Energy release in solar flares

Team 2 of the Ottawa FLARES 22 Workshop dealt with observational and theoretical aspects of the characteristics and processes of energy release in flares. Main results summarized in this article stress the global character of the flaring phenomenon in active regions, the importance of discontinuities in magnetic connectivity, the role of field-aligned currents in free energy storage, and the fragmentation of energy release in time and space.Report of Team 2, Flares 22 Workshop, Ottawa, May 25–28, 1993.     

Type of volcanoes hosting the massive sulfide deposits of the Iberian Pyrite Belt

The Volcanic Sedimentary Complex (VSC) of the Iberian Pyrite Belt (IPB) in southern Portugal and Spain, comprises an Upper Devonian to Lower Carboniferous submarine succession with a variety of felsic volcanic lithofacies. The architecture of the felsic volcanic centres includes felsic lavas/domes, pyroclastic units, intrusions and minor mafic units that define lava–cryptodome–pumice cone volcanoes. The diversity of volcanic lithofacies recognized in different areas of the IPB mainly reflects variations in proximity to source, but also differences in the eruption style. The IPB volcanoes are intrabasinal, range in length from 2 km to > 8 km and their thickest sections vary from ∼ 400 m to > 800 m. These volcanoes are dominated by felsic lavas/domes that occur at several stratigraphic positions within the volcanic centre, however the pyroclastic units are also abundant and are spatially related to the lavas/domes. The intrusions are minor, and define cryptodomes and partly-extrusive cryptodomes. The hydrothermal systems that formed the Neves Corvo and Lousal massive sulfide ore deposits are associated with effusive units of felsic volcanic centres. At Neves Corvo, the massive sulfide orebodies are associated to rhyolitic lavas that overlie relatively thick fiamme-rich pyroclastic unit. In several other locations within the belt, pyroclastic units contain sulfide clasts that may have been derived from yet to be discovered coeval massive sulfide deposits at or below the sea floor, which enhances the exploration potential of these pyroclastic units and demonstrates the need for volcanic facies analysis in exploration.     

Facies analyses and volcanic setting of the giant Neves Corvo massive sulfide deposit,Iberian Pyrite Belt,Portugal

In the Iberian Pyrite Belt, volcanic rocks are relatively scarce, accounting for approximately only 25% of the geologic record, with the remaining 75% consisting of sedimentary units. This association is very clear in the host succession to the Neves Corvo massive sulfide deposit in Portugal. The Neves Corvo host succession comprises the products of explosive and effusive rhyolitic eruptions intercalated with mudstone that records a submarine below-wave-base environment and provides precise biostratigraphic age constraints. The first and second volcanic events involved eruptions at local intrabasinal vents. The first event generated thick beds of fiamme breccia that are late Famennian in age. The fiamme were originally pumice clasts produced by explosive eruptions and were subsequently compacted. The second event was the late Strunian (latest Famennian) effusion of rhyolitic lava that was pervasively quench-fragmented. The third and final event is younger than the massive sulfide deposits poorly represented in the mine area and minor compared with the two other events. The integration of biostratigraphic data with the volcanic facies architecture indicates that the Neves Corvo ore deposits are similar in age to the late Strunian rhyolitic lava. Although regionally the Iberian Pyrite Belt is essentially a sedimentary succession, ore formation at Neves Corvo can be closely linked to discrete volcanic events that produced a relatively narrow range of volcanic facies.     

Assessment of environmental hazards at abandoned mining sites: A case study in Sardinia,Italy

In the last two centuries, several Pb–Zn mines were active in the Rio Mannu basin near Narcao (SW Sardinia, Italy), but are now abandoned. These abandoned mines pose a serious risk to the population and required an assessment of the hazard sources and the contaminant pathways in the area. The characterization plan of the Rio Mannu basin was carried out according to Italian protocols. Specifically, samples of soil, stream sediment, fine-grained ore-processing waste (from washery and flotation processes), surface water and groundwater have been analyzed in order to assess the levels of contamination in each mine area and the risks in the plains surrounding the site. Several potential chemical contaminants were considered both in solid materials and water samples. The Rosas mine was recognized as the most contaminated area in the basin, due to the presence of a large tailing pond, some fine-grained waste piles and two mine adits with concentrations of the toxic elements As, Cd, Cu, Pb, Sb and Zn exceeding Italian regulatory standards. The dispersion of contaminants occurs downstream from the small stream draining the area. In case of heavy rain the runoff into the streamlet transports the contaminated material far into the plain. The results of this study show that the characterization plan is a relatively cheap tool for establishing mitigation actions, prior to the realization of a complete, and usually expensive, remediation project at abandoned mine sites. Urgent recommended actions in the Rio Mannu basin include the treatment of the adit water prior to its discharge into the Rio Barisonis; the construction of drainage barriers on waste piles to reduce runoff and solid transport into the Rio Barisonis; the consolidation of the earthen dam containing the tailing pond of Rosas to avoid the deepening of erosion furrows that may threaten its stability.     

Benthic invertebrate assemblages and functional feeding groups in the Paraná River floodplain (Argentina)

The benthic invertebrate assemblages and functional feeding groups in different mesohabitats of the Middle Paraná River–floodplain system were analyzed. Benthic invertebrates and bottom sediments were sampled in a secondary channel (center and bank mesohabitats), a temporal marginal fluvial wetland adjacent to the river, an isolated lake and a connected lake during low water level. Cluster analysis of average invertebrate densities based on the Bray Curtis dissimilarity index yielded a group composed by the mesohabitats with higher species richness, the floodplain lakes, banks mesohabitats and the wetland. The center mesohabitat of the main channel characterized by sandy sediments with low organic matter content and the lowest invertebrate densities and species richness was classified separately. Alpha diversity increased from the center mesohabitat (6 taxa) to the adjacent wetland (71 taxa), and were similar between the floodplain lakes (24 and 22 taxa) and the river bank mesohabitat (24 taxa). Gamma and beta diversities (Whittaker index) were 92 and 2.19, respectively. The highest turnover of taxa was between the river and the other mesohabitats and the lowest between floodplain lakes. Detrended correspondence analysis (DCA) showed a clear separation of wetland and banks from other mesohabitats (axis 1 and 2 explained 52.25% variance) explained by shredders and collector-filterers. The other mesohabitats were arranged in a gradient from the main channel mostly related to collector-gatherers to the connected lake and the isolated lake that were mostly characterized by predators and scrapers. The invertebrate assemblage complexity and functional feeding groups composition increased in the lateral dimension, from the center of the main channel to the temporal marginal fluvial wetland due to the influences of the spatial heterogeneity caused by different sources of organic matter inputs.     

Effects of artificial and natural recharge on chemical equilibrium in the Cerro Prieto reservoirs, Baja California, México

Chemical equilibrium modeling studies of two aquifers in the western part of the Cerro Prieto (CP-I) geothermal field were performed to obtain the activities of the main ions and complexes by using the EQQYAC program. The results provided a pH of 6.44 for the deep aquifer, which is slightly higher than the value of 5.5 found for the shallower reservoir. In the northern part of the field, the reservoir pH has decreased up to 1.5 units compared to that modeled for 1990. Variations of pH with respect to time were also found to occur in the southern part of the field. In spite of the large changes in hydrodynamic conditions occurring in the reservoir due to exploitation, the equilibrium between both K- and Na-feldspars and between K-feldspar and K-mica seems to control the chemical composition of the fluids, in both reservoirs.     

The Son Poc rockfall (Mallorca,Spain) on the 6th of March 2013: 3D simulation

The Son Poc rockfall took place on the 6th of March 2013 in the municipality of Bunyola, on the southern side of the Tramuntana Range (Mallorca) and after a rainy and cold period on the region. A volume of rock of 4.000 m³ was detached from the cliff crowning the peak falling down by toppling. The impact of the boulder caused its fragmentation, and numerous boulders bounced and rolled downslope with volumes from 1 to 35 m³, following two trajectories: southwest (SW) and southeast (SE). The SE trajectory, with a larger runout (376 m), reached an urban area, where some of the boulders hit the roofs and walls of nearby houses, stopping others in their gardening areas. Fortunately, no fatalities occurred despite of the presence of some people at that moment, but the event caused great concern in a region which lives from and for tourism. The Son Poc rockfall has been simulated using RocPro3D software which uses GIS technology to produce 3D rockfall trajectories lines, estimated velocity and energy of falling blocks, as well as bounce heights, impacts, and stopping points. The results are in agreement with field observations and with a very good accuracy between real and modeled outcomes.     

Geochemistry and geothermometry of volcanic rocks from Serra Branca, Iberian Pyrite Belt, Portugal

Volcanic rocks from Serra Branca, Iberian Pyrite Belt, Portugal, consist of calc-alkaline felsic and intermediate rocks. The latter are massive andesites, whereas the former include four dacitic to rhyolitic lithologies, distinguishable on spiderdiagrams and binary plots of immobile elements. Zircon thermometry indicates that two felsic suites may have formed from different magmas produced at distinct temperatures, with only limited fractionation within each suite. Alternatively, all the felsic rocks can be related through fractionation of a single magma if the lower zircon saturation temperature obtained for one suite merely results from Zr dilution, mostly reflecting silicification.

The relatively high magma temperatures at Serra Branca ease the classification of felsic rocks based on their HFSE contents and also indicate volcanogenic massive sulfide deposit favorability. This contrasts with other areas of the Belt that register lower magma temperatures and are subsequently barren. However, magma temperatures may have not been high enough to cause complete melting of refractory phases in which HFSE reside during crustal fusion of an amphibolite protolith, implying difficult discrimination of tectonic environments for the felsic rocks. The intermediate rocks were possibly formed by mixing between basaltic magmas and crustal material, compatible with volcanism in an attenuated continental lithosphere setting.