolved U concentrations and activity ratios (ARs) of the U isotopes in the ²³⁸U decay series were measured in ground and surface waters as part of an investigation to delineate the water quality in a proposed uranium mining area of northwest Nebraska. In oxidizing groundwaters from 67 wells completed in the Tertiary sediments, increasing U concentrations in the direction of groundwater flow generally were associated with a maturation of the formation water as evidenced by evolutionary trends in major ion character. The increased U levels probably are associated with leaching as shown by the positive correlation between U concentrations and total dissolved solids (TDS) (r = +0.83). The inverse relationships between TDS and U ARs (r = ?0.73) and U levels and ARs (r = 0.72) indicate that the decay of excess U-234 is related to maturation of the formation water and to sediment leaching along the flowpath. The data are described by a model which incorporates etching, decay and recoil and suggests that aquifer residence time can be estimated from the TDS level.The levels of soluble U in a reducing uraniferous hydrogeologic unit near Crawford, Nebraska are affected by the proximity of the sample collection to ore. In groundwater samples having similar chemistries (Na-SO₄ + Cl type), similar Ehs, and collected from a close-knit pattern, U concentrations ranged from 0.01 to 2,037 μg l^?1 and ARs ranged from 0.75 to 12.6. This high variability in U levels and ARs is indicative of uranium ore in small areal studies where low ARs almost always are associated with high U concentrations.     

Why chromatic imaging matters

During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u ? v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.     

Natural Attenuation of Perchlorate in Denitrified Groundwater

Monitoring of a well‐defined septic system groundwater plume and groundwater discharging to two urban streams located in southern Ontario, Canada, provided evidence of natural attenuation of background low level (ng/L) perchlorate (ClO₄^?) under denitrifying conditions in the field. The septic system site at Long Point contains ClO₄^? from a mix of waste water, atmospheric deposition, and periodic use of fireworks, while the nitrate plume indicates active denitrification. Plume nitrate (NO₃^?‐N) concentrations of up to 103 mg/L declined with depth and downgradient of the tile bed due to denitrification and anammox activity, and the plume was almost completely denitrified beyond 35 m from the tile bed. The ClO₄^? natural attenuation occurs at the site only when NO₃^?‐N concentrations are <0.3 mg/L, after which ClO₄^? concentrations decline abruptly from 187 ± 202 to 11 ± 15 ng/L. A similar pattern between NO₃^?‐N and ClO₄^? was found in groundwater discharging to the two urban streams. These findings suggest that natural attenuation (i.e., biodegradation) of ClO₄^? may be commonplace in denitrified aquifers with appropriate electron donors present, and thus, should be considered as a remediation option for ClO₄^? contaminated groundwater.     

Simulation of the annual and diurnal cycles of rainfall over South Africa by a regional climate model

The capability of a current state-of-the-art regional climate model for simulating the diurnal and annual cycles of rainfall over a complex subtropical region is documented here. Hourly rainfall is simulated over Southern Africa for 1998–2006 by the non-hydrostatic model weather research and forecasting (WRF), and compared to a network of 103 stations covering South Africa. We used five simulations, four of which consist of different parameterizations for atmospheric convection at a 0.5 × 0.5° resolution, performed to test the physic-dependency of the results. The fifth experiment uses explicit convection over tropical South Africa at a 1/30° resolution. WRF simulates realistic mean rainfall fields, albeit wet biases over tropical Africa. The model mean biases are strongly modulated by the convective scheme used for the simulations. The annual cycle of rainfall is well simulated over South Africa, mostly influenced by tropical summer rainfall except in the Western Cape region experiencing winter rainfall. The diurnal cycle shows a timing bias, with atmospheric convection occurring too early in the afternoon, and causing too abundant rainfall. This result, particularly true in summer over the northeastern part of the country, is weakly physic-dependent. Cloud-resolving simulations do not clearly reduce the diurnal cycle biases. In the end, the rainfall overestimations appear to be mostly imputable to the afternoon hours of the austral summer rainy season, i.e., the periods during which convective activity is intense over the region.     

Genetic reinterpretation of crystallographicintergrowths of jacobsite andhausmannite from natural assemblages

Summary Crystallographic intergrowths of jacobsite and hausmannite (vredenburgite) occur in association with braunite in the Precambrian Sausar Group of rocks, India, that were metamorphosed under 600-700°C and P 6 kb. Quartz, hematite, rhodochrosite and a later hausmannite may occasionally occur as minor associates. Detailed characterization of the intergrown phases reveals that hausmannite lamellae, oriented in 4 or 5 crystallographic directions in the jacobsite host, show a wide variation in thickness and tapered intersections at low angles. The lamellae may be locally deformed. Analytical data reveal that the composition of natural hausmannite and jacobsite in the intergrowths cannot be approximated within the system Fe₃O₄ -Mn₃O₄, as has been conventionally done. These really belong to the Fe₂O₃-Mn₃O₄ subsystem. In the two phase intergrowths, hausmannite is depleted and the jacobsite is enriched in Fe in higher grade rocks. Mineral associations and petrographic considerations suggest that the jacobsite-hausmannite intergrowth originated through prograde decarbonation-oxidation reactions of a carbonatic precursor in an unbuffered X CO₂ situation, but f O₂ was held between hematite-magnetite and bixbyite-hausmannite buffers at the ambient physical conditions of metamorphism. Subsequent oxidation yielded a strong oxygenbuffering assemblage jacobsite, hausmannite, braunite, hematite and quartz. This study negates the commonly held idea that hausmannite jacobsite crystallographic intergrowth (vredenburgite) originates through unmixing of a high ([ldvredenburgite) originates through unmixing of a high temperature spinel_ss temperature spinel_ss during cooling.

---

Genetische Reinterpretation der kristallographischen Verwachsungen von Jakobsit und Hausmannit in natürlichen Vorkommen

Zusammenfassung Kristallographische Verwachsungen von Jakobsit und Hausmannit (Vredenburgit) treten in Verbindung mit Braunit in Gesteinen der präkambrischen Sausargruppe in Indien auf. Die Gesteine wurden bei Drucken von ca. 6 kbar und Termperaturen von 600–700°C metamorphosiert. Quarz, Hämatit, Rhodochrosit, und Hausmannit als Spätphase treten gelegentlich als untergeordnete Gemengteile auf. Hausmannit-Lamellen, die in vier oder fünf kristallographischen Richtungen in Jakobsit orientiert sind, haben sehr unterschiedliche Durchmesser und bilden versetzte Zwickel in kleinem Winkel mit dem Jakobsit. Die Lamellen können lokal deformiert sein. Analytische Daten zeigen, daß die Zusammensetzung von natürlichem Hausmannit und Jakobsit in Verwachsungen nicht, wie bisher angenommen, in dem System Fe₃O₄-Mn₃O₄ dargestellt werden kann. Diese Verwachsungen gehören vielmehr in das Fe₂O₃-Mn₃O₄ System. In höher-gradigen metamorphen Gesteinen ist Fe in zwei-phasigen Verwachsungen im Hausmannit ab- und im Jakobsit angereichert. Die Mineralzusammensetzung und petrographische Gesichtspunkte lassen darauf schließen, daß die Jakobsit/Hausmannit Verwachsung durch prograde Dekarbonatisierung/Oxydationsreaktion eines karbonatischen Vorläufers in einem nicht gepufferten X CO₂ Milieu entstanden ist. F O₂ wurde durch Hämatit-Magnetit und Bixbyit-Hausmannit Puffer unter den gegebenen physikalischen Bedingungen der Metamorphose stabil gehalten. Eine nachfolgende Oxydation führte zu einer starken Sauerstoff-puffernden Assoziation von Jakobsit, Hausmannit, Braunit, Hämatit und Quarz. Diese Untersuchungen widerlegen die allgemein verbreitete Ansicht, daß die kristallographische Verwachsung von Hausmannit und Jakobsit (Vredenburgit) durch Entmischung eines Hochtemperatur-Spinells während der Abkühlung entstanden ist.

---

---

With 1 figure     

Mineralogy and geochemistry of banded iron formation and iron ores from eastern India with implications on their genesis

The geological complexities of banded iron formation (BIF) and associated iron ores of Jilling-Langalata iron ore deposits, Singhbhum-North Orissa Craton, belonging to Iron Ore Group (IOG) eastern India have been studied in detail along with the geochemical evaluation of different iron ores. The geochemical and mineralogical characterization suggests that the massive, hard laminated, soft laminated ore and blue dust had a genetic lineage from BIFs aided with certain input from hydrothermal activity. The PAAS normalized REE pattern of Jilling BIF striking positive Eu anomaly, resembling those of modern hydrothermal solutions from mid-oceanic ridge (MOR). Major part of the iron could have been added to the bottom sea water by hydrothermal solutions derived from hydrothermally active anoxic marine environments. The ubiquitous presence of intercalated tuffaceous shales indicates the volcanic signature in BIF. Mineralogical studies reveal that magnetite was the principal iron oxide mineral, whose depositional history is preserved in BHJ, where it remains in the form of martite and the platy hematite is mainly the product of martite. The different types of iron ores are intricately related with the BHJ. Removal of silica from BIF and successive precipitation of iron by hydrothermal fluids of possible meteoric origin resulted in the formation of martite-goethite ore. The hard laminated ore has been formed in the second phase of supergene processes, where the deep burial upgrades the hydrous iron oxides to hematite. The massive ore is syngenetic in origin with BHJ. Soft laminated ores and biscuity ores were formed where further precipitation of iron was partial or absent.