Glacial meltwater cooling of the Gulf of Mexico: GCM implications for Holocene and present-day climates

An atmospheric general circulation model, the NCAR CCM, has been used to investigate the possible effects that reduced Gulf of Mexico sea surface temperatures (SST) could have on regional and hemispheric climates. ¹⁸O records and terrestrial evidence indicate at least two major glacial meltwater discharges into the Gulf of Mexico subsequent to the last glacial maximum. It is probable that these discharges reduced Gulf of Mexico SST. We have conducted three numerical experiments, with imposed gulf-wide SST coolings of 3°C, 6°C, and 12°C, and find in all three experiments significant reductions in the North Atlantic storm-track intensity, along with a strong decrease in transient eddy water vapor transport out of the Gulf of Mexico. Surface pressures are higher over the North Atlantic, indicating a reduction of the climatological Icelandic low. The region is generally cooler and drier, with a reduction in precipitation that agrees well with evidence from Greenland ice cores. Other statistically significant changes occur across the Northern Hemisphere, but vary between the three experiments. In particular, warmer, wetter conditions are found over Europe for both the 6°C and 12°C SST reductions, but cooler conditions are found for the 3°C reduction. This indicates a dependence, in both the sign and magnitude of the model response, on the magnitude of the imposed SST anomaly. The results suggest that the present-day North Atlantic storm track is dependent on warm Gulf of Mexico SST for much of its intensity. They also suggest that meltwater-induced coolings may help account, in part, for some of the climatic oscillations that occurred during the last glacial/interglacial transition.     

CLEAN: project overview on CO2 large-scale enhanced gas recovery in the Altmark natural gas field (Germany)

The joint research project CLEAN was conducted in the years 2008?C2011 by a German research and development (R&D) alliance of 16 partners from science and industry. The project was set-up as pilot project to investigate the processes relevant to enhanced gas recovery (EGR) by the injection of CO₂ into a subfield of the almost depleted Altmark natural gas field. Despite the setback that permission for active injection was not issued by the mining authority during the period of the project, important results fostering the understanding of processes linked with EGR were achieved. Work carried out led to a comprehensive evaluation of the EGR potential of the Altmark field and the Altensalzwedel subfield in particular. The calculated safety margins emphasize that technical well integrity of the 12 examined boreholes is given for EGR without a need for any further intervention. The laboratory and field tests confirm that the Altensalzwedel subfield is suitable for the injection of 100,000?t of CO₂. Numerical simulations provide sound predictions for the efficiency and safety of the EGR technology based on the CO₂ injection. The development and testing of different monitoring techniques facilitate an improved surveying of CO₂ storage sites in general. The CLEAN results provide the technological, logistic and conceptual prerequisites for implementing a CO₂-based EGR project in the Altmark and provide a benchmark for similar projects in the world.     

Falling sphere observations of anisotropic gravity wave motions in the upper stratosphere over Australia

A study of inertial scale gravity wave motions in the region of the atmosphere between 30 and 60 km has been undertaken, using wind and temperature data derived from rocket-borne falling sphere density experiments performed over Woomera, Australia between 1962 nad 1976. The gross features of the wave field compare favorably with those found in similar northern hemispheric studies. Wave propagation is found to be both vertically and horizontally anisotropic. A rotary spectral analysis indicates predominately upgoing wave energy, suggesting that the majority of sources of these waves lie below 30 km. A detailed statistical investigation of the waves, made using the Stokes parameters technique, reveals that phase progression is also highly directional in the horizontal, with a significant zonal component in summer, but with a strong meridional component in winter. Propagation towards the southeast is inferred in summer, with the waves possibly emanating from tropospheric sources in equatorial regions to the north of Australia. The technique also shows that, on average, the waves appear to have mean ellipse eccentricities (=f/) around 0.4–0.45. Indirect estimates of a number of important wave parameters are made. In particular,v andw flux estimates are made over several height intervals. The vertical gradient of density weighted flux implies wave-induced mean flow accelerations of the order 0.1–1 ms^–1day^–1. This suggests that dissipating gravity waves are a significant source of the momentum residuals that are encountered in studies of satellite data from this region.     

Submarine hydrothermal activity and gold-rich mineralization at Brothers Volcano, Kermadec Arc, New Zealand

Brothers volcano, of the Kermadec intraoceanic arc, is host to a hydrothermal system unique among seafloor hydrothermal systems known anywhere in the world. It has two distinct vent fields, known as the NW Caldera and Cone sites, whose geology, permeability, vent fluid compositions, mineralogy, and ore-forming conditions are in stark contrast to each other. The NW Caldera site strikes for ??600?m in a SW?CNE direction with chimneys occurring over a ??145-m depth interval, between ??1,690 and 1,545?m. At least 100 dead and active sulfide chimney spires occur in this field and are typically 2?C3?m in height, with some reaching 6?C7?m. Their ages (at time of sampling) fall broadly into three groups: <4, 23, and 35?years old. The chimneys typically occur near the base of individual fault-controlled benches on the caldera wall, striking in lines orthogonal to the slopes. Rarer are massive sulfide crusts 2?C3?m thick. Two main types of chimney predominate: Cu-rich (up to 28.5?wt.% Cu) and, more commonly, Zn-rich (up to 43.8?wt.% Zn). Geochemical results show that Mo, Bi, Co, Se, Sn, and Au (up to 91?ppm) are correlated with the Cu mineralization, whereas Cd, Hg, Sb, Ag, and As are associated with the dominant Zn-rich mineralization. The Cone site comprises the Upper Cone site atop the summit of the recent (main) dacite cone and the Lower Cone site that straddles the summit of an older, smaller, more degraded dacite cone on the NE flank of the main cone. Huge volumes of diffuse venting are seen at the Lower Cone site, in contrast to venting at both the Upper Cone and NW Caldera sites. Individual vents are marked by low-relief (??0.5?m) mounds comprising predominately native sulfur with bacterial mats. Vent fluids of the NW Caldera field are focused, hot (??300°C), acidic (pH????2.8), metal-rich, and gas-poor. Calculated end-member fluids from NW Caldera vents indicate that phase separation has occurred, with Cl values ranging from 93% to 137% of seawater values. By contrast, vent fluids at the Cone site are diffuse, noticeably cooler (??122°C), more acidic (pH?1.9), metal-poor, and gas-rich. Higher-than-seawater values of SO₄ and Mg in the Cone vent fluids show that these ions are being added to the hydrothermal fluid and are not being depleted via normal water/rock interactions. Iron oxide crusts 3?years in age cover the main cone summit and appear to have formed from Fe-rich brines. Evidence for magmatic contributions to the hydrothermal system at Brothers includes: high concentrations of dissolved CO₂ (e.g., 206?mM/kg at the Cone site); high CO₂/³He; negative ??D and ??¹⁸O_H2O for vent fluids; negative ??³⁴S for sulfides (to ?4.6??), sulfur (to ?10.2??), and ??¹⁵N₂ (to ?3.5??); vent fluid pH values to 1.9; and mineral assemblages common to high-sulfidation systems. Changing physicochemical conditions at the Brothers hydrothermal system, and especially the Cone site, occur over periods of months to hundreds of years, as shown by interlayered Cu?+?Au- and Zn-rich zones in chimneys, variable fluid and isotopic compositions, similar shifts in ³He/⁴He values for both Cone and NW Caldera sites, and overprinting of ??magmatic?? mineral assemblages by water/rock-dominated assemblages. Metals, especially Cu and possibly Au, may be entering the hydrothermal system via the dissolution of metal-rich glasses. They are then transported rapidly up into the system via magmatic volatiles utilizing vertical (??2.5?km long), narrow (??300-m diameter) ??pipes,?? consistent with evidence of vent fluids forming at relatively shallow depths. The NW Caldera and Cone sites are considered to represent stages along a continuum between water/rock- and magmatic/hydrothermal-dominated end-members.     

Controls on surface water chemistry in two lake‐watersheds in the Adirondack region of New York: differences in nitrogen solute sources and sinks

The southwestern Adirondack region of New York receives among the highest rates of atmospheric nitrogen (N) deposition in the USA. Atmospheric N deposition to sensitive ecosystems, like the Adirondacks, may increase the acidification of soils through losses of exchangeable nutrient cations, and the acidification of surface waters associated with enhanced mobility of nitrate (NO₃^?). However, watershed attributes, including surficial terrestrial characteristics, in‐lake processing, and geological settings, have been found to complicate the relationships between atmospheric N deposition and N drainage losses. We studied two lake‐watersheds in the southwestern Adirondacks, Grass Pond and Constable Pond, which are located in close proximity (～26 km) and receive similarly high N deposition, but have contrasting watershed attributes (e.g. wetland area, geological settings). Since the difference in the influence of N deposition was minimal, we were able to examine both within‐ and between‐watershed influences of land cover, the contribution of glacial till groundwater inputs, and in‐lake processes on surface water chemistry with particular emphasis on N solutes and dissolved organic carbon (DOC). Monthly samples at seven inlets and one outlet of each lake were collected from May to October in 1999 and 2000. The concentrations of NO₃^? were high at the Grass Pond inlets, especially at two inlets, and NO₃^? was the major N solute at the Grass Pond inlets. The concentrations of likely weathering products (i.e. dissolved Si, Ca²⁺, Mg²⁺, Na⁺) as well as acid neutralizing capacity and pH values, were also particularly high at those two Grass Pond inlets, suggesting a large contribution of groundwater inputs. Dissolved organic N (DON) was the major N solute at the Constable Pond inlets. The higher concentrations of DON and DOC at the Constable Pond inlets were attributed to a large wetland area in the watershed. The DOC/DON ratios were also higher at the Constable Pond inlets, possibly due to a larger proportion of coniferous forest area. Although DON and DOC were strongly related, the stronger relationship of the proportion of wetland area with DOC suggests that additional factors regulate DON. The aggregated representation of watershed physical features (i.e. elevation, watershed area, mean topographic index, hypsometric‐analysis index) was not clearly related to the lake N and DOC chemistry. Despite distinctive differences in inlet N chemistry, NO₃^? and DON concentrations at the outlets of the two lakes were similar. The lower DOC/DON ratios at the lake outlets and at the inlets having upstream ponds suggest the importance of N processing and organic N sources within the lakes. Although an inverse relationship between NO₃^? and DOC/DON has been suggested to be indicative of a N deposition gradient, the existence of this relationship for sites that receive similar atmospheric N deposition suggest that the relationship between NO₃^? and the DOC/DON ratio is derived from environmental and physical factors. Our results suggest that, despite similar wet N deposition at the two watershed sites, N solutes entering lakes were strongly affected by hydrology associated with groundwater contribution and the presence of wetlands, whereas N solutes leaving lakes were strongly influenced by in‐lake processing. Copyright © 2006 John Wiley & Sons, Ltd.     

Observations of the evolution of the aerosol, cloud and boundary‐layer characteristics during the 1st ACE‐2 Lagrangian experiment

During the 1st Lagrangian experiment of the North Atlantic Regional Aerosol Characterisation Experiment (ACE‐2), a parcel of air was tagged by releasing a smart, constant level balloon into it from the Research Vessel Vodyanitskiy . The Meteorological Research Flight's C‐130 aircraft then followed this parcel over a period of 30 h characterising the marine boundary layer (MBL), the cloud and the physical and chemical aerosol evolution. The air mass had originated over the northern North Atlantic and thus was clean and had low aerosol concentrations. At the beginning of the experiment the MBL was over 1500 m deep and made up of a surface mixed layer (SML) underlying a layer containing cloud beneath a subsidence inversion. Subsidence in the free troposphere caused the depth of the MBL to almost halve during the experiment and, after 26 h, the MBL became well mixed throughout its whole depth. Salt particle mass in the MBL increased as the surface wind speed increased from 8 m s⁻¹ to 16 m s⁻¹ and the accumulation mode (0.1μm to 3.0 μm) aerosol concentrations quadrupled from 50 cm⁻³ to 200 cm⁻³. However, at the same time the total condensation nuclei (>3 nm) decreased from over 1000 cm⁻³ to 750 cm⁻³. The changes in the accumulation mode aerosol concentrations had a significant effect on the observed cloud microphysics. Observational evidence suggests that the important processes in controlling the Aitken mode concentration which, dominated the total CN concentration, included, scavenging of interstitial aerosol by cloud droplets, enhanced coagulation of Aitken mode aerosol and accumulation mode aerosol due to the increased sea salt aerosol surface area, and dilution of the MBL by free tropospheric air.     

Uniform Permian 40Ar/39Ar detrital mica ages in the eastern Qaidam Basin (NW China): where is the source?

New single‐grain ⁴⁰Ar/³⁹Ar detrital white‐mica ages from the Lulehe section at the eastern Qaidam Basin yield uniform Permian ages between 250 ± 3 and 279 ± 3 Ma throughout the whole Cenozoic sequence. This is inconsistent with the present hinterland, which is composed of early Palaeozoic metamorphic units with subordinate early Palaeozoic and few Permian granites. The new data indicate that Permian tectonic units are likely more widespread at the north‐eastern margin of the Tibetan plateau as known at present, particularly within the Qilian Mountains. The preferred explanation is that the Qaidam block represents a rigid indenter, which indented during late Tertiary times into early Palaeozoic orogenic units. This is consistent with recent findings of a NW‐trending sinistral Permian ductile shear zone and a dextral, NW‐trending Tertiary fault system close to the north‐eastern margin of the Qaidam Basin.     

Determination of asperity damage parameters for constitutive models of rock discontinuities

Dilatancy and contact surface damage are important phenomena affecting the behaviour of rock joints and other geological discontinuities. Effective constitutive laws that incorporate these behaviours have recently been developed but require the specification of new material parameters that govern damage of asperity surfaces. Determination of the parameters that control damage is currently a difficulty that confronts practitioners. This brief will summarize the findings of Hutson and Dowding's investigation of joint surface asperity degradation and elaborate on the implications for application.