Habitat evaluation for sarus crane in the Keoladeo National Park using IRS LISS III and pan merged data and GIS

The Keoladeo National Park, Bharatpur, a man-made fresh water wetland carved out of a natural depression on the floodplain of two minor tributaries of the Yamuna-Gambhir and the Banganga is the country’s finest waterfowl habitat. This important wetland was set aside as a bird sanctuary in 1956 and it was elevated to the status of a National Park in 1981. It was also designated a Ramsar site- a wetland of international importance under the Ramsar convention. This important wetland has distinction of being the only Indian wetland to be included under both the Ramsar and the World Heritage convention. The attempt has been made to evaluate the habitat of Sarus crane in the Keoladeo National Park using satellite data — IRS LISS III and PAN merged product and GIS. Geocoded data of IRS —1C LISS III of 21 March 1999 on 1: 50,000 scale and PAN data of March 17, 1999 were used to generate the vegetation cover type map and open water. The maps showing drainage, human habitations, contours, roads, etc. were prepared using the Survey of India topographical sheets and contour map of park area. Information regarding habitat parameters was collected from the existing literature and field observations. The Sarus crane mainly fed in the wetland on the rhizome ofNymphaea sp.,Scirpus tuberosus andEleocharis plantaginea. As there were changes in their habitat requirements at different seasons, the sighting of Sarus crane in each habitat were recorded along with the time and activity during observation. The most utilized habitat for the entire period of study was moderately wet grassland followed by pools. The pools were used mainly during the summer. The water depth requirement observed was between 30–40 cm and 20–40 cm. The suitability maps for Sarus crane were then generated using all remote sensing based and conventional information using rule based equations in the GIS within the Keoladeo National Park.     

Check dam positioning by prioritization of micro-watersheds using SYI model and morphometric analysis — Remote sensing and GIS perspective

Sediment Yield Index (SYI) model and results of morphometric analysis have been used to prioritize watersheds and to locate sites for checkdam positioning in Tarafeni watershed in Midnapur district. West Bengal. Various thematic maps such as land use/land cover, slope, drainage, soil etc. were prepared from 1RS ID LISS III digital data, SOI toposheets of 1:50,000 scale and other reference maps. Morphometric parameters such as bifurcation ratio (R_b). drainage density (D_d), texture ratio (T), length of overland flow (L_o), stream frequency (F_u), compactness coefficient (C_c), circularity ratio (R_c), elongation ratio (E_r), shape factor (B_s) and form factor (R_f) were computed. Automated demarcation of prioritization of micro-watersheds was done by using GIS overlaying technique by assigning weight factors to all the identified features in each thematic map and ranks were assigned to the morphometric parameters. Five categories of priority viz., very high, high, medium, low and very low, were given to all the watersheds in both the methods. Sixty-two micro-watersheds using SYI method and twenty-three micro-watersheds using morphometric have been prioritized as very high priority. Final priority map was prepared by considering the commonly occurred very high-prioritized micro-watersheds in both SYI model and morphometric analysis. Twenty-four suitable sites were identified for check dam construction in 21 highly prioritized watersheds. It is proved that integrated study of SYI model and morphometric analysis yield good result in prioritization of watersheds.     

A 500 hPa synoptic wildland fire climatology for large Canadian forest fires, 1959–1996

Summary In Canada, the average annual area of burned forest has increased from around 1 million ha in the 1970’s to over 2.5 million ha in the 1990’s. A previous study has identified the link between anomalous mid-tropospheric circulation at 500 hPa over northern North America and wildland fire severity activity in various large regions of Canada over the entire May to August fire season. In this study, a northern North American study region of the hemispheric gridded 5° latitude by 10° longitude 500 hPa dataset is identified and analysed from 1959 to 1996 for a sequence of six monthly periods through the fire season, beginning in April and ending in September. Synoptic types, or modes of upper air behavior, are determined objectively by the eigenvector method employing K-means cluster analysis. Monthly burned areas from the Canadian Large Fire Database (LFDB) for the same period, 1959 to 1996, are analysed in conjunction with the classified monthly 500 hPa synoptic types. Relationships between common monthly patterns of anomalous upper flow and spatial patterns of large fire occurrence are examined at the ecozone level. Average occurrence of a monthly synoptic type associated with very large area burned is approximately 18% of the years from 1959 to 1996. The largest areas burned during the main fire (May to August) season occur in the western Boreal and Taiga ecozones – the Taiga Plains, Taiga Shield, Boreal West Shield and Boreal Plains. Monthly burned areas are also analysed temporally in conjunction with a calculated monthly zonal index (Zi_m) for two separate areas defined to cover western and eastern Canada. In both western and eastern Canada, high area burned is associated with synoptic types with mid-tropospheric ridging in the proximity of the affected region and low Zi_m with weak westerlies and strong meridional flow over western Canada. Received April 3, 2001 Revised July 13, 2001     

Observations Of Nocturnal Drainage Flow In A Shallow Gully

The formation of cold air drainage flows in a shallow gully is studied during CASES-99 (Cooperative Atmosphere-Surface Exchange Study). Fast and slow response wind and temperature measurements were obtained on an instrumented 10-m tower located in the gully and from a network of thermistors and two-dimensional sonic anemometers, situated across the gully. Gully flow formed on clear nights even with significant synoptic flow. Large variations in surface temperature developed within an hour after sunset and in situ cooling was the dominant factor in wind sheltered locations. The depth of the drainage flow and the height of the down-gully wind speed maximum were found to be largest when the external wind speed above the gully flow is less than 2 m s^-1. The shallow drainage current is restricted to a depth of a few metres, and is deepest when the stratification is stronger and the external flow is weaker. During the night the drainage flow breaks down, sometimes on several occasions, due to intermittent turbulence and downward fluxes of heat and momentum. The near surface temperature may increase by 6 ° C in less than 30 min due to the vertical convergence of downward heat flux. The mixing events are related to acceleration of the flow above the gully flow and decreased Richardson number. These warming events also lead to warming of the near surface soil and reduction of the upward soil heat flux. To examine the relative importance of different physical mechanisms that could contribute to the rapid warming, and to characterize the turbulence generated during the intermittent turbulent periods, the sensible heat budget is analyzed and the behaviour of different turbulent parameters is discussed.     

Air–sea interaction over the Indian Ocean due to variations in the Indonesian throughflow

The effects of the Indonesian throughflow on the upper thermocline circulation and surface heat flux over the Indian Ocean are presented for a 3-D ocean model forced by two different monthly wind-stress climatologies, as they show interesting differences, which could have implications for long-term variability in the Indian and Australasian monsoons. The effects are determined by contrasting a control run with a run in which the throughflow is blocked by an artificial land-bridge across the exit channels into the Indian Ocean. In the model forced by ECMWF wind stresses, there is little impact on the annual mean surface heat flux in the region surrounding the throughflow exit straits, whereas in the model forced by SSM/I-based wind stresses, a modest throughflow of less than 5 ᎒⁶ m³s^-1 over the upper 300 m induces an extra 10-50 Wm^-2 output. In the SSM/I-forced model, there is insignificant penetration of the throughflow into the northern Indian Ocean. However, in the ECMWF-forced model, the throughflow induces a 5-10 Wm^-2 reduction in heat input into the ocean, i.e., an effective output, over the Somali Current in the annual mean. These differences are attributed to differences in the strength and direction of the Ekman transport of the ambient flow, and the vertical structure of the transport and temperature anomalies associated with the throughflow. In both models, the throughflow induces a 5-30 Wm^-2 increase in net output over a broad swathe of the southern Indian Ocean, and a reduction in heat output of 10-60 Wm^-2 in a large L-shaped band around Tasmania. Effective increases in throughflow-induced net output reach up to 40 (60) Wm^-2 over the Agulhas Current retroflection in the ECMWF (SSM/I)-forced model. Seasonal variations in the throughflow's effect on the net surface heat flux are attributed to seasonal variations in the ambient circulation of the Indian Ocean, specifically in coastal upwelling along the south Javan, west Australian, and Somalian coasts, and in the depth of convective overturning between 40°S to 50°S, and its sensing of the mean throughflow's thermal anomaly. The seasonal anomalies plus annual mean yield maximum values for the throughflow-induced net surface heat output in boreal summer. Values may exceed 40 Wm^-2 in the southern Indian Ocean interior in both models, exceed 60 Wm^-2 over the Agulhas retroflection and immediate vicinity of the exit channels in the SSM/I-forced model, and reach 30 Wm^-2 over the Somali jet in the ECMWF-forced model.     

Determination of Area-Averaged Water Vapour Fluxes with Large Aperture and Radio Wave Scintillometers over a Heterogeneous Surface – Flevoland Field Experiment

A large aperture scintillometer (LAS) andradio wave scintillometer (RWS)were installed over a heterogeneous areato test the applicability of the scintillation method.The heterogeneity in the area, whichconsisted of many plots, was mainly caused bydifferences in thermal properties ofthe crops; the variations in theaerodynamic roughness lengthwere small. The water vapour fluxesderived from the combined LAS-RWSsystem, also known as the two-wavelengthmethod, agreed fairly well with the aggregatedwater vapour fluxes derived from in-situeddy covariance measurements. The water vapourfluxes derived from a stand-alone LASare also presented. It was found that a single LASand an estimate of the area averagedavailable energy (using a simple parameterisationscheme) can provide also reasonablearea-averaged water vapour fluxes.