A transdisciplinary analysis of water problems in the mountainous karst areas of Morocco

Water management and engineering in the karstic High Atlas of Morocco are difficult tasks under the prevailing geological, hydrogeological, geomorphological, vegetational and climatic conditions. It is important to be able to understand and predict the characteristics and availability of water for future water planning in the region under changing climatic and agricultural conditions. An interdisciplinary analysis of problems and adequate hydrological modelling tools developed by geologists, hydrologists and biologists are necessary. The karst areas of the High Atlas Mountains are characterised by impermeable triassic basalt underlying substantial subsurface reservoirs with high potential discharge rates. The karst groundwater aquifers are extensive but largely unknown in dimension, probably with a hierarchical network of groundwater flow paths. It is estimated that approximately 70% of the surface water is directly lost to groundwater. Steep landslide- and debris flow prone slopes exist next to coarse-grained, highly porous river beds. Infrequent, high intensity rainfall or snowmelt causes a particularly high flood risk to these karst areas. In addition, agriculture and land use changes have degraded the karst areas. The most important driving forces for degradation include permanent overgrazing even during droughts and the use of firewood by a continually growing population. Large scale degradation of vegetation has occurred in the oro-mediterranean (mountainous Mediterranean) zone, between 2600 and 3400 m which coincides with the most important zone for karstic groundwater creation. The combination of high amounts of groundwater flow and rapid surface flow due to sparse vegetation has increased the problems of flood flow.     

Water and sanitation in the Buenos Aires metropolitan region: Fragmented markets, splintering effects?

This paper discusses the provision of water and sanitation services and the related urban impacts in Buenos Aires circa 2005. The first part of the paper focuses on the metropolitan region (BAMR) which is larger than the area served by the Aguas Argentinas S.A. (AASA) concession (i.e. the capital and its conurbano). It highlights a form of institutional fragmentation that is reflected in the diverse management practices of the numerous service providers and results in differentiated levels of and access to services. The paper discusses the technical, economic and regulatory factors that have historically resulted in this institutional fragmentation. The second part of the article focuses on AASA’s water concession agreement. It demonstrates that, although the agreement had an in-built splintering logic, its implementation led to a more “integrated approach” based on the “reality on the ground”. On the whole, the conclusion regarding the application of the splintering urbanism concept to Buenos Aires is a mixed one and depends on the scale of observation. Although at regional level (BAMR), a form of “institutional fragmentation” would appear to be obvious, it is the result of a long and complex historical process and, while recent neo-liberal reforms in service provisions have “cemented” this fragmentation, they did not actually cause it. If we take the AASA service area in isolation, the trend in the decade following the contracting out of the service has been one of improved service provision and access—although this was not achieved through increased integration of the supply system. Finally, in the case of the Buenos Aires metropolitan region, the splintering urbanism thesis defended by Marvin and Graham needs to be nuanced in several significant ways.     

Boron incorporation into mullite

Summary Boron-doped mullites were synthesized using aluminium nitrate-nonahydrate, tetraethoxysilane and boric acid in a sol–gel process with subsequent annealing at 950 and 1300 °C for five hours. Two different bulk compositions with constant Al₂O₃ contents (60 and 70 mol%, respectively) and varying SiO₂ plus B₂O₃ contents were investigated. X-ray powder diffraction analyses yielded a linear decrease of the lattice parameters with increasing bulk B₂O₃ content, which was interpreted as to be due to boron incorporation. Related to the increasing boron content, corresponding infrared spectra revealed a slight and continuous shift for most of the absorption bands. These data show that mullite is able to incorporate large amounts of boron into its structure (up to about 20 mol% B₂O₃ depending on the bulk composition of the starting materials). Infrared analyses suggest that boron is incorporated into the mullite structure in form of planar three-fold coordinated BO₃ groups. Author’s address: A. Beran, Institut für Mineralogie und Kristallographie, Universit?t Wien-Geozentrum, Althanstra?e 14, 1090 Wien, Austria     

Sur la présence de nickel dans un gisement de bauxite près de Mégare

Résumé L'exploitation récente d'un gisement de bauxite près de Mégare (Grèce) a fait apparaître sur les calcaires de base une concentration verte d'oxyde de nickel relativement élevée. La présence dans le gisement d'argiles rouges, renfermant de fortes proportions d'oxyde de fer avec des teneurs relativement faibles en alumine et des traces d'oxyde de nickel, induit à penser qu'il s'agit d'un produit latéritique dérivé d'une roche ultrabasique et transporté ultérieurement sur la région calcaire karstifiée avec ses remplissages bauxitiques. L'étude se termine par une hypothèse sur la genèse de ce gîte singulier.

---

The recent mining of a bauxite deposit near Megara (Greece) has shown on the footwall limestone a relatively high concentration of a green nickel oxide. The occurrence in the same deposit of red clays with a rather high percentage of iron oxide and a low content of alumina, together with some traces of nickel, induces to think that this material is composed of a lateritic soil derived from an ultrabasic rock and subsequently transported on karstified limestone with its bauxitic fillings. — The study ends with an hypothesis on the genesis of this unusual deposit.

     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Development of two novel CYP-antibodies and their use in a PCB exposure experiment with Mytilus edulis

In an attempt to learn more about the cytochrome P450 (CYP) system of mussels, we used protein databases and alignment software to extract highly conserved CYP sequences. From these alignments synthetic peptides were produced and used for rabbit immunisation, which yielded polyclonal antibodies against the CYP families 2 and 4. The antibodies were evaluated with Western Blot and ELISA assays, using digestive gland microsomal samples from the mussel Mytilus edulis. Western Blots revealed immunoreactions for both antibodies. The anti-CYP2 sequence rendered one major immunopositive protein of ≈49 kDa size, and weak signals for proteins of ≈41 and 56 kDa size. The anti-CYP4 sequence rendered two major bands of ≈56 and 59 kDa size, and also a weak immunoreaction with a protein of ≈43 kDa size. ELISA rendered only weak signals even with a 1:50 dilution of IgG-purified serum. A 10-day exposure to Aroclor 1254 did not appear to affect any of the immunopositive proteins, while total PCBs in soft bodies increased from 14–40 ng/g DW in controls to 373–638 ng/g DW in exposed mussels.     

Quaternary geology of the Amazonian Lowland

The Quaternary history of the Amazon lowlands is characterized by deposition of sediments of Andean provenance and by the influences of changing sea levels. Areas well above the present water tables were not reached by Pleistocene high-water stages. These areas have been intensively weathered since the Tertiary, forming hard lateritic weathering horizons. These weathering horizons are best explained by the relatively constant, humid tropical climate throughout the Quaternary. In the western Amazonian Lowland, flood plains corresponding to the different Pleistocene sea-level heights were formed. During low sea level, erosion in the drainage areas increased and the water levels of the central Amazon River system were lowered. Valleys drowned and lakes formed in the lower reaches of rivers and creeks during high sea-level stages. These lakes (ria lakes) remained in the valleys with rivers having a low sediment load. Seismic profiling (3.5 kHz) in some of these lakes clearly showed deposits of the three last periods of Quaternary high sea-level stages.     

Paleoenvironment and sea-level change in the early Cretaceous Barents Sea—implications from near-shore marine sapropels

The late Volgian (early "Boreal" Berriasian) sapropels of the Hekkingen Formation of the central Barents Sea show total organic carbon (TOC) contents from 3 to 36 wt%. The relationship between TOC content and sedimentation rate (SR), and the high Mo/Al ratios indicate deposition under oxygen-free bottom-water conditions, and suggest that preservation under anoxic conditions has largely contributed to the high accumulation of organic carbon. Hydrogen index values obtained from Rock-Eval pyrolysis are exceptionally high, and the organic matter is characterized by well-preserved type II kerogen. However, the occurrence of spores, freshwater algae, coal fragments, and charred land-plant remains strongly suggests proximity to land. Short-term oscillations, probably reflecting Milankovitch-type cyclicity, are superimposed on the long-term trend of constantly changing depositional conditions during most of the late Volgian. Progressively smaller amounts of terrestrial organic matter and larger amounts of marine organic matter upwards in the core section may have been caused by a continuous sea-level rise.     

赤潮生物种类特征光谱获取技术

较为系统地研究了赤潮生物水体反射率曲线获取方法。通过对 2类反射率反演方法得出的反射率曲线与实际反射率曲线进行比较 ,得出在不具备大气环境参数的情况下 ,经验线性法的反演结果与实际反射率曲线最接近的结论 ,并进一步对正常海水和赤潮生物水体的光谱特性进行分析 ,提取出赤潮生物水体的特征光谱。这是进行赤潮监测和识别的重要前提