Turnover of hepatic hemoproteins in rainbow trout

The hepatic mixed function oxidase system in the fish differs from that in mammals in its responses to the two classic mammalian inducers. The cytochrome P-448-type inducers (polycyclic aromatic hydrocarbons) stimulate monooxygenase activity, but phenobarbital, a P-450-type inducer, does not.¹ We have compared the effects of phenobarbital (PB) and polychlorinated biphenyls (PCB) on the turnover of hepatic microsomal hemoproteins in trout (PCB's are P-448- and P-450-type inducers in mammals, which in fish induce only cytochrome P-448). We show here that neither PCB nor PB treatment changed the turnover rate. However, both the rates of synthesis and degradation were much slower than in the rat.     

An analysis of 3.5 kHz acoustic reflections and sediment physical properties

Near-bottom normal incidence acoustic reflection data and sediment physical property data are used to study the relationships between acoustic reflections and sediment physical properties. A pinger-hydrophone experiment was performed to obtain the necessary acoustic reflection data. In addition, a standard piston core was retrieved in the acoustic survey area for physical property analysis. The piston core was sampled and 13 properties were measured at 55 locations within the top 12 m of the core. Correlation studies amongst the sediment physical properties resulted in the following strong correlations: acoustic impedance ($\text{Z}$) and porosity ($\text{N}$), (0.96); water content ($\text{WC}$) and $\text{Z}$, (0.95); bulk density ($\text{BD}$) and $\text{Z}$, (0.99).The empirical orthonormal function (EOF) method was employed for acoustic signal analysis. This method assumes no a-priori models of the sediment or causality. The EOF method reduced the acoustic data to 8 functions that contained 97.6% of the sample variance. The EOFs were subsequently analysed by using cepstrum analysis which reveals time delay information and enhances detecting zones of reflectivity. The result of the sediment physical property and cepstrum analysis indicates that zones of reflectivity are essentially zones of relatively high acoustic impedance, low porosity, and low phi (high mean grain size).     

Holocene sedimentation of a wave-dominated barrierisland shoreline: Cape Lookout, North Carolina

The sedimentary record of 130 km of microtidal (0.9 m tidal range) high wave energy (1.5 m average wave height) barrier island shoreline of the Cape Lookout cuspate foreland has been evaluated through examination of 3136 m of subsurface samples from closely spaced drill holes. Holocene sedimentation and coastal evolution has been a function of five major depositional processes: (1) eustatic sea-level rise and barrier-shoreline transgression; (2) lateral tidal inlet migration and reworking of barrier island deposits; (3) shoreface sedimentation and local barrier progradation; (4) storm washover deposition with infilling of shallow lagoons; and (5) flood-tidal delta sedimentation in back-barrier environments.

Twenty-five radiocarbon dates of subsurface peat and shell material from the Cape Lookout area are the basis for a late Holocene sea-level curve. From 9000 to 4000 B.P. eustatic sea level rose rapidly, resulting in landward migration of both barrier limbs of the cuspate foreland. A decline in the rate of sea-level rise since 4000 B.P. resulted in relative shoreline stabilization and deposition of contrasting coastal sedimentary sequences. The higher energy, storm-dominated northeast barrier limb (Core and Portsmouth Banks) has migrated landward producing a transgressive sequence of coarse-grained, horizontally bedded washover sands overlying burrowed to laminated back-barrier and lagoonal silty sands. Locally, ephemeral tidal inlets have reworked the transgressive barrier sequence depositing fining-upward spit platform and channel-fill sequences of cross-bedded, pebble gravel to fine sand and shell. Shoreface sedimentation along a portion of the lower energy, northwest barrier limb (Bogue Banks) has resulted in shoreline progradation and deposition of a coarsening-up sequence of burrowed to cross-bedded and laminated, fine-grained shoreface and foreshore sands. In contrast, the adjacent barrier island (Shackleford Banks) consists almost totally of inlet-fill sediments deposited by lateral tidal inlet migration. Holocene sediments in the shallow lagoons behind the barriers are 5–8 m thick fining-up sequences of interbedded burrowed, rooted and laminated flood-tidal delta, salt marsh, and washover sands, silts and clays.

While barrier island sequences are generally 10 m in thickness, inlet-fill sequences may be as much as 25 m thick and comprise an average of 35% of the Holocene sedimentary deposits. Tidal inlet-fill, back-barrier (including flood-tidal delta) and shoreface deposits are the most highly preservable facies in the wave-dominated barrier-shoreline setting. In the Cape Lookout cuspate foreland, these three facies account for over 80% of the sedimentary deposits preserved beneath the barriers. Foreshore, spit platform and overwash facies account for the remaining 20%.     

The dissociation constants of carbonic acid in seawater at salinities 5 to 45 and temperatures 0 to 45°C

The pK₁^* and pK₂^* for the dissociation of carbonic acid in seawater have been determined from 0 to 45°C and S = 5 to 45. The values of pK₁^* have been determined from emf measurements for the cell:

Pt](1 − X)H2 + XCO2|NaHCO3, CO2 in synthetic seawater|AgC1; Ag

where X is the mole fraction of CO₂ in the gas. The values of pK₂^* have been determined from emf measurements on the cell:

Pt, H2(g, 1 atm)|Na2CO3, NaHCO3 in synthethic seawater|AgC1; Ag

The results have been fitted to the equations:

lnK^*₁ = 2.83655 − 2307.1266/T − 1.5529413 lnT + (−0.20760841 − 4.0484/T)S^0.5 + 0.08468345S − 0.00654208S¹

InK^*₂ = −9.226508 − 3351.6106/T− 0.2005743 lnT + (−0.106901773 − 23.9722/T)S^0.5 + 0.1130822S − 0.00846934S^1.5

where T is the temperature in K, S is the salinity, and the standard deviations of the fits are σ = 0.0048 in lnK₁^* and σ = 0.0070 in lnK₂^*.Our new results are in good agreement at S = 35 (±0.002 in pK₁^*and ±0.005 in pK₂^*) from 0 to 45°C with the earlier results of Goyet and Poisson (1989). Since our measurements are more precise than the earlier measurements due to the use of the Pt, H₂|AgCl, Ag electrode system, we feel that our equations should be used to calculate the components of the carbonate system in seawater.     

ENSO related modulation of coastal upwelling in the eastern Atlantic

An index of ENSO in the Pacific during early boreal winter is shown to account for a significant part of the variability of coastal SST anomalies measured a few months later within the wind driven West African coastal upwelling region from 10°N to 26°N. This teleconnection is thought to result from an atmospheric bridge between the Pacific and Atlantic oceans, leading to warm (cold) ENSO events being associated with a relaxation (intensification) of the Atlantic trade winds and of the wind-induced coastal upwelling. This ENSO related modulation of the wind-driven coastal upwelling appears to contribute to the connection observed at the basin-scale between ENSO and SST in the north Atlantic. The ability to use this teleconnection to give warnings of large changes in the West African upwelling several months in advance is successfully tested using data from the 1998 and 1999 ENSO events.     

Rapid visualization of plankton abundance and taxonomic composition using the Video Plankton Recorder

Traditional methods for determining spatial distributions of planktonic taxa involve net, pump, and bottle collections followed by the tedious and time-consuming task of plankton sample analysis. Thus, plankton ecologists often require months or even years to process samples from a single study. In this paper, we present a method that allows rapid visualization of the distribution of planktonic taxa while at sea. Rapid characterization of plankton distributions is essential in the dynamic physical environment, where biological and physical patterns can change quickly. Such a “sample-and-observe” capability is necessary for mapping ephemeral features (such as patches, eddies, jets, plumes) and determining appropriate locations to conduct more localized sampling, including in situ observational studies. We describe the techniques used in imaging the plankton, analyzing the video, and visualizing the data. We present an example of at-sea data analysis conducted aboard R.V. Columbus Iselin on Georges Bank in May 1994 and visualizations of the 3-dimensional distribution of selected planktonic taxa in a 2 × 2 km × 90 m volume of seawater. A video of the image processing and visualization is included on the CD-ROM accompanying this volume and is an essential part of this paper.     

The petroleum evaluation of a tectonically complex area: The western margin of the Southeast Basin (France)

The Southeast Basin of France is the thickest onshore French sedimentary basin which contains locally as much as 10 km of Mesozoic-Cenozoic sediment. Basin development occurred in several stages between late Carboniferous and late Cretaceous times. Partial tectonic inversion took place during two compressive events, the so-called ‘Pyrenean’ and ‘Alpine’ phases of late Cretaceous-early Tertiary and late Tertiary ages respectively. They are separated by an intervening stretching event of Oligocene age, which further south resulted in the opening of the western Mediterranean oceanic basin. As a result of this complex tectonic history, structural traps were difficult to image on the seismic data shot during the first phase of exploration prior to 1980. Oil and gas natural seeps, and shows in several wells, indicate that some petroleum systems are, or have been active, at least in some places.The present erosional western margin of the basin is more or less superimposed on the initial Triassic-Jurassic margin. Margin subsidence and Tertiary inversion are discussed using regional sections on which the polyphase history of the entire basin is well shown. These sections are located on three major segments where the Mesozoic margin is either partly preserved (Ardèche), or has been partly inverted in late Tertiary times (Vercors-Chartreuse), or has been completely inverted in early Tertiary times (Corbières-eastern Pyrenees). 1-D ‘Genex’ basin modelling on the Ardèche segment, and 2-D ‘Thrustpack’ structural-maturity modelling in the Vercors-Chartreuse segment are used to further assess the remaining petroleum plays.     

Manganese and iron distributions off central California influenced by upwelling and shelf width

In July 2002, a combination of underway mapping and discrete profiles revealed significant along-shore variability in the concentrations of manganese and iron in the vicinity of Monterey Bay, California. Both metals had lower concentrations in surface waters south of Monterey Bay, where the shelf is about 2.5 km wide, than north of Monterey Bay, where the shelf is about 10 km wide. During non-upwelling conditions over the northern broad shelf, dissolvable iron concentrations measured underway in surface waters reached 3.5 nmol L⁻¹ and dissolved manganese reached 25 nmol L⁻¹. In contrast, during non-upwelling conditions over the southern narrow shelf, dissolvable iron concentrations in surface waters were less than 1 nmol L⁻¹ and dissolved manganese concentrations were less than 5 nmol L⁻¹. A pair of vertical profiles at 1000 m water depth collected during an upwelling event showed dissolved manganese concentrations of 10 decreasing to 2 nmol L⁻¹, and dissolvable iron concentrations of 12–20 nmol L⁻¹ in the upper 100 m in the north, compared to 3.5–2 nmol L⁻¹ Mn and 0.6 nmol L⁻¹ Fe in the upper 100 m in the south, suggesting the effect of shelf width influences the chemistry of waters beyond the shelf.These observations are consistent with current understanding of the mechanism of iron supply to coastal upwelling systems: Iron from shelf sediments, predominantly associated with particles greater than 20 μm, is brought to the surface during upwelling conditions. We hypothesize that manganese oxides are brought to the surface with upwelling and are then reduced to dissolved manganese, perhaps by photoreduction, following a lag after upwelling.Greater phytoplankton biomass, primary productivity, and nutrient drawdown were observed over the broad shelf, consistent with the greater supply of iron. Incubation experiments conducted 20 km offshore in both regions, during a period of wind relaxation, confirm the potential of these sites to become limited by iron. There was no additional growth response when copper, manganese or cobalt was added in addition to iron. The growth response of surface water incubated with bottom sediment (4 nmol L⁻¹ dissolvable Fe) was slightly greater than in control incubations, but less than in the presence of 4 nmol L⁻¹ dissolved iron. This may indicate that dissolvable iron is not as bioavailable as dissolved iron, although the influence of additional inhibitory elements in the sediment cannot be ruled out.     

Analysis of seawater for dissolved cadmium, copper and lead: An intercomparison of voltammetric and atomic absorption methods

An intercomparison study of voltammetric and atomic absorption spectrometric methods for determining cadmium, lead and copper in seawater samples was conducted. The voltammetric approach utilizes differential pulse anodic stripping voltammetry using a rotating, glassy carbon, mercury film electrode under conditions developed to minimize contamination sources and to enhance sensitivity for seawater matrices. The atomic absorption approach involves a concentration step using either an organic solvent extraction of metal dithiocarbamate chelates or a Chelex-100 column with detection by graphite furnace atomic absorption spectrometry. Similar and consistent results were obtained using both methods for the three trace metals studied on a wide range of natural seawater samples. Both methods are comparable in sensitivity for cadmium and copper, however the voltammetric method is better suited for the analysis of lead in seawater because of its enhanced sensitivity and low blank. An advantage of the voltammetric approach is its amenability towards real-time shipboard analysis.