Enhancement of aquifer vulnerability indexing using the analytic-element method

Indexing methods are used for the evaluation of aquifer vulnerability and establishing guidelines for the protection of ground-water resources. The principle of the indexing method is to rank influences on groundwater to determine overall vulnerability of an aquifer to contamination. The analytic element method (AEM) of ground-water flow modeling is used to enhance indexing methods by rapidly calculating a potentiometric surface based primarily on surface-water features. This potentiometric map is combined with a digital-elevation model to produce a map of water-table depth. This is an improvement over simple water-table interpolation methods. It is physically based, properly representing surface-water features, hydraulic boundaries, and changes in hydraulic conductivity. The AEM software, SPLIT, is used to improve an aquifer vulnerability assessment for a valley-fill aquifer in western New York State. A GIS-based graphical user interface allows automated conversion of hydrography vector data into analytic elements.     

Determination of HBCD, PBDEs and MeO-BDEs in California sea lions (Zalophus californianus) stranded between 1993 and 2003

Blubber samples from male California sea lions (Zalphophus californianus) stranded between 1993 and 2003 were analyzed for 27 polybrominated diphenyl ether (PBDE) congeners, three isomers of hexabromocyclododecane (HBCD) and 14 methoxylated polybrominated diphenyl ether (MeO-BDE) congeners. Total PBDEs ranged from 450 ng/g to 4740 ng/g wet mass and total HBCD ranged from < 0.3 ng/g to 12 ng/g wet mass. The concentration of HBCD increased from 0.7 ng/g to12.0 ng/g wet mass in sea lion blubber between 1993 and 2003. However, no significant temporal trend was observed for any of the other brominated compounds over this 10 year period. Only one of the 14 MeO-BDE congeners was detected in the blubber samples, 6-methoxy-2,2',4,4'-tetrabromodiphenyl ether (6-MeO-BDE 47), and concentrations ranged from < 0.2 ng/g to 12 ng/g wet mass. A bromo-, chloro-heterocyclic compound, 1,1'-dimethyl-tetrabromo-dichloro-2,2'-bipyrrole (DBP-Br4Cl2), previously reported in marine species along the Pacific coast, was also identified in the sea lion blubber. DBP-Br4Cl2 ranged from 44 ng/g wet mass to 660 ng/g wet mass and was present at concentrations rivaling the dominant PBDE congener, BDE 47 (2,2',4,4'-tetrabromodiphenyl ether). Concentrations of DBP-Br4Cl2 were positively correlated with 6-MeO-BDE 47 (r = 0.7; p < 0.05). Both of these compounds have been identified in marine algae and sponges, and studies suggest they are both produced from natural sources. This study demonstrates that brominated compounds from both anthropogenic and biogenic sources can accumulate to similar levels in marine mammals. In addition, HBCD concentrations appear to be increasing in California sea lion populations, whereas PBDE concentrations, between 1993 and 2003, were highly variable.     

The crystal chemistry of lithium and Fe3+ in synthetic orthopyroxene

Lithian ferrian enstatite with Li₂O = 1.39 wt% and Fe₂O₃ 7.54 wt% was synthesised in the (MgO–Li₂O–FeO–SiO₂–H₂O) system at P = 0.3 GPa, T = 1,000°C, fO₂ = +2 Pbca, and a = 18.2113(7), b = 8.8172(3), c = 5.2050(2) Å, V = 835.79(9) Å³. The composition of the orthopyroxene was determined combining EMP, LA-ICP-MS and single-crystal XRD analysis, yielding the unit formula ^M2(Mg_0.59Fe _0.21 ²⁺ Li_0.20) ^M1(Mg_0.74Fe _0.20 ³⁺ Fe _0.06 ²⁺ ) Si₂O₆. Structure refinements done on crystals obtained from synthesis runs with variable Mg-content show that the orthopyroxene is virtually constant in composition and hence in structure, whereas coexisting clinopyroxenes occurring both as individual grains or thin rims around the orthopyroxene crystals have variable amounts of Li, Fe³⁺ and Mg contents. Structure refinement shows that Li is ordered at the M2 site and Fe³⁺ is ordered at the M1 site of the orthopyroxene, whereas Mg (and Fe²⁺) distributes over both octahedral sites. The main geometrical variations observed for Li-rich samples are actually due to the presence of Fe³⁺, which affects significantly the geometry of the M1 site; changes in the geometry of the M2 site due to the lower coordination of Li are likely to affect both the degree and the kinetics of the non-convergent Fe²⁺-Mg ordering process in octahedral sites.     

Reconstruction of past methane availability in an Arctic Alaska wetland indicates climate influenced methane release during the past ~12,000?years

Atmospheric contributions of methane from Arctic wetlands during the Holocene are dynamic and linked to climate oscillations. However, long-term records linking climate variability to methane availability in Arctic wetlands are lacking. We present a multi-proxy ~12,000?year paleoecological reconstruction of intermittent methane availability from a radiocarbon-dated sediment core (LQ-West) taken from a shallow tundra lake (Qalluuraq Lake) in Arctic Alaska. Specifically, stable carbon isotopic values of photosynthetic biomarkers and methane are utilized to estimate the proportional contribution of methane-derived carbon to lake-sediment-preserved benthic (chironomids) and pelagic (cladocerans) components over the last ~12,000?years. These results were compared to temperature, hydrologic, and habitat reconstructions from the same site using chironomid assemblage data, oxygen isotopes of chironomid head capsules, and radiocarbon ages of plant macrofossils. Cladoceran ephippia from ~4,000?cal?year BP sediments have ??¹³C values that range from ~?39 to ?31??, suggesting peak methane carbon assimilation at that time. These low ??¹³C values coincide with an apparent decrease in effective moisture and development of a wetland that included Sphagnum subsecundum. Incorporation of methane-derived carbon by chironomids and cladocerans decreased from ~2,500 to 1,500?cal?year BP, coinciding with a temperature decrease. Live-collected chironomids with a radiocarbon age of 1,640?cal?year BP, and fossil chironomids from 1,500?cal?year BP in the core illustrate that ??old?? carbon has also contributed to the development of the aquatic ecosystem since ~1,500?cal?year BP. The relatively low ??¹³C values of aquatic invertebrates (as low as ?40.5??) provide evidence of methane incorporation by lake invertebrates, and suggest intermittent climate-linked methane release from the lake throughout the Holocene.     

Identification of mid-latitudinal regional and urban temperature variabilities based on regional reanalysis data

The objective of the study is to detect geographical and temporal variations of near surface air temperatures over Minnesota and Wisconsin, USA derived from the North American Regional Reanalysis (NARR) dataset. In addition, the study serves to assess the usefulness of NARR temperature data to analyze regional and local temperature variations. Particular emphasis was placed on the analyses on the temperature-modifying effects of the Great Lakes and large urban environments. We analyzed annual mean, daily maximum and minimum, and January minimum and July maximum temperatures for the period 1979–2006 by using methods such as ordinary kriging, principal component analysis, and the Mann–Kendall test. On a regional scale, we found significant effects of the latitude and the Great Lakes on the spatial variability of the data. Furthermore, we found clearly identifiable effects of large urban areas in the study region (Minneapolis—Saint Paul and Milwaukee), which are more evident in the principal component scores than in the temperature data themselves. While we failed to detect significant July maximum temperature trends, we detected significantly increasing trends in January minimum and mean annual temperature datasets in the eastern part of the region. Overall, the present study has demonstrated the potential of using NARR data for urban climate research.     

Physical modelling of sand injectites

Sand injectites are structures that result from intrusion of fluidized sand into fractures. We have studied them in the Tampen Spur area of the North Sea, and have reproduced them experimentally, by driving compressed air through layers of sand, glass microspheres, and silica powder. The silica powder was cohesive and capable of hydraulic fracturing, whereas the sand and glass microspheres were almost non-cohesive and therefore able to fluidize. The models were dynamically similar to their natural counterparts, for as long as equilibrium was static. When the processes became dynamic, so that inertial forces were significant, the scaling was approximate and the corresponding Reynolds numbers differed. The experimental apparatus was a square box, 1 m × 1 m wide, resting on a grid of fluid diffusers. During the experiments, the fluid pressure increased, until it attained and surpassed the weight of overburden. Flat-lying hydraulic fractures, containing air, formed within cohesive and least permeable layers. Heterogeneities in material properties and layer thicknesses were responsible for localizing fracture networks. When any one network broke through to the surface, rapid flow of air through the fractures fluidized the underlying mobile materials and even depleted some of the layers. Some of the fluidized material extruded at the surface through vents, forming volcanoes and sheets. The remainder lodged at depth, forming sand injectites or laccoliths. Conical sand injectites formed preferentially, where layers had high resistance to bending. Laccoliths formed nearer the surface, where overlying layers had low resistance to bending. The experimental sand injectites were broadly similar to those in the Tampen Spur area of the North Sea, as well as other areas.     

Influence of high-pressure processing on the structure and memory effect of synthetic layered double hydroxides

We investigate the structural evolution of synthetic layered double hydroxides (LDH) samples, processed at room temperature and high-pressure (up to 7.7 GPa) in a toroidal chamber with two pressure-transmitting media, lead and graphite, using X-ray diffraction, thermogravimetry and N₂-adsorption isotherms techniques. The X-ray patterns of compacted samples show a decrease in the peak intensities. For both pressure-transmitting media, our samples revealed a reduction of the basal d-spacing for the (003) plane when processed at 7.7 GPa. The expected high-pressure-induced amorphization was not observed. Surprisingly, we find high-pressure processing to have a strong influence on the memory effect of the LDH, due essentially to the reduction of the surface area and pore closing. Even when immersed in water, our samples did not recover the LDH structure, when either calcined at 450°C and compacted at 7.7 GPa, or calcined at 700°C and immediately compacted at 2.5 and 7.7 GPa.     

Clay minerals from the sedimentary cover from the Northwest Iberian shelf

The Northern Iberian margin is a typical example of a continental margin subjected to seasonal highly energetic regime (waves and tides) and receiving inputs of continental sediments via riverine discharges. The principal goal of this study has been to use clay minerals as indicators of sedimentary dynamics in the open shelf system. The distributions of clay mineral in the top layer of the sedimentary cover are shown to be related to their continental sources, but also reflect the influences of winter storms and longshore currents in determining the pathways of sediment transport.The mineralogical composition of the material issuing from the rivers is very similar to the general mineralogical composition of the fine fractions of the seabed sediments. Those deposits that are directly influenced by riverine discharges have higher contents of kaolinite (>20%), whereas those that are not have higher contents of illite (>80%). The available data indicate no significant quantities of terrigenous particles are being discharged from the Spanish rias. Therefore, we conclude that physical processes are controlling the clay mineral distributions and that, despite contributions from the Minho River, the main source of fine detrital particles to the shelf region is the Douro River discharge. These particles settle on the middle shelf, below the 60 m isobath. During storm events these particles are re-suspended and advected northwards to the Galician shelf or into deeper domains. Thus the distributions of the clays indicate there is a net transport of fine sediments both northwards and off-shelf.     

Sediment cascades and the entangled relationship between human impact and natural dynamics at the pre-pottery Neolithic site of Göbekli Tepe,Anatolia

This study presents a meta-analysis of radiocarbon ages for the environs of Göbekli Tepe – one of the oldest monumental structures worldwide – using cumulative probability functions to diachronically assess phases of geomorphodynamic activity as controlled by natural or anthropogenic drivers. We employ sediment cascades as a heuristic framework to study the complex responses of the geomorphological system to various triggers at local to supra-regional scales. Possible triggers include climatic variability as documented by supra-regional hydroclimatic proxy data, regional demographic trends, and local to regional socioeconomic developments such as the emergence of sedentism or the introduction and dispersal of livestock herding. Our results show that phases of intensified geomorphodynamic activity occurred between ca. 7.4–7.0 and 5.8–3.3 ka BP. These phases roughly coincide with phases of population growth in southern Turkey and climatic variations in Turkey and the Levant. The phase between ca. 5.8–3.3 ka BP also corresponds to the time when organized agriculture and the seeder plough were introduced. Also, the identified phases are in agreement with the general trend of varying geomorphodynamic activity in the Eastern Mediterranean as driven by human impact and climatic change. However, neither the Younger Dryas–Holocene transition nor the development of herding during the Pre-Pottery Neolithic left a clear signature. We demonstrate how the different depositional environments in the studied landscape compartments vary with respect to their spatiotemporal coverage and discuss challenges when trying to understand processes that once shaped landscapes of past societies. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd