Distortion of tidal currents and the lateral transfer of salt in a shallow coastal plain estuary (O estuário do Mira, Portugal)

We describe the tidal circulation of a coastal plain estuary across a flood tide delta located at its entrance. The area connects the downstream portion of the main estuary extending 30–40 km inland to the more complex delta reach that consists of a shallow main channel and a series of smaller side channels. The delta acts as a frictionally dominated zone that modifies the tidal wave from a simple sinusoid to one with ebb currents that accelerate to maximum early in the tidal cycle and last more than one-half of the tidal cycle. Along smaller side channels, the tidal currents favor stronger flood or ebb currents, depending upon the local surrounding morphology. The phase difference between ebb currents in the small channels relative to those in the main channel cause some of the salt to be retained thus reducing the tendency of freshwater discharge to flush salt out of the system. This mechanism of retention differs from the selective withdrawal mechanism described for this estuary in Blanton et al. (2000).     

Progress and opportunities for monitoring greenhouse gases fluxes in Mexican ecosystems: the MexFlux network

Understanding ecosystem processes from a functional point of view is essential to study relationships among climate variability, biogeochemical cycles, and surface-atmosphere interactions. Increasingly during the last decades, the eddy covariance (EC) method has been applied in terrestrial, marine and urban ecosystems to quantify fluxes of greenhouse gases (e.g., CO₂, H₂O) and energy (e.g., sensible and latent heat). Networks of EC systems have been established in different regions and have provided scientific information that has been used for designing environmental and adaptation policies. In this context, this article outlines the conceptual and technical framework for the establishment of an EC regional network (i.e., MexFlux) to measure the surface-atmosphere exchange of heat and greenhouse gases in Mexico. The goal of the network is to improve our understanding of how climate variability and environmental change influence the dynamics of Mexican ecosystems. First, we discuss the relevance of CO₂ and water vapor exchange between terrestrial ecosystems and the atmosphere. Second, we briefly describe the EC basis and present examples of measurements in terrestrial and urban ecosystems of Mexico. Finally, we describe the conceptual and operational goals at short-, medium-, and long-term scales for continuity of the MexFlux network.     

Spatial concentration and variability of rainfall in the Iguaçu River Basin,State of Paraná−Brazil

The analysis of rainfall as an environmental factor that influences landscape dynamics is an important and ongoing topic of discussion. This discussion can be centred on the discovery of impacts caused by the increase or decrease in rainfall frequency and intensity. From this perspective, this study sought to analyse the rainfall variability in the Iguaçu River basin, located in the State of Paraná, southern Brazil. The main objective was focused on the temporal-spatial rainfall distribution in the study area and its interaction with landscape dynamics (different land uses). Precipitation data for the period 1988−2018 were obtained from the ‘Águas Paraná’ Institute. To calculate the Concentration Index−CI values of the study area, data analysis was performed using the ‘R’ software with Climatol and Precindicon subroutines of the software, and analysis of Landsat 8 satellite images through ArcGIS. The results indicated that there was a well-defined spatial variability in the study area, as the CIs defined higher rainfall concentrations upstream from the river basin and lower rainfall concentrations downstream—implying that these processes may be strongly associated with land use.     

Empirical P-L-C relation for δ scuti stars

Empirical period-luminosity-colour (P-L-C) relations are obtained for the four lowest modes corresponding to radial pulsations. Agreement with predicted values indicates that, in general, both Strömgren photometric calibration and pulsation theory work well for these stars.Paper presented at the 11 th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Undrained instability detection under general stress conditions

Acta Geotechnica - This work proposes a criterion for the detection of undrained instability under multiaxial stress conditions at elemental level. To do so, it develops the application of the...     

Criterion for flow liquefaction instability

This study describes a general liquefaction flow instability criterion for elastoplastic soils based on the concept of loss of uniqueness. We apply the criterion to the general case of axisymmetric loading and invoke the concepts of effective stresses and loss of controllability to arrive at a general criterion for the onset of liquefaction flow. The criterion is used in conjunction with an elastoplastic model for sands to generate numerical simulations. The numerical results are compared with experimental evidence to give the following insights into predicting liquefaction. (1) The onset of liquefaction flow is a state of instability occurring under both monotonic and cyclic tests, and coincides with loss of controllability. (2) The criterion proposed herein clearly and naturally differentiates between liquefaction flow (instability) and cyclic mobility. (3) Flow liquefaction not only depends on the potential of the material to generate positive excess pore pressures, but more importantly, it also depends on the current state of the material, which is rarely predicted by phenomenology.     

A simple and general methodology to calibrate seismic instruments for debris flow quantification: application to Cotopaxi and Tungurahua volcanoes (Ecuador)

Debris flows are hazardous phenomena occurring at volcanoes, and monitoring them has proved as challenging as imperative in several cases. The use of seismic instruments to measure and study the physical properties of debris flows has witnessed significant progress in the last years, with the use of improved sensors, innovative methodologies and high-resolution analysis. However, the application of such studies to the practical task of providing early warnings remains limited by the significant amount of infrastructural and technological resources commonly required for their deployment. In Ecuador, debris flows at volcanoes are detected by means of seismic instruments which are usually part of broader monitoring networks, thus requiring calibration to provide quantitative information about the flows and feed early-warning systems. In the present work, a theoretical approach based on the Buckingham Π-theorem is used to determine an expression that linearly correlates the seismic signal produced by a transiting debris flow with its discharge rate, for instruments installed in different substrata and at variable distances from the drainage. The expression is experimentally tested with Acoustic Flow Monitors and Broad-band seismometers installed in the vicinity of drainages at Tungurahua and Cotopaxi volcanoes, where actual debris flows occurred in relation to eruptive activity. The experiments consist in comparing the measured peak amplitude values of the seismic signal envelopes with the estimated peak discharge rates of several events. The results confirm the validity of the theoretical expression with linear correlations observed between the seismic amplitudes and the discharge rates, thus defining calibration expressions that can be generally applied to varied environments and instruments. The seismic instruments calibrated through this methodology can provide instantaneous and reliable predictions of debris flow discharge rates within less than an order of magnitude and only requiring limited data processing and storage. Such level of prediction could help to improve early warning systems based on seismic instruments installed in locations where more developed instrumental arrays are unavailable or unpractical.

     

Hydrogeochemical controls on shallow alluvial groundwater under agricultural land: case study in central Portugal

A hydrogeochemical study employing graphical, multivariate statistical, and modeling tools was conducted in an area of alluvial deposits in the Mondego river basin, to determine the factors and processes controlling the shallow groundwater chemistry. Groundwater was collected from 29 observation wells in six sampling campaigns, between March 2001 and September 2002. Samples were analyzed for basic physicochemical parameters, major ions and some minor ions. Hierarchical cluster analysis was applied to the data set, including both the spatial and temporal monitoring data and resulted in the definition of eight distinct water types. With the aid of hydrochemical (and physicochemical) scatter plots, it was possible to identify the main processes controlling the groundwater chemistry: (1) evapotranspiration and recharge; (2) calcium and magnesium carbonate and CO₂ dissolution; (3) nitrate leaching from agriculture; (4) oxidation and reduction; and (5) cation exchange. These processes are frequently common to more than one water type but unique in combination and/or extent, in space and/or time. Geochemical modeling of the water types (using PHREEQC) allowed the validation and, to a certain extent, quantification of the processes that affect the shallow groundwater evolution. These tools can provide an essential support for the assessment of groundwater vulnerability to contamination and for the elaboration of groundwater resource management strategies.     

Characterization of microstructural and physical properties changes in biocemented sand using 3D X-ray microtomography

An experimental study has been performed to investigate the effect of the biocalcification process on the microstructural and the physical properties of biocemented Fontainebleau sand samples. The microstructural properties (porosity, volume fraction of calcite, total specific surface area, specific surface area of calcite, etc.) and the physical properties (permeability, effective diffusion) of the biocemented samples were computed for the first time from 3D images with a high-resolution images obtained by X-ray synchrotron microtomography. The evolution of all these properties with respect to the volume fraction of calcite is analysed and compared with success to experimental data, when it is possible. In general, our results point out that all the properties are strongly affected by the biocalcification process. Finally, all these numerical results from 3D images and experimental data were compared to numerical values or analytical estimates computed on idealized microstructures constituted of periodic overlapping and random non-overlapping arrangements of coated spheres. These comparisons show that these simple microstructures are sufficient to capture and to predict the main evolution of both microstructural and physical properties of biocemented sands for the whole range of volume fraction of calcite investigated.