Multispectral remote sensing of biomass burning in West Africa

Remote sensing measurements provide a vauable means of determining the extent of burning areas and of estimating the overall distribution of pollutant sources (identified from experimental studies) in time and space. This distribution has to be taken into account in the boundary conditions of chemistry atmospheric models.Recent methods developed for the remote sensing of active fires in tropical or temperated forest zones, have been found to be completely inadequate for fire detection on West African savannas. In order to accurately estimate the active fire distribution in the function of different sorts of West African savannas (Sahelian, Sudanian and Guinean) and forests, a multispectral methodology has been developed based on NOAA/11-AVHRR satellite data, with the purpose of eliminating as much as possible the problems related to large surface heterogeneity, confusion and bias, produced by clouds, smoke, haze, background emissivities, etc.Unlike other methods, the results show that the multispectral method, in spite of its selectivity, provides realistic results, and does not under- or over-estimate the number of fires that can be sensed by the satellite. Consequently, this methodology is more appropriate than the simplest ones for a systematic sensing of this phenomenon.     

Seismic analysis of multiply supported secondary systems with dynamic interaction effects

For a proper response spectrum analysis of a secondary system with multiple supports, the seismic inputs are required to be defined in terms of the auto and cross floor response spectra. If no feed-back or interaction effect from the secondary system to its supporting primary structure is suspected, these inputs can be developed by a direct analysis of the supporting structure alone. However, sometimes the effect of the interaction on the secondary system response can be quite significant. Herein, a method is developed to incorporate the feed-back effect, through proper modification of the interaction-free floor spectrum inputs. The interaction coefficients are used to effect such modifications in different floor spectral quantities. A procedure for the calculation of the interaction coefficients is proposed. The modified floor spectra when used as inputs to the secondary system do introduce the interaction effect in the secondary system response. A successful application of this method is demonstrated by numerical examples of secondary systems with three different secondary-to-primary system mass ratios.     

Morphology of the Itapeva to Tramandai transgressive dunefield barrier system and mid‐ to late Holocene sea level change

The surface morphology of the transgressive dunefield barrier extending from Itapeva to Tramandai along the northern littoral of Rio Grande do Sul, is examined and an attempt is presented to link morphological changes across the barrier to Holocene sea level changes. The 4·5 km wide Holocene barrier displays two typical morphologies: an inner part dominated by large‐scale, continuous alongshore, overlapping dunefield phases comprising sand sheets, dunes, deflation plains and precipitation ridges; and an outer part dominated by discontinuous, medium‐ to small‐scale, triangular to lobate transgressive dunefield phases, cut by both active and relict (palaeo‐) creeks or washouts. Holocene sea level in the region rose to c. +1 to +3 m above present reaching a maximum around 5100 years bp and then progressively fell to the present level. We argue that the effect on barrier development was to suppress the development of a drainage system during the rising and maximum stages, and encourage the development of an organized drainage system in the form of regularly spaced washouts during the falling period, and that this change in sea level from rising to falling therefore produced the large‐scale differences in barrier morphology. Copyright © 2006 John Wiley & Sons, Ltd.     

Acceleration response modification factors for nonstructural components attached to inelastic moment‐resisting frame structures

A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on a variety of stiff and flexible inelastic regular moment‐resisting frame structures with periods from 0.3 to 3.0 s exposed to 40 far‐field ground motions is presented. Peak component acceleration (PCA) demands were quantified based on the floor response spectrum (FRS) method without considering dynamic interaction effects. This study evaluated the main factors that influence the amplification or decrease of FRS values caused by inelasticity in the primary structure in three distinct spectral regions namely long‐period, fundamental‐period, and short‐period region. The amplification or decrease of peak elastic acceleration demands depends on the location of the NSC in the supporting structure, periods of the component and building, damping ratio of the component, and level of inelasticity of the supporting structure. While FRS values at the initial modal periods of the supporting structure are reduced due to inelastic action in the primary structure, the region between the modal periods experiences an increase in PCA demands. A parameter denoted as acceleration response modification factor (R_acc) was proposed to quantify this reduction/increase in PCA demands. Copyright © 2007 John Wiley & Sons, Ltd.     

Fine sediment transport and accumulations at the mouth of the Seine estuary (France)

A comprehensive study of fine sediment transport in the macrotidal Seine estuary has been conducted, including observations of suspended particulate matter (SPM), surficial sediment, and bathymetric data, as well as use of a three dimensional mathematical model. Tide, river regime, wind, and wave forcings are accounted. The simulated turbidity maximum (TM) is described in terms of concentration and location according to tidal amplitude and the discharge of the Seine River. The TM is mainly generated by tidal pumping, but can be concentrated or stretched by the salinity front. The computed deposition patterns depend on the TM location and are seasonally dependent. The agreement with observations is reasonable, although resuspension by waves may be overestimated. Although wave resuspension is likely to increase the TM mass, it generally occurs simultaneously with westerly winds that induce a transverse circulation at the mouth of the estuary and then disperse the suspended material. The resulting effect is an output of material related to wind and wave events, more than to high river discharge. The mass of the computed TM remains stable over 6 months and independent of the river regime, depending mainly on the spring tide amplitude. Computed fluxes at different cross-sections of the lower estuary show the shift to the TM according to the river flow and point out the rapidity of the TM adjustment to any change of river discharge. The time for renewing the TM by riverine particles has been estimated to be one year.     

A methodology to estimate renewal time scales in estuaries: the Tagus Estuary case

High-resolution hydrodynamic models are a common tool to simulate water dynamics in estuaries. Results from these models are, however, difficult to interpret without the aid of additional parameters to integrate the information. In this paper a methodology to understand the transport patterns in the Tagus Estuary is proposed. It is based on the computation of two renewal time scales: residence time and integrated water fraction. This last parameter is used to build a dependency matrix that gives the integrated influence of each region of the estuary at a selected point. The parameters are computed using a Lagrangian transport model coupled to the hydrodynamic model. Results show that Tagus Estuary has two different types of regions: the central part of the estuary, with low renewal efficiency, and three regions with higher renewal efficiency. Renewal mechanisms are, however, different for each region as shown by the dependency matrix. Comparison of renewal time scales with results from a water-quality model revealed that residence time is not a limiting parameter for primary production in the Tagus Estuary.Responsible Editor: Hans Burchard     

A six-step practical approach to semivariogram modeling

Geostatistical prediction and simulation are being increasingly used in the earth sciences and engineering to address the imperfect knowledge of attributes that fluctuate over large areas or volumes—pollutant concentration, electromagnetic fields, porosity, thickness of a geological formation. Central to the application of such techniques is the need to know the spatial continuity, knowledge that is commonly condensed in the form of covariance or semivariogram models. Their preparation is subdivided here into the following steps: (1) Data editing, (2) Exploratory data analysis, (3) Semivariogram estimation, (4) Directional investigation, (5) Simple modeling, (6) Nested modeling. I illustrate these stages practically with a real data set from a geophysical survey from Elk County, Kansas, USA. The applicability of the approach is not limited by the physical nature of the attribute of interest.     

Preservation of large titanosaur sauropods in overbank fluvial facies: A case study in the Cretaceous of Argentina

Patagonia exhibits a particularly abundant record of Cretaceous dinosaurs with worldwide relevance. Although paleontological studies are relatively numerous, few include taphonomic information about these faunas. This contribution provides the first detailed sedimentological and taphonomical analyses of a dinosaur bone quarry from northern Neuquén Basin. At Arroyo Seco (Mendoza Province, Argentina), a large parautochthonous/autochthonous accumulation of articulated and disarticulated bones that represent several sauropod individuals has been discovered. The fossil remains, assigned to Mendozasaurus neguyelap González Riga, correspond to a large (18–27-m long) sauropod titanosaur collected in the strata of the Río Neuquén Subgroup (late Turoronian–late Coniacian). A taphonomic viewpoint recognizes a two-fold division into biostratinomic and fossil-diagenetic processes. Biostratinomic processes include (1) subaerial biodegradation of sauropod carcasses on well-drained floodplains, (2) partial or total skeletal disarticulation, (3) reorientation of bones by sporadic overbank flows, and (4) subaerial weathering. Fossil-diagenetic processes include (1) plastic deformation of bones, (2) initial permineralization with hematite, (3) fracturing and brittle deformation due to lithostatic pressure; (4) secondary permineralization with calcite in vascular canals and fractures, and (5) postfossilization bone weathering. This type of bone concentration, also present in Rincón de los Sauces (northern Patagonia), suggests that overbank facies tended to accumulate large titanosaur bones. This taphonomic mode, referred to as “overbank bone assemblages”, outlines the potential of crevasse splay facies as important sources of paleontological data in Cretaceous meandering fluvial systems.     

Ordovician igneous and metamorphic units in southeastern Puna: New U–Pb and Sm–Nd data and implications for the evolution of northwestern Argentina

New field, petrological, geochemical, and geochronological data (U–Pb and Sm–Nd) for Ordovician rock units in the southeastern Puna, NW Argentina, indicate two lithostratigraphic units at the eastern–northeastern border of salar Centenario: (1) a bimodal volcanosedimentary sequence affected by low- to medium-grade metamorphism, comprising metasediments associated with basic and felsic metavolcanic rocks, dated 485 ± 5 Ma, and (2) a plutonic unit composed of syenogranites to quartz-rich leucogranites with U–Pb zircon ages between 462 ± 7 and 475 ± 5 Ma. Felsic metavolcanic and plutonic rocks are peraluminous and show similar geochemical differentiation trends. They also have similar Sm–Nd isotopic compositions (T_DM model ages of 1.54–1.78 Ga; ε_Nd(T) values ranging from −3.2 to −7.5) that suggest a common origin and derivation of the original magmas from older (Meso-Paleoproterozoic?) continental crust. Mafic rocks show ε_Nd(T) ranging from +2.3 to +2.5, indicating a depleted mantle source. The data presented here, combined with those in the literature, suggest Ordovician magmatism mainly recycles preexisting crust with minor additions of juvenile mantle-derived material.     

Singularity and Nonnormality in the Classification of Compositional Data

Geologists may want to classify compositional data and express the classification as a map. Regionalized classification is a tool that can be used for this purpose, but it incorporates discriminant analysis, which requires the computation and inversion of a covariance matrix. Covariance matrices of compositional data always will be singular (noninvertible) because of the unit-sum constraint. Fortunately, discriminant analyses can be calculated using a pseudo-inverse of the singular covariance matrix; this is done automatically by some statistical packages such as SAS. Granulometric data from the Darss Sill region of the Baltic Sea is used to explore how the pseudo-inversion procedure influences discriminant analysis results, comparing the algorithm used by SAS to the more conventional Moore–Penrose algorithm. Logratio transforms have been recommended to overcome problems associated with analysis of compositional data, including singularity. A regionalized classification of the Darss Sill data after logratio transformation is different only slightly from one based on raw granulometric data, suggesting that closure problems do not influence severely regionalized classification of compositional data.