Environmental geochemistry of Zarshuran Au-As deposit, NW Iran

Zarshuran deposit is the most famous and important As-Au mine in Iran. However, there is no information on the impact of mining activity on the surrounding environment, especially on water systems. This paper attempts to document the concentration of arsenic and associated elements in waters and sediments resulting from the mining history of Zarshuran, a period covering hundreds of years. Water and sediment samples collected from Zarshuran Stream indicate high content of some potentially toxic elements, especially of As which ranges from 0.028 to 40 ng/l in water and 182 to 36,000 mg/kg in sediment samples. Mining activity, exposure of a large volume of mining wastes to weathering, and the anomalously high background of trace metals in the mining area are considered to be the main sources of heavy metal pollution.     

Viruses as potential regulators of regional brown tide blooms caused by the alga,Aureococcus anophagefferens

Blooms of the brown tide organismAureccoccus anophagefferens have recurred in the coastal bays in New Jersey since 1995 and in the coastal bays of Long Island since 1985. Intracellular viral-like particles (VLPs) were documented during 1999–2000 brown tide blooms in Little Egg Harbor, New Jersey, but it was not determined whether cells were infected during the termination of the bloom. The objective of this study was to determine if VLPs infected and lysed natural populations ofA. anophagefferens in coastal bays of New Jersey and New York in 2002 with the same frequency as in 1999–2000 and especially at the termination of the bloom. Our results confirmed that the highest percentage (37.5%) of VLP-infected cells occurred at the termination of the brown tide bloom in New Jersey in 2002. Intracellular VLPs were present throughout the bloom event. The percentage of visibly infected cells was higher at the beginning of the bloom than during the peak of the bloom. The intracellular VLPs in natural populations ofA. anophagefferens were consistent in size and shape (approximately 140 nm in diameter) and comparable to those in previous studies. Concentrated viral isolates, prepared from waters during brown tide blooms in New York and New Jersey in 2002, infected healthy laboratoryA. anophagefferens cultures in vitro. The viral isolates associated with the highest laboratory viral activity (lysis positive) were concentrated from water samples having the highest viral and bacteria concentrations. The intracellular viruses in these virally infected laboratory cultures ofA. anophagefferens were similar in size and shape to those found in natural populations. The successful isolation of a virus specific toA. anophagefferens from a brown tide bloom in the field, the similarity of ultrastructure of VLPs infecting both natural populations and laboratory infected cultures, and the pattern of VLP infection during bloom activity in combination with the observed high percentage of VLP-infected cells during bloom termination, supports, the hypothesis that viruses may be a major source of mortality for brown tide blooms in regional coastal bays of New Jersey and New York.     

A parameterisation for the threshold shear velocity to initiate deflation of dry and wet sediment

A new parameterisation for the threshold shear velocity to initiate deflation of dry and wet particles is presented. It is based on the balance of moments acting on particles at the instant of particle motion. The model hence includes a term for the aerodynamic forces, including the drag force, the lift force and the aerodynamic-moment force, and a term for the interparticle forces. The effect of gravitation is incorporated in both terms. Rather than using an implicit function for the effect of the aerodynamic forces as reported earlier in literature, a constant aerodynamic coefficient was introduced. From consideration of the van der Waals force between two particles, it was further shown that the effect of the interparticle cohesion force between two dry particles on the deflation threshold should be inversely proportional to the particle diameter squared. The interparticle force was further extended to include wet bonding forces. The latter were considered as the sum of capillary forces and adhesive forces. A model that expresses the capillary force as a function of particle diameter squared and the inverse of capillary potential was deduced from consideration of the well-known model of Fisher and the Young–Laplace equation. The adhesive force was assumed to be equal to tensile strength, and a function which is proportional to particle diameter squared and the inverse of the potential due to adhesive forces was derived. By combining the capillary-force model and the adhesive force model, the interparticle force due to wet bonding was simplified and written as a function of particle diameter squared and the inverse of matric potential. The latter was loglinearly related to the gravimetric moisture content, a relationship that is valid in the low-moisture content range that is important in the light of deflation of sediment by wind. By introducing a correction to force the relationship to converge to zero moisture content at oven dryness, the matric potential–moisture content relationship contained only one unknown model parameter, viz. moisture content at −1.5 MPa. Working out the model led to a rather simple parameterisation containing only three coefficients. Two parameters were incorporated in the term that applies to dry sediment and were determined by using experimental data as reported by Iversen and White [Sedimentology 29 (1982) 111]. The third parameter for the wet-sediment part of the model was determined from wind-tunnel experiments on prewetted sand and sandy loam aggregates. The model was validated using data from wind-tunnel experiments on the same but dry sediment, and on data obtained from simulations with the model of Chepil [Soil Sci. Soc. Am. Proc. 20 (1956) 288]. The experiments showed that soil aggregates should be treated as individual particles with a density equal to their bulk density. Furthermore, it was shown that the surface had to dry to a moisture content of about 75% of the moisture content at −1.5 MPa before deflation became sustained. The threshold shear velocities simulated with our model were found to be in good agreement with own observations and with simulations using Chepil's model.     

The International GPS Service tracking network: Enabling diverse studies and projects through international cooperation

The International GPS Service (IGS), formulated beginning in 1989 and formalized in 1994, was founded on the collaborative operation of approximately 30 permanent GPS stations to benefit global geodynamics. The same cooperative principles, today applied to a network of over 300 stations, still serve to maximize global benefit without unnecessary duplication of investment in global infrastructure. The scope of applications of the dataset has grown to include atmospheric, oceanographic, subdaily, and low-earth orbiter activities through working groups and pilot projects fostered within the IGS in the now traditional IGS spirit of collaboration. These activities and the IGS infrastructure are viewed as critical elements to the Global Geodetic Observing System. This presentation will review the present nature of the IGS tracking network and its ability to support new applications.     

Crystal chemistry of titanite-structured compounds: the CaTi1-x Zr x OSiO4 (x≤0.5) series

Inhomogeneous aggregates of late-stage titanite enriched in Zr have been described recently from post-magmatic parageneses in silica-undersaturated rocks. In the natural samples, simple isovalent substitution of the large Zr (^[vi]R⁴⁺=0.72 Å) for Ti (^[vi]R⁴⁺=0.605 Å) is limited to an empirical maximum of 0.25 afu (15.3 wt.% ZrO₂). As the natural material is not suitable for crystallographic study, a series of CaTi_1-xZr_xOSiO₄ titanite samples have been synthesized by standard ceramic methods at ambient pressure in air, and their crystal structure determined by Rietveld refinement of laboratory powder X-ray diffraction patterns. All of the synthetic Zr-doped titanite varieties adopt space group A2/a and consist of distorted CaO₇ polyhedra together with less distorted (Ti_1-xZr_x)O₆ octahedra and SiO₄ tetrahedra. Cell dimensions and atomic coordinates together with volumes and distortion indices are given for all polyhedra. The empirical limit for Zr substitution in synthetic (F,OH)-free titanite is 0.5 afu (29.6 wt.% ZrO₂). The existence of a Zr analogue of titanite in nature is considered to be unlikely.     

Petrology of the Jurassic Shah-Kuh granite (eastern Iran), with reference to tin mineralization

The Shah-Kuh granitic pluton of eastern Central Iran was emplaced 165 Ma ago, in an active continental margin setting. It is made of two main units: a granodioritic unit (SiO₂=63–71 wt%) to the north–west and a syenogranitic unit (SiO₂=73–77 wt%) to the south–east. The former unit displays seriate medium-grained textures and contains locally abundant mafic enclaves. The latter unit is medium- to coarse-grained and porphyritic, with 0.5–3 cm long K-feldspar megacrysts. Fine-grained granitic bodies are present in both units. The rocks are metaluminous to slightly peraluminous (I-type) and peraluminous (S-type) and belong to the ilmenite-series granites. Fractional crystallization appears to have been a very effective differentiation process in both units, and the fractionated mineral assemblages are determined by mass balance calculations. Isotopic data (Sr_i=0.7065 and εNdt=−2.5) are consistent with a young upper crustal protolith. Tin mineralization in sheeted quartz-tourmaline (-cassiterite) veins is spatially associated with the granodioritic unit. The veins formed by hydraulic fracturing when the granodioritic to monzogranitic magma became water-saturated and exsolved a fluid phase during crystallization. The reduced nature of this magma is responsible for the incompatible behaviour of Sn, likely to favour Sn concentration in the residual melt and then in the exsolved fluid. Another fluid phase was exsolved by the syenogranitic magma and was responsible for local greisenized granites, characterized by high Y and HREE-contents and non-fractionated REE distribution patterns. Field and mineralogical data show that the (B, Sn) vein-forming fluid was different from the (F, Li) greisen-forming fluid.