An analysis of soil crust strength in relation to potential abrasion by saltating particles

Wind erosion depends on the ease with which particles can be detached from the soil surface, but suitable tests to characterize this property are not available. Two possible methods to determine surface soil strength in the field were therefore compared on a range of artificially ‘crusted’ surfaces. These were made by spraying or tension wetting aggregates (10–2, 2–0.5 and <0.5 mm) from a structurally unstable sandy loam, followed by drying. Each test involved measuring the force exerted on a probe driven at a steady rate into the surface, using either a flat-tipped 0.6 mm diameter penetrometer or a flat-ended cylindrical punch with inner and outer diameters of 5 and 6 mm, respectively. Both probes showed that crusts could be produced reproducibly. Depending on the probe and aggregate size, penetration mainly occurred either as a result of aggregates being deflected out of the pathway of the probe or by genuine rupture of aggregates or of the crusted surface. The penetrometer, because it was comparable to the size of sand grains, gave results that can be used to characterize surface erodibility to saltating particles. The punch gave results that would be unsuitable for this purpose, as would other strength tests that are on too large a scale. Penetrometer results were analyzed to calculate the energy required for penetration. It was thus possible to demonstrate that only the spray-wetted fine aggregates had a surface that could undergo large-scale rupture by saltating sand grains. For all other surfaces, saltating particles would be unable to supply sufficient energy to rupture aggregates or the crusted surface. Erosion could only occur by a slower process of abrasion in which smaller particles or aggregates are chipped away from the surface. However, it is shown that saltating particles could rupture the interaggregate bonding in the 2–0.5 mm aggregate surfaces, thus permitting creep. An alternative and potentially simpler way of characterizing surface erodibility by using a surface modulus of elasticity is also discussed. Our results demonstrate that the small diameter penetrometer is a promising technique for characterizing erodibility of aggregated and crusted surfaces. © 1997 by John Wiley & Sons, Ltd.     

A GIS-based multi-proxy analysis of the evolution of subglacial dynamics of the Quebec–Labrador ice dome,northeastern Quebec,Canada

The glacial records of the inner-core regions of the Laurentide Ice Sheet (LIS) document complex yet coherent patterns reflecting ice-sheet change (e.g. ice-divide migration), providing unique insights into past glacial conditions. This study develops a conceptual model of subglacial dynamics evolution within a major ice-dispersal centre of the LIS in northeastern Quebec, Canada using a GIS-based analysis of the surficial geologic record. Multiple proxies of subglacial conditions (subglacial streamlined landforms, lake density and lake area over thin drift/bedrock) were analysed through grid-overlay techniques and then classified based on different proxy variables ranging from highly mobile warm-based to immobile cold-based conditions. An additional proxy (till blanket) was used to identify areas of thick till deposition, but with few proxies (few lake or landform metrics). Based on local ice-flow reconstructions, the most ‘relict’ glacial terrain zone (GTZ1) has warm-based conditions over 66% of its area and is remarkably well preserved, suggesting laterally extensive warm-based conditions during the oldest identified ice-flow phase. This relict glacial terrain is partially overprinted by two subsequent ice-flow phases in spatially restricted zones in the northeast (73% warm-based), east-central (41% warm-based), and northwest (33% warm-based) of the study area. A zone of more sluggish conditions (only 3% warm-based) was identified in the highlands at the centre of the study area, characterized by thin till cover, few landforms, yet with large patches of relatively abundant small lakes, indicative of areal scouring. No clear evidence of sustained cold-based conditions (i.e. high chemical index of alteration values or high ¹⁰Be abundances) was found in the study area. These results suggest that warm-based conditions (active erosion and/or deposition) were uniformly widespread during the earliest ice-flow phase, later becoming more spatially restricted with broader sluggish ice conditions. These spatially restricted regions of warm-based subglacial regimes were likely controlled by surrounding and down-flow ice streaming. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Grain size along two gravel-bed rivers: statistical variation,spatial pattern and sedimentary links

A new set of field data facilitates a detailed analysis of variations in bed material grain size within two confluent gravel-bed rivers in northeastern British Columbia, Canada. A preliminary assessment of grain-size variability establishes a basis for examination of the spatial pattern of grain-size change. Standard ANOVA techniques are inappropriate because individual samples have unequal variances and are not normally distributed. Alternative tests for homoscedasticity and comparison of means are therefore utilized. Within-site, between-sample variability is not significant. The grain-size distributions that were obtained at individual sites are therefore representative of the depositional environments that were sampled. In both rivers mean grain size does vary significantly between sites and there is therefore a basis for examining the data for spatial patterns such as downstream fining. Textural variations along the two rivers studied here are complex and show negligible overall fining (in over 100 km). This is the consequence of a large number of tributary inputs and non-alluvial sediment sources which are the legacy of Late Pleistocene glaciation. The identification of lateral sources like these is fundamental for understanding textural changes within rivers. The sedimentary link (a channel reach between significant lateral sediment inputs) provides a means of isolating fluvial maturation processes (abrasion and sorting) from contingent lateral inputs. Strong fining trends are apparent in most links and classification of grain-size measurements according to their location within particular links greatly improves the statistical explanation of textural variation. Identification of sedimentary links provides a means of applying models of fluvial fining processes, so isolation of link networks will aid the development of basin-scale models of textural variation. © 1998 John Wiley & Sons, Ltd.     

An Analysis Platform for Multiscale Hydrogeologic Modeling with Emphasis on Hybrid Multiscale Methods

One of the most significant challenges faced by hydrogeologic modelers is the disparity between the spatial and temporal scales at which fundamental flow, transport, and reaction processes can best be understood and quantified (e.g., microscopic to pore scales and seconds to days) and at which practical model predictions are needed (e.g., plume to aquifer scales and years to centuries). While the multiscale nature of hydrogeologic problems is widely recognized, technological limitations in computation and characterization restrict most practical modeling efforts to fairly coarse representations of heterogeneous properties and processes. For some modern problems, the necessary level of simplification is such that model parameters may lose physical meaning and model predictive ability is questionable for any conditions other than those to which the model was calibrated. Recently, there has been broad interest across a wide range of scientific and engineering disciplines in simulation approaches that more rigorously account for the multiscale nature of systems of interest. In this article, we review a number of such approaches and propose a classification scheme for defining different types of multiscale simulation methods and those classes of problems to which they are most applicable. Our classification scheme is presented in terms of a flowchart (Multiscale Analysis Platform), and defines several different motifs of multiscale simulation. Within each motif, the member methods are reviewed and example applications are discussed. We focus attention on hybrid multiscale methods, in which two or more models with different physics described at fundamentally different scales are directly coupled within a single simulation. Very recently these methods have begun to be applied to groundwater flow and transport simulations, and we discuss these applications in the context of our classification scheme. As computational and characterization capabilities continue to improve, we envision that hybrid multiscale modeling will become more common and also a viable alternative to conventional single‐scale models in the near future.     

Sensitivity of interfacial hydraulics to the microtopographic roughness of water‐lain gravels

Flow within the interfacial layer of gravel‐bed rivers is poorly understood, but this zone is important because the hydraulics here transport sediment, generate flow structures and interact with benthic organisms. We hypothesized that different gravel‐bed microtopographies generate measurable differences in hydraulic characteristics within the interfacial layer. This was tested using a high density of spatially and vertically distributed, velocity time series measured in the interfacial layers above three surfaces of contrasting microtopography. These surfaces had natural water‐worked textures, captured in the field using a casting procedure. Analysis was repeated for three discharges, with Reynolds numbers between 165000 and 287000, to evaluate whether discharge affected the impact of microtopography on interfacial flows. Relative submergence varied over a small range (3.5 to 8.1) characteristic of upland gravel‐bed rivers. Between‐surface differences in the median and variance of several time‐averaged and turbulent flow parameters were tested using non‐parametric statistics. Across all discharges, microtopographic differences did not affect spatially averaged (median) values of streamwise velocity, but were associated with significant differences in its spatial variance, and did affect spatially averaged (median) turbulent kinetic energy. Sweep and ejection events dominated the interfacial region above all surfaces at all flows, but there was a microtopographic effect, with Q2 and Q4 events less dominant and structures less persistent above the surface with the widest relief distribution, especially at the highest Reynolds number flow. Results are broadly consistent with earlier work, although this analysis is unique because of the focus on interfacial hydraulics, spatially averaged ‘patch scale’ metrics and a statistical approach to data analysis. An important implication is that observable differences in microtopography do not necessarily produce differences in interfacial hydraulics. An important observation is that appropriate roughness parameterizations for gravel‐bed rivers remain elusive, partly because the relative contributions to flow resistance of different aspects of bed microtopography are poorly constrained. © 2014 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Public Targets,Private Choices: Urban Climate Governance in the Pacific Northwest

A survey of local governments participating in two urban climate change programs is presented to determine the mechanisms used to reach emissions reduction goals and the motivations for participation. Results support previous research that shows a preference for policies that rely on changes in individual behavior, while also providing new insights into how mitigation responsibilities are distributed among the public and private sector and the relative importance of scientific consensus, economic incentives, and federal inaction on local government justification for climate-related policies. The article concludes with a discussion of urban climate governance as part of a wider system of neoliberal climate governance.     

Policy relevance of biogeographic classification for conservation and management of marine biodiversity beyond national jurisdiction, and the GOODS biogeographic classification

This article 1) examines the policy context that created a demand for biogeographic information, 2) describes early national and regional experiences in applying biogeographic classifications, 3) extracts lessons about their usefulness, 4) introduces a broad-scale biogeographic classification for the open ocean and deep seabed called the Global Open Ocean and Deep Seabed (GOODS) biogeographic classification and explains its relevance in this policy context. In so doing it highlights potential uses of biogeographic classifications for the open ocean and deep seabed: these include ecosystem-based management approaches, marine spatial planning and identification of representative networks of MPAs. It also discusses approaches for dealing with problems of uncertainty and connectivity. The article concludes with recommendations for the further development of the GOODS and finer-scale biogeographic classifications.     

Form and growth of bars in a wandering gravel‐bed river

The changing form of developing alluvial river bars has rarely been studied in the field, especially in the context of the fixed, compound, mainly alternate gravel bars that are the major morphological feature of the wandering style. Century scale patterns of three‐dimensional growth and development, and the consequent scaling relations of such bars, are examined along the gravel‐bed reach of lower Fraser River, British Columbia, Canada. A retrospective view based on maps and aerial photographs obtained through the twentieth century shows that individual bars have a life history of about 100 years, except in certain, protected positions. A newly formed gravel bar quickly assumes its ultimate thickness and relatively quickly approaches its equilibrium length. Growth continues mainly by lateral accretion of unit bars, consistent with the lateral style of instability of the river. Bar growth is therefore allometric. Mature bars approach equilibrium dimensions and volume that scale with the overall size of the channel. Accordingly, the bars conform with several published criteria for the ultimate dimensions of alternate barforms. Sand bars, observed farther downstream, have notably different morphology. Fraser River presents a typical wandering channel planform, exhibiting elements of both meandered and low‐order braided channels. Hydraulic criteria to which the Fraser bars conform illustrate why this planform develops and persists. The modest rate of bed material transfer along the channel – typical of the wandering type – determines a century‐length time scale for bar development. This time scale is consistent with estimates that have been made for change of the macroform elements that determine the overall geometry of alluvial channels. Copyright © 2009 John Wiley & Sons, Ltd.