A note on wave action conservation in a dissipative current wave motion

We consider steady, slowly varying water waves propagating on a steady current over a gently sloping bed, so-called current depth refraction. All expressions are correct to second order in wave amplitude. Formulating the energy equation for the fluctuating motion in terms of wave action (wave energy divided by intrinsic angular frequency) results in an expression, where the dissipative term is strikingly similar to wave action itself. It is simply the ‘extra’ dissipation (per unit area) caused by the fluctuating motion (i.e. total dissipation minus the effect of current acting on total mean bed shear stress) divided by the intrinsic angular frequency. We call it ‘wave action dissipation’. An inconsistency in Phillips' (1977) book is pointed out. A new formula for the calculation of wave amplitudes along rays is set forth.     

Hydroacoustic Field of a Point Source in an Inhomogeneous Marine Medium Containing a Cylindrical Body Floating on the Surface

We study the problem of determination of the sound field of a point harmonic source in the coastal zone and the influence of a cylindrical body floating above the source on the sound field formed in the marine medium. A numerical-analytic method is proposed for the determination of the velocity potential. According to this method, the unknown coefficients in the general solution of the problem are determined from the corresponding infinite system of linear algebraic equations by the method of reduction. We present results of numerical calculations for a special case of a waveguide whose parameters are typical of the coastal part of the sea and perform the comparative analysis of the data obtained as a result of variation of the indicated parameters.     

Factors influencing the oxidation,reduction, methylation and demethylation of mercury species in coastal waters

The objective of this study was to examine the redox reactions and other transformations of mercury (Hg) species in surface waters, and the factors determining the rates of these reactions. For the redox studies completed at the Chesapeake Biological Laboratory (CBL), two isotopes (¹⁹⁹Hg^II and ²⁰²Hg⁰) were added into different types of filtered water (fresh to seawater) to examine the oxidation and reduction reactions. Further studies of both the redox reactions and methylation/demethylation reactions of Hg were conducted with unfiltered water on board research vessels during cruises in May and July 2005 on the Chesapeake Bay and shelf. While CH₃¹⁹⁹Hg^II was added to allow the examination of demethylation, ²⁰¹Hg^II was used to examine both reduction and methylation, and ²⁰²Hg⁰ was used to examine oxidation. Overall, the results showed that both Hg oxidation and reduction were simultaneously occurring and were photochemically mediated in the waters investigated. In contrast to the previously assumed “unreactive” nature of Hg⁰, the studies found that the magnitude of the rate constant for Hg⁰ oxidation was greater than that for reduction, indicating its importance in estuarine and coastal waters. In addition, both experiments at CBL and on board ship showed that Hg^II reduction was similar in magnitude, suggesting that biotic processes were relatively unimportant. While no measurable methylation occurred during the incubation period during the on board studies, concentration of CH₃¹⁹⁹Hg^II decreased over the time during the experiments. It appeared that the demethylation processes were not dominantly photochemically driven, but could be microbially mediated. Further studies are needed in order to help better understand Hg redox and transformations in natural water systems.     

Invertebrates in the trophic webs of the white sea near-shore ecosystem (using the example of Gryaznaya Inlet)

In the food clods of the mass species of macrobenthos of the Gryaznaya Inlet, nonstructured matter plays a great role. We identify this matter as derivates from plant tissues, which are the products of their external metabolism and degradation, with associated microorganisms. This way, the near-shore community considered is supported by a detrital trophic web. This feature distinguishes it from the similar community of the near-Atlantic waters that is based on a pasture web, at least as far as the bivalve mass species are concerned. The groups of the near-shore species of Gryaznaya Inlet separated by a cluster analysis are identified as consortia, combined by the biogeochemical conditions (edifice factor), which can hardly be analyzed at present.     

The dynamics of wave induced ship motions in shallow water

The analytical method developed by Svendsen (1968) for a forced heave motion is extended to the general problem of wave induced heave, roll and sway motions of a long ship at a depth of water which is only slightly larger than the draught of the ship. This corresponds, for example, to the situation of a fully loaded ship in a harbour area.After linearization of the problem, the water motion is considered for each of the three individual motions and for the wave reflection-transmission problem for a fixed ship. The ensuing results for the forces on the ship are then synthesized to form the equations of motion, which are presented with all coefficients given, including mooring forces.Analytical and numerical results are given for the three components of motion, for the associated resonance frequencies, and for the hydrodynamic masses and moments of inertia. Finally, the assumptions used are analyzed and evaluated by comparison with measurements and with other results for a special case.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---