Evaporation from boreal reservoirs: A comparison between eddy covariance observations and estimates relying on limited data

Hydrological models used for reservoir management typically lack an accurate representation of open-water evaporation and must be run in a scarce data context. This study aims to identify an accurate means to estimate reservoir evaporation with simple meteorological inputs during the open-water season, using long-term eddy covariance observations from two boreal hydropower reservoirs with contrasting morphometry as reference. Unlike the temperate water bodies on which the majority of other studies have focused, northern reservoirs are governed by three distinct periods: ice cover in the cold season, warming in the summer and energy release in the fall. The reservoirs of interest are Eastmain-1 (52°N, mean depth of 11 m) and Romaine-2 (51°N, mean depth of 42 m), both located in eastern Canada. Four approaches are analysed herein: a combination approach, a radiation-based approach, a mass-transfer approach, and empirical methods. Of all the approaches, the bulk transfer equation with a constant Dalton number of 1.2 x 10⁻³ gave the most accurate estimation of evaporation at hourly time steps, compared with the eddy covariance observations (RMSE of 0.06 mm h⁻¹ at Eastmain-1 and RMSE of 0.04 mm h⁻¹ at Romaine-2). The daily series also showed good accuracy (RMSE of 1.38 mm day⁻¹ at Eastmain-1 and RMSE of 0.62 mm day⁻¹ at Romaine-2) both in the warming and energy release phases of the open-water season. The bulk transfer equation, on the other hand, was incapable of reproducing condensation episodes that occurred soon after ice breakup. Basic and variance-based sensitivity analyses were conducted, in particular to measure the variation in performance when the bulk transfer equation was applied with meteorological observations collected at a certain distance (~10–30 km) from the reservoir. This exercise illustrated that accurate estimates of open water evaporation require representative measurements of wind speed and water surface temperature.     

Social actors and their role in metropolitan governance in Montréal: towards an inclusive coalition?

The article is about the role of civil society organizations in the governance of the Montréal metropolitan region. It identifies a high level of cooperation around metropolitan scale issues on the part of these organizations. In the Montréal region, government agencies as well as private corporations demonstrate readiness to work alongside civil society organizations on joint projects. Evidence of this type of collaboration is particularly strong in the case of economic development, neighbourhood revitalization and cultural initiatives. This form of cooperation is perceived as a manifestation of the so-called “Québec model” and is an asset for the Montréal metropolitan region. The article demonstrates that interventions that involve social organizations are more likely to be successful than those that turn their back on these organizations.     

Future changes in Central Europe heat waves expected to mostly follow summer mean warming

Daily output from the PRUDENCE ensemble of regional climate simulations for the end of the twentieth and twenty-first centuries over Europe is used to show that the increasing intensity of the most damaging summer heat waves over Central Europe is mostly due to higher base summer temperatures. In this context, base temperature is defined as the mean of the seasonal cycle component for those calendar days when regional heat waves occur and is close, albeit not identical, to the mean temperature for July–August. Although 36–47% of future Central Europe July and August days at the end of the twenty-first century are projected to be extreme according to the present day climatology, specific changes in deseasonalized heat wave anomalies are projected to be relatively small. Instead, changes in summer base temperatures appear much larger, clearly identifiable and of the same order of magnitude as changes in the whole magnitude of heat waves. Our results bear important consequences for the predictability of central European heat wave intensity under global warming conditions.     

Comparison between real‐time dynamic substructuring and shake table testing techniques for nonlinear seismic applications

Results from real‐time dynamic substructuring (RTDS) tests are compared with results from shake table tests performed on a two‐storey steel building structure model. At each storey, the structural system consists of a cantilevered steel column resisting lateral loads in bending. In two tests, a slender diagonal tension‐only steel bracing member was added at the first floor to obtain an unsymmetrical system with highly variable stiffness. Only the first‐storey structural components were included in the RTDS test program and a Rosenbrock‐W linearly implicit integration scheme was adopted for the numerical solution. The tests were performed under seismic ground motions exhibiting various amplitude levels and frequency contents to develop first and second mode‐dominated responses as well as elastic and inelastic responses. A chirp signal was also used. Coherent results were obtained between the shake table and the RTDS testing techniques, indicating that RTDS testing methods can be used to successfully reproduce both the linear and nonlinear seismic responses of ductile structural steel seismic force resisting systems. The time delay introduced by actuator‐control systems was also studied and a novel adaptive compensation scheme is proposed. Copyright © 2010 John Wiley & Sons, Ltd.     

Diatom-based Holocene paleoenvironmental records from continental sites on northeastern Ellesmere Island, high Arctic, Canada

Stratigraphic changes in diatom assemblages from four small lakes on northeastern Ellesmere Island, high Arctic, Canada, provide a proxy lake-ice cover and paleoenvironmental record. Low absolute diatom abundances and a benthic Fragilaria (sensu lata) dominated assemblage during the postglacial (< 7.6 ka B.P.) to mid-Holocene record the moderating effects of locally retreating glaciers. Around 5.5 ka B.P. diatom concentrations begin to rise, reaching their highest levels (10⁹ valves per g dry sediment) between 4.2 and 3 ka B.P., interpreted to be the warmest period in this region. Topoclimatic differences between lakes on Hazen Plateau and those lower in Lake Hazen Basin account for the initial decline in diatom abundances in the upper lakes after 3 ka B.P. This change is thought to reflect a lowering of the regional snowline, accordant with widely recognized Neoglacial advances on Ellesmere Island and Greenland. Lakes in lower Lake Hazen Basin maintained extensive summer ice free conditions until ~ 1.9 ka B.P., after which diatom abundances declined, suggesting prolonged summer lake-ice cover through the remainder of the recovered Holocene record. Differences between the records presented here and those from coastal areas of the Canadian high Arctic highlight the unique topoclimatic characteristics and continentality of the Lake Hazen region, and possible effects that local marine environments may have had on coastal records. Such differences serve to demonstrate the inherent geographic variability of paleoenvironmental records from the high Arctic.     

Seismic retrofit of low‐rise steel buildings in Canada using rocking steel braced frames

This article examines the use of rocking steel braced frames for the retrofit of existing seismically deficient steel building structures. Rocking is also used to achieve superior seismic performance to reduce repair costs and disruption time after earthquakes. The study focuses on low‐rise buildings for which re‐centring is solely provided by gravity loads rather than added post‐tensioning elements. Friction energy dissipative (ED) devices are used to control drifts. The system is applied to 2‐storey and 3‐storey structures located in 2 seismically active regions of Canada. Firm ground and soft soil conditions are considered. The seismic performance of the retrofit scheme is evaluated using nonlinear dynamic analysis and ASCE 41‐13. For all structures, rocking permits to achieve immediate occupancy performance under 2% in 50 years seismic hazard if the braces and their connections at the building's top storeys are strengthened to resist amplified forces due to higher mode response. Base shears are also increased due to higher modes. Impact at column bases upon rocking induces magnified column forces and vertical response in the gravity system. Friction ED is found more effective for drift control than systems with ring springs or bars yielding in tension. Drifts are sufficiently small to achieve position retention performance for most nonstructural components. Horizontal accelerations are generally lower than predicted from ASCE 41 for regular nonrocking structures. Vertical accelerations in the gravity framing directly connected to the rocking frame are however higher than those predicted for ordinary structures. Vertical ground motions have limited effect on frame response.     

Predation by jellyfish on large and emergent zooplankton: Implications for benthic–pelagic coupling

Stable carbon isotopes were used to determine the contribution of emergent demersal zooplankton to the diet of the scyphozoan jellyfish Catostylus mosaicus at Smiths Lake, New South Wales, Australia. A preliminary study in 2004 indicated that there was no difference in the δ¹³C of ectodermal tissue and mesoglea of the medusae. In 2005, medusae and zooplankton present during the day and night were sampled and isotopic signatures were modelled using IsoSource. Modelling indicated that: (1) mollusc veligers and copepods sampled during the day contributed <13% of the carbon to the jellyfish; (2) copepods sampled at night contributed up to 25%; and (3) the large, emergent decapod Lucifer sp. contributed 88–94%. We hypothesised, therefore, that medusae derive most of their carbon from emergent species of zooplankton. In 2006, sampling done in 2005 was repeated three times over a period of 4 weeks to measure short-term temporal variation in isotopic signatures of medusae and zooplankton, and emergent demersal zooplankton was specifically sampled using emergence traps. Short-term temporal variation in isotopic signatures was observed for some taxa, however, actual variations were small (<1.5‰) and the values of medusae and zooplankton remained consistent relative to each other. IsoSource modelling revealed that mysid shrimp and emergent copepods together contributed 79–100% of the carbon to the jellyfish, and that the maximum possible contribution of daytime copepods and molluscs was only 22%. Jellyfish apparently derive most of their carbon from emergent zooplankton and by capturing small numbers of relatively large taxa, such as Lucifer sp. or mysid shrimp. Small but abundantly captured zooplankton (such as mollusc veligers) contribute only minor amounts of carbon. Jellyfish have a major role in the transfer of carbon between benthic and pelagic food webs in coastal systems.     

A High-Performance,High-Accuracy RTK GPS Machine Guiadance System

As technology matures, Real Time Kinematic (RTK) global positioning system (GPS) receivers are providing increased performance in accuracy, on-the-fly (OTF) initialization times, measurement speed, and latency. Leica's Dozer 2000 machine guidance system combines an MC1000 GPS sensor, graphic intensive guidance software, a digital terrain model, and a digital site plan. Figure 1 shows the operator's view of the system. The end results is a highly accurate, extremely responsive local navigation system. Engineers can easily upload design information onto a touch-screen machine guidance personal computer (PC) and greatly reduce earthmoving costs while simultaneously recording “as-built” inspection data. The Leica MC1000 machine control sensor is a true 10-Hz, centimeter-level-accuracy, open-architecture GPS sensor specifically designed for machine guidance and control. At the heart of the MC1000's performance are a very stable oven-controlled oscillator (3 × 10⁻¹¹/s short-term stability), a low-power Intel 486-DX4-80 processor, and four user-configurable input/output (I7O) ports. Special algorithms mitigate the effects of multipath and Selective Availability (SA) while providing centimeter accuracy up to 10 times per second with only 30 milliseconds' latency. The high update rate and low latency are essential for machine guidance and control. The MC1000 GPS reference station is capable of outputting RTK and Differential GPS (DGPS) data simultaneously, providing and entire site with GPS information for machine guidance and control, tracking and dispatching of vehicles, and support of survey crews. This article describes how recent advances in technology have combined to produce the Leica Dozer 2000 – a machine guidance system that is ideal for a wide range of earthmoving and inspection applications. ? 2000 John Wiley & Sons, Inc.     

Going West: Nutrient Limitation of Primary Production in the Northern Gulf of Mexico and the Importance of the Atchafalaya River

To investigate controls on phytoplankton production along the Louisiana coastal shelf, we mapped salinity, nutrient concentrations (dissolved inorganic nitrogen (DIN) and phosphorus (P_i), silicate (Si)), nutrient ratios (DIN/P_i), alkaline phosphatase activity, chlorophyll and ¹⁴C primary productivity on fine spatial scales during cruises in March, May, and July 2004. Additionally, resource limitation assays were undertaken in a range of salinity and nutrient regimes reflecting gradients typical of this region. Of these, seven showed P_i limitation, five revealed nitrogen (N) limitation, three exhibited light (L) limitation, and one bioassay had no growth. We found the phytoplankton community to shift from being predominately N limited in the early spring (March) to P limited in late spring and summer (May and July). Light limitation of phytoplankton production was recorded in several bioassays in July in water samples collected after peak annual flows from both the Mississippi and Atchafalaya Rivers. We also found that organic phosphorus, as glucose-6-phosphate, alleviated P limitation while phosphono-acetic acid had no effect. Whereas DIN/P_i and DIN/Si ratios in the initial water samples were good predictors of the outcome of phytoplankton production in response to inorganic nutrients, alkaline phosphatase activity was the best predictor when examining organic forms of phosphorus. We measured the rates of integrated primary production (0.33?C7.01 g C m^?2 d^?1), finding the highest rates within the Mississippi River delta and across Atchafalaya Bay at intermediate salinities. The lowest rates were measured along the outer shelf at the highest salinities and lowest nutrient concentrations (<0.1 ??M DIN and Pi). The results of this study indicate that P_i limitation of phytoplankton delays the assimilation of riverine DIN in the summer as the plume spreads across the shelf, pushing primary production over a larger region. Findings from water samples, taken adjacent the Atchafalaya River discharge, highlighted the importance of this riverine system to the overall production along the Louisiana coast.