川西地区台阵环境噪声瑞利波相速度层析成像

2006年中国地震局地质研究所地震动力学国家重点实验室在川西地区(26°N~32°N,100°E~105°E)布设了由297台宽频带数字地震仪组成的流动观测台阵.利用该密集台阵29°N以北156个台站2007年1~12月份的地震环境噪声记录和互相关技术,我们得到了所有台站对的面波经验格林函数和瑞利波相速度频散曲线,并进一步反演得到了观测台阵下方2~35 s周期的瑞利波相速度分布图像．本文结果表明,观测台阵覆盖的川滇地块、松潘-甘孜地块和四川盆地的地壳速度结构存在显著差异,具体表现为：(1)短周期（2~8 s）相速度分布与地表构造特征相吻合,作为川滇地块、松潘-甘孜地块和四川盆地之间的边界断裂,龙门山断裂带和鲜水河断裂带对上述三个地块上地壳的速度结构具有明显的控制作用,四川盆地前陆低速特征表明相应区域存在较厚的（约10 km）沉积盖层;(2)中周期（12~18 s）相速度分布表明,川滇地块和松潘-甘孜地块中上地壳速度结构存在明显的不均匀横向变化,并形成了尺度不同且高、低速相间的分块结构,而四川盆地中地壳整体上已经表现出相对高速;(3)长周期（25~35 s）相速度分布表明,松潘-甘孜地块,特别是川滇地块中下地壳表现为广泛的明显低速异常,意味着它们的中下地壳相对软弱,而四川盆地的中下地壳呈现整体性的相对高速,意味着四川盆地具有相对坚硬的中下地壳,并且以汶川地震的震中为界,龙门山断裂带的地壳结构显示了北段为高速异常,南段为低速异常的分段特征．     

临界转换的早期预警信号

从生态系统到金融市场和气候在内的很多复杂动力系统,都会有临界点,在这样的点上系统可能会发生突变,从而演变到一个对立的动力模式上。在这样的临界点到达之前对其进行预测极为困难,但是现在,不同科学领域的研究工作表明,普遍性的早期预警信号有迹可循。对一系列不同类型的系统来说,这些信号会指示是否正在趋近一个临界阈值。     

Weighted sum method for calculating ground force: an evaluation by using a portable vibrator system

Using a lightweight portable vibrator, we have evaluated the accuracy of the 'weighted sum' method for calculating ground force. Experiments in which the vibrator was suspended elastically have shown that, contrary to expectations based on standard theory, the amplitude of the weighted sum ground force was significantly above zero at high frequencies (> 500 Hz). Complementary investigations with load cells confirmed these results. If not accounted for, these deviations may introduce significant 'vibroseis-correlation noise' in processed records. Furthermore, we have demonstrated that ground force and base-plate velocity can be used to estimate the radiation impedance, which describes the interaction of (vibratory) sources with the ground. Using the mechanical characteristics of the system (i.e. maximum displacement, maximum velocity and maximum acceleration of the base-plate) and the radiation impedance, the behaviour of the portable vibrator on typical Dutch soil types was evaluated. We found that for the same sweep, more high-frequency energy could be generated on hard grounds (e.g. concrete) characterized by a higher radiation impedance than on softer grounds (e.g. clay or sand). Knowledge of this behaviour may provide important information for use in data interpretation.     

Modelling aeolian sand transport and morphological development in two beach nourishment areas

The aeolian sand transport model SAFE and the air flow model HILL were applied to evaluate cross‐shore changes at two nourished beaches and adjacent dunes and to identify the response of aeolian sand transport and morphology to several nourishment design parameters and fill characteristics. The main input of the model consisted of data on the sediment, tide and meteorological conditions, and of half‐yearly measured characteristics of topography, vegetation and sand fences. The cross‐shore profiles generated by SAFE–HILL were compared to measured cross‐shore profiles. The patterns of erosion and deposition, and the morphological development corresponded. In general, the rates of aeolian sand transport were overestimated. The impact of parameters that are related to beach nourishment (namely grain size, adaptation length and beach topography) on profile development was evaluated. Grain size affected the aeolian sand transport rate to the foredunes, and therefore the morphology. Adaptation length, which is a measure of the distance over which sediment transport adapts to a new equilibrium condition, affected the topography of the beach in particular. The topography of a beach nourishment had limited impact on both aeolian sand transport rate and morphology. Copyright © 2000 John Wiley & Sons, Ltd.     

Characterization of Estuarine and Fluvial Dissolved Organic Matter by Thermochemolysis using Tetramethylammonium Hydroxide

Selected samples of dissolved organic matter (DOM) isolated by ultrafiltration (UDOM) have been analyzed by thermochemolysis in the presence of tetramethylammonium hydroxide (TMAH). This technique cleaves ester and ether bonds of bio‐ and geological macromolecules and releases monomer subunits and methylates them in situ as their methyl ethers and methyl esters. Compared with conventional pyrolysis, TMAH thermochemolysis avoids decarboxylation of preexisting carboxylic moieties and produces aromatic acids as their methyl esters. Various phenolic derivatives, which might originate from incorporated lignin‐derived structures, from the highly aliphatic and resistant biopolymer cutan and also from proteinaceous materials, were identified among the products produced from UDOM upon thermochemolysis. The presence of lignin derivatives in UDOM indicates input of organic matter derived from terrestrial sources. Various aromatic acids, perhaps representing the final steps in the oxidation of the side‐chain during microbial oxidation of lignin, were released upon TMAH thermochemolysis, suggesting they are structural constituents of the UDOM. Different ratios of lignin‐derived materials, commonly determined using the CuO oxidation method, such as the Δ value, indicative of the amount of lignin present, the acid/aldehyde ratio (Ad/Al)_G, indicative of the extent of oxidative degradation of the lignin component, and the syringyl/guaiacyl (S/G) and p‐hydroxyphenyl/guaiacyl (P/G) ratios, indicative of the contribution for the different types of lignin, were determined.     

Temporal and spatial variability of cross-fault groundwater-level differences: the impact of fault-induced permeability reduction,precipitation and evapotranspiration

Hydrogeology Journal - Faults in the Roer Valley Rift System (Netherlands, Belgium, and Germany) act as barriers to lateral groundwater flow in unconsolidated sedimentary aquifers. This causes a...     

The influence of particle composition on thorium scavenging in the NE Atlantic ocean (POMME experiment)

²³⁰Th, ²³²Th and ²³⁴Th were analyzed in sinking particles collected by moored and drifting sediment traps in the NE Atlantic Ocean (POMME experiment) in order to constrain the phase(s) carrying Th isotopes in the water column. It reveals a contrasted behaviour between ²³⁴Th and ²³⁰Th. ²³⁴Th is correlated to the particulate organic carbon suggesting that it is primarily scavenged by organic compounds in the surface waters. ²³⁰Th_xs is correlated with Mn, Ba and the lithogenic fraction that are enriched in small suspended particles and incorporated in the sinking particulate flux throughout the water column. The lack of correlation between ²³⁰Th_xs and CaCO₃ or biogenic silica (bSi) indicates that CaCO₃ and bSi are not responsible for ²³⁰Th scavenging in the deep waters of this oceanic region. ²³⁰Th is generally correlated with the lithogenic content of the trapped material but this correlation disappears in winter during strong atmospheric dust inputs suggesting that lithogenic matter is not directly responsible for ²³⁰Th scavenging in the deep waters or that sufficient time is required to achieve particle–solution equilibration. MnO₂ could be the prevalent ²³⁰Th_xs-bearing phase. The narrow range of K_{d_MnO2}^Th obtained for very contrasted oceanic environments supports a global control of ²³⁰Th_xs scavenging by MnO₂ and raises the possibility that the ²³⁰Th–²³¹Pa fractionation is controlled by the amount of colloidal MnO₂ in seawater.     

Micromorphological Analysis of Coastal Sediments from Willapa Bay, Washington, USA: A Technique for Analysing Inferred Tsunami Deposits

Tsunami deposits are provisionally distinguished in the field on the basis of anomalous sand horizons, fining-up and fining-landward, coupled with organic-rich, fragmented `backwash' sediments. In this paper, micromorphological features of a sediment sequence previously interpreted as being of tsunami origin are described. These characteristics are shown to be consistent with the macro-scale features used elsewhere, but show additional details not seen in standard stratigraphies, including possible evidence for individual waves, possibly wave-magnitude progression, organic fragment alignment and intraclast microstructures. Although replication and more complete studies are needed, this analysis confirms the identification of a tsunami in Willapa Bay in ca.1700 AD, while demonstrating a widely applicable technique for confirming or refuting possible tsunami deposits.     

A record of accelerated erosion in the recent sediments of Blelham Tarn in the English Lake district

Two frozen cores from Blelham Tarn were subsampled and measured using mineral magnetic, loss-on-ignition (LOI), radiometric, granulometric and diatom analyses. A detailed chronology was established using varves, radioisotopes and diatoms. This has enabled an accurately dated reconstruction of sedimentation over the past forty years. Despite a large increase in lake productivity, evidence suggests that the observed exponential increase in sedimentation rates can be attributed to erosion within the catchment. The predominant sediment source has been identified as surface soil. A comparison between the trend of accelerated sedimentation and the record of increased sheep stocking density for the area within which the most of the catchment lies, as well as observations of contemporary surface processes within the catchment, both suggest that much of the recent erosion is a direct response to increased pressure from sheep grazing.     

Internal variability in a regional climate model over West Africa

Sensitivity studies with regional climate models are often performed on the basis of a few simulations for which the difference is analysed and the statistical significance is often taken for granted. In this study we present some simple measures of the confidence limits for these types of experiments by analysing the internal variability of a regional climate model run over West Africa. Two 1-year long simulations, differing only in their initial conditions, are compared. The difference between the two runs gives a measure of the internal variability of the model and an indication of which timescales are reliable for analysis. The results are analysed for a range of timescales and spatial scales, and quantitative measures of the confidence limits for regional model simulations are diagnosed for a selection of study areas for rainfall, low level temperature and wind. As the averaging period or spatial scale is increased, the signal due to internal variability gets smaller and confidence in the simulations increases. This occurs more rapidly for variations in precipitation, which appear essentially random, than for dynamical variables, which show some organisation on larger scales.