Modelling of local velocity anomalies: a cookbook

The determination of small-scale velocity anomalies (from tens to a few hundreds of metres) is a major problem in seismic exploration. The impact of such anomalies on a structural interpretation can be dramatic and conventional techniques such as tomographic inversion or migration velocity analysis are powerless to resolve the ambiguity between structural and velocity origins of anomalies. We propose an alternative approach based on stochastic modelling of numerous anomalies until a set of models is found which can explain the real data. This technique attempts to include as much a priori geological information as possible. It aims at providing the interpreter with a set of velocity anomalies which could possibly be responsible for the structural response. The interpreter can then choose one or several preferred models and pursue a more sophisticated analysis. The class of retained models are all equivalent in terms of data and therefore represent the uncertainty in the model space. The procedure emulates the real processing sequence using a simplified scheme. Essentially, the technique consists of five steps: 1 Interpretation of a structural anomaly in terms of a velocity anomaly with its possible variations in terms of position, size and amplitude. 2 Drawing a model by choosing the parameters of the anomaly within the acceptable range. 3 Modelling the traveltimes in this model and producing the imaging of the reflected interface. 4 Comparing the synthetic data with the real data and keeping the model if it lies within the data uncertainty range. 5 Iterate from step 2. In order to avoid the high computational cost inherent in using statistical determinations, simplistic assumptions have been made: ? The anomaly is embedded in a homogeneous medium: we assume that the refraction and the time shift due to the anomaly have a first-order effect compared with ray bending in the intermediate layers. ? We model only the zero-offset rays and therefore we restrict ourselves to structural problems. ? We simulate time migration and so address only models of limited structural complexity. These approximations are justified in a synthetic model which includes strong lateral velocity variations, by comparing the result of a full processing sequence (prestack modelling, stack and depth migration) with the simplified processing. This model is then used in a blind test on the inversion scheme.     

Estimation of the effect of protective piers on wind wave parameters in the Sevastopol Bay

An effectiveness of the storm wave attenuation by protective piers in the Sevastopol Bay of the Black Sea is studied on the basis of numerical simulation using the SWAN spectral model. Analyzed are the parameters of waves generated by winds of four main directions as well as by the southern cyclone during the storm on November 11, 2007. It is obtained that waves from the northwest part of the Black Sea penetrate most intensively into the Sevastopol Bay in case of western wind and, to a lesser degree, in case of northern and southern winds. A protective effect of the piers is observed in the west part of the bay only and the wave attenuation near the southern coast is more significant than near the northern one. The area of the southern coast directly behind the southern pier is completely protected from the storm waves and, as moving away from the pier, the danger of intensive wave effect on the coast is kept.     

The biogeochemical sulfur cycle in the marine boundary layer over the Northeast Pacific Ocean

The major components of the marine boundary layer biogeochemical sulfur cycle were measured simultaneously onshore and off the coast of Washington State, U.S.A. during May 1987. Seawater dimethylsulfide (DMS) concentrations on the continental shelf were strongly influenced by coastal upwelling. Concentration further offshore were typical of summer values (2.2 nmol/L) at this latitude. Although seawater DMS concentrations were high on the biologically productive continental shelf (2–12 nmol/L), this region had no measurable effect on atmospheric DMS concentrations. Atmospheric DMS concentrations (0.1–12 nmol/m³), however, were extremely dependent upon wind speed and boundary layer height. Although there appeared to be an appreciable input of non-sea-salt sulfate to the marine boundary layer from the free troposphere, the local flux of DMS from the ocean to the atmosphere was sufficient to balance the remainder of the sulfur budget.     

Observational estimation of heat budgets on drifting ice and open water over the Arctic Ocean

It is of major scientific interests to determine the parameters of momentum, heat and vapor exchange in the planetary boundary layer in order to study the effects of ocean-ice-atmosphere interactions and their feedback mechanisms on global climate[1]. Lin…     

Intraplate deformation and 3D rheological structure of the Rhine Rift System and adjacent areas of the northern Alpine foreland

The lithosphere of the Northern Alpine foreland has undergone a polyphase evolution during which interacting stress-induced intraplate deformation and upper mantle thermal perturbations controlled folding of the thermally weakened lithosphere. In this paper we address relationships among deeper lithospheric processes, neotectonics and surface processes in the Northern Alpine foreland with special emphasis on tectonically induced topography. We focus on lithosphere memory and neotectonics, paying special attention to the thermo-mechanical structure of the Rhine Graben System and adjacent areas of the northern Alpine foreland lithosphere. We discuss implications for mechanisms of large-scale intraplate deformation and links with surface processes and topography evolution.     

Inverse Analysis of Deep Excavation Using Differential Evolution Algorithm

This paper presents the applications of the differential evolution (DE) algorithm in back analysis of soil parameters for deep excavation problems. A computer code, named Python‐based DE, is developed and incorporated into the commercial finite element software ABAQUS, with a parallel computing technique to run an FE analysis for all trail vectors of one generation in DE in multiple cores of a cluster, which dramatically reduces the computational time. A synthetic case and a well‐instrumented real case, that is, the Taipei National Enterprise Center (TNEC) project, are used to demonstrate the capability of the proposed back‐analysis procedure. Results show that multiple soil parameters are well identified by back analysis using a DE optimization algorithm for highly nonlinear problems. For the synthetic excavation case, the back‐analyzed parameters are basically identical to the input parameters that are used to generate synthetic response of wall deflection. For the TNEC case with a total of nine parameters to be back analyzed, the relative errors of wall deflection for the last three stages are 2.2, 1.1, and 1.0%, respectively. Robustness of the back‐estimated parameters is further illustrated by a forward prediction. The wall deflection in the subsequent stages can be satisfactorily predicted using the back‐analyzed soil parameters at early stages. Copyright © 2014 John Wiley & Sons, Ltd.     

Coupled changes in sand grain size and sand transport driven by changes in the upstream supply of sand in the Colorado River: Relative importance of changes in bed-sand grain size and bed-sand area

Sand transport in the Colorado River in Marble and Grand canyons was naturally limited by the upstream supply of sand. Prior to the 1963 closure of Glen Canyon Dam, the river exhibited the following four effects of sand supply limitation: (1) hysteresis in sediment concentration, (2) hysteresis in sediment grain size coupled to the hysteresis in sediment concentration, (3) production of inversely graded flood deposits, and (4) development or modification of a lag between the time of a flood peak and the time of either maximum or minimum (depending on reach geometry) bed elevation. Construction and operation of the dam has enhanced the degree to which the first two of these four effects are evident, and has not affected the degree to which the last two effects of sand supply limitation are evident in the Colorado River in Marble and Grand canyons. The first three of the effects involve coupled changes in suspended-sand concentration and grain size that are controlled by changes in the upstream supply of sand. During tributary floods, sand on the bed of the Colorado River fines; this causes the suspended sand to fine and the suspended-sand concentration to increase, even when the discharge of water remains constant. Subsequently, the bed is winnowed of finer sand, the suspended sand coarsens, and the suspended-sand concentration decreases independently of discharge. Also associated with these changes in sand supply are changes in the fraction of the bed that is covered by sand. Thus, suspended-sand concentration in the Colorado River is likely regulated by both changes in the bed-sand grain size and changes in the bed-sand area. A physically based flow and suspended-sediment transport model is developed, tested, and applied to data from the Colorado River to evaluate the relative importance of changes in the bed-sand grain size and changes in the bed-sand area in regulating suspended-sand concentration. Although the model was developed using approximations for steady, uniform flow, and other simplifications that are not met in the Colorado River, the results nevertheless support the idea that changes in bed-sand grain size are much more important than changes in bed-sand area in regulating the concentration of suspended sand.     

Homology of solar flare-associated radio events

The concept of homology, introduced by Ellison, Mc Kenna, and Rceid (1960) for optical flares, can be extended to flare-associated radio events. Successive flares within the same centre of activity sometimes produce radio events that are remarkably similar. The similarity amounts to the fact that they extend over about the same range(s) in frequency, producing at each frequency responses of comparable intensity and duration. On some occasions the intensity curves at individual frequencies show even detailed resemblance. The occurrence of homologous radio events is commonly restricted to periods of less than 48 hours.Without being homologous, radio events that occur in the same centre of activity may present a common characteristic that is typical for that centre. Two such characteristics are (1) the production of radio responses at centimetric, decimetric and metric frequencies, and (2) the impulsiveness of microwave outbursts. The distribution of time intervals during which such bursts occur is compared with the same distribution for homologous events (Figure 3).     

Riometer observations in the polar caps of solar cosmic ray events during the IQSY

During the period of the IQSY, January 1964 through December 1965, the sun remained quiet, accelerating few energetic particles. There were many instances during the IQSY when lowenergy detectors on satellites and space probes registered small intensity increases. However, few of these events were associated with protons of energies exceeding 10 MeV. Moreover, the maximum intensities (E _p > 500 keV) were typically 1–8/cm²sec ster. Most of these events were below the threshold of riometer detection.The largest solar cosmic ray event observed in 1964 by polar-based riometers was that of March 16. This event was observed by 30 and 50 Mc/s riometers at McMurdo Sound, Antarctica, and Shepherd Bay, N.W.T., Canada.The largest event in 1965 occurred on February 5 and was the largest during the IQSY. It was associated with a class 2 flare at about 1750 UT, February 5. The propagation time between the sun and Earth was about one hour. This event was well observed by satellites, space probes, and riometers.This paper discusses primarily the 5 February 1965 event. Some discussion is also given to the 16 March 1964 event, other small events during the IQSY, and the recent event in March 1966.     

Regional Problems in Water Use in Siberian Industrial Agglomerations

Water Resources - The basic indicators of regional water use have been identified and assessed as a component of a single social–natural–technogenic system. These indicators have been...