The structure of the lower crust at the Argentine continental margin, South Atlantic at 44°S

It is well established that the Argentine passive margin is of the rifted volcanic margin type. This classification is based primarily on the presence of a buried volcanic wedge beneath the continental slope, manifested by seismic data as a seaward dipping reflector sequence (SDRS). Here, we investigate the deep structure of the Argentine volcanic margin at 44°S over 200 km from the shelf to the deep oceanic Argentine Basin. We use wide-angle reflection/refraction seismic data to perform a joint travel time inversion for refracted and reflected travel times. The resulting P-wave velocity-depth model confirms the typical volcanic margin structure. An underplated body is resolved as distinctive high seismic velocity (v_p up to 7.5 km/s) feature in the lower crust in the prolongation of a seaward dipping reflector sequence. A remarkable result is that a second, isolated body of high seismic velocity (v_p up to 7.3 km/s) exists landward of the first high-velocity feature. The centres of both bodies are 60 km apart. The high-velocity lower-crustal bodies likely were emplaced during transient magmatic–volcanic events accompanying the late rifting and initial drifting stages. The lateral variability of the lower crust may be an expression of a multiple rifting process in the sense that the South Atlantic rift evolved by instantaneous breakup of longer continental margin segments. These segments are confined by transfer zones that acted as rift propagation barriers. A lower-crustal reflector was detected at 3 to 5 km above the modern Moho and probably represents the lower boundary of stretched continental crust. With this finding we suggest that the continent–ocean boundary is situated 70 km more seaward than in previous interpretations.     

Evidence of episodic long-lived eruptions in the Yuma,Ginsburg, Jesús Baraza and Tasyo mud volcanoes,Gulf of Cádiz

High-resolution single channel and multichannel seismic reflection profiles and multibeam bathymetric and backscatter data collected during several cruises over the period 1999 to 2007 have enabled characterising not only the seabed morphology but also the subsurface structural elements of the Yuma, Ginsburg, Jesús Baraza and Tasyo mud volcanoes (MVs) in the Gulf of Cádiz at 1,050–1,250 m water depth. These MVs vary strongly in morphology and size. The data reveal elongated cone-shaped edifices, rimmed depressions, and scarps interpreted as flank failures developed by collapse, faulting, compaction and gravitational processes. MV architecture is characterised by both extrusive and intrusive complexes, comprising stacked edifices (including seabed cones and up to four buried bicones) underlain by chaotic vertical zones and downward-tapering cones suggesting feeder systems. These intrusive structures represent the upper layer of the feeder system linking the fluid mud sources with the constructional edifices. The overall architecture is interpreted to be the result of successive events of mud extrusion and outbuilding alternating with periods of dormancy. Each mud extrusion phase is connected with the development of an edifice, represented by a seabed cone or a buried bicone. In all four MVs, the stacked edifices and the intrusive complexes penetrate Late Miocene–Quaternary units and are rooted in the Gulf of Cádiz wedge emplaced during the late Tortonian. Major phases of mud extrusion and outbuilding took place since the Late Pliocene, even though in the Yuma and Jesús Baraza MVs mud volcanism started in the Late Miocene shortly after the emplacement of the Gulf of Cádiz wedge. This study shows that fluid venting in the eastern sector of the Gulf of Cádiz promoted the outbuilding of large long-lived mud volcanoes active since the Late Miocene, and which have been reactivated repeatedly until recent times.     

Free and open source software for geospatial applications (FOSS4G) to support Future Earth

ABSTRACT

The development, integration, and distribution of the information and spatial data infrastructure (i.e. Digital Earth; DE) necessary to support the vision and goals of Future Earth (FE) will occur in a distributed fashion, in very diverse technological, institutional, socio-cultural, and economic contexts around the world. This complex context and ambitious goals require bringing to bear not only the best minds, but also the best science and technologies available. Free and Open Source Software for Geospatial Applications (FOSS4G) offers mature, capable and reliable software to contribute to the creation of this infrastructure. In this paper we point to a selected set of some of the most mature and reliable FOSS4G solutions that can be used to develop the functionality required as part of DE and FE. We provide examples of large-scale, sophisticated, mission-critical applications of each software to illustrate their power and capabilities in systems where they perform roles or functionality similar to the ones they could perform as part of DE and FE. We provide information and resources to assist the readers in carrying out their own assessments to select the best FOSS4G solutions for their particular contexts and system development needs.     

Oxygen-carbon dioxide-nutrients relationships in the Southeastern Region of the Bering Sea

The vertical distribution of density, salinity, temperature, dissolved oxygen, apparent oxygen utilization, nutrients, preformed phosphate, pH, alkalinity, alkalinity: chlorinity ratio, in situ partial pressure of carbon dioxide, and percent saturation of calcite and aragonite, for the Southeastern Bering Sea, is studied and explained in terms of biological and physical processes. Some hydrological interactions between the Bering Sea and the North Pacific Ocean are explained. The horizontal distribution of dissolved oxygen at 2000 and 2500 m depths, throughout the Bering Sea, indicates that deep water is flowing from the Pacific, through the Kamchatka Strait, and then northward and eastward in the Bering Sea. Based on the dissolved oxygen distribution we estimate roughly that it takes 20 years for the deep waters to move from the Kamchatka Strait to the Southeastern part of the eastern basin. The surface concentration of nutrients is higher in the Bering Sea than in the North Pacific Ocean, probably because of upwelling and intense vertical mixing in the Bering Sea. A multivariable regression analysis of dissolved oxygen as a function of phosphate concentration and potential temperature was applied for the region where the potential temperature-salinity diagram is straight, and the confidence interval of the PO₄ coefficient, at the 95% probability level, was found consistent with theRedfield biochemical oxidation model. The calcium carbonate saturation calculations show that the Bering Sea is supersaturated with aragonite in the upper 100 m, and with calcite in the upper 200 m. Below these depths seawater is undersaturated with respect to these two minerals.     

Upwelling off the coast of Peru

Geographical distributions of upwelling centers off the coast of Peru are studied on the basis of monthly mean wind data during 17 years from 1939 through 1955. Three remarkable upwelling centers are found near 5°S, 11°S and 15°S, from the analyses. With regard to the negative surface divergence found in the offing of Huacho-Callao (near 11°S) in August, it is pointed out that a local high pressure cell is generated in the atmosphere.     

Water-level fluctuations, emersion regimes, and variations of echinoid populations on a Caribbean reef flat

This paper examines fluctuations in water level over a Caribbean reef flat at Punta Galeta, Panamá. In an analysis of approximately ten years of records, the mean diurnal range of the tides was 24·5 cm and varied <2 cm from year to year. Daily mean water levels varied erratically over a range of approximately 30 cm. Monthly mean water levels fluctuated seasonally over a range of about 10 cm and were consistently higher than those at the regional tidal reference station at Cristóbal. On days with more wave action, water levels at Galeta increased relative to those at Cristóbal, suggesting that waves were ‘pumping’ water onto the reef flat. The monthly mean water levels at the two sites were not correlated, indicating that tidal data from conventional stations in deeper water cannot be extrapolated to reef flats, except as estimates of minimum potential water levels.Most of the reef flat was within 6 cm vertical span just below mean lower low water. The highest elevations within this range were exposed above water level for an average of 918 hours per year, as compared with 144 hours per year at the lowest elevation. Most exposures lasted less than 10 hours, with a modal duration of 3–5 hours; however, exposures longer than 12 hours occurred at nearly all elevations in all years. Exposures of the reef flat were most frequent between February and June and between August and November, a pattern apparently caused by a combination of seasonal oscillations of regional sea levels, the annual pattern of the solstitial tides, and waves generated by seasonal trade winds.The fluctuations in water levels apparently affected the abundances of some species of sea urchins on the reef flat. Populations of Lytechinus variegatus and Diadema antillarum declined or disappeared from the reef flat during seasons of repeated subaerial exposures, but recolonized the habitat in periods of higher water levels. Although they are reported to suffer heavy mortality during emersion, Echinometra lucunter and E. viridis did not exhibit reductions in abundance that were synchronous with the seasonal exposures of the reef flat.     

How to evaluate the quality of coarse‐resolution DEM‐derived drainage networks

The quality of digital elevation model (DEM)‐derived river drainage networks (RDNs) is influenced by DEM quality, basin physical characteristics, scale, and algorithms used; these factors should not be neglected. However, few research studies analyse the different evaluation approaches used in the literature with respect to adequacy, meaning of the results, advantages, and limitations. Focusing on coarse‐resolution networks, this paper reviews the use of these techniques and offers new insights on these issues. Additionally, we propose adaptations for selected metrics and discuss distinct interpretations for the evaluation of RDNs derived at different spatial resolutions (1, 5, 10, 20, and 30 km) considering the Uruguay River basin (206,000 km²) as a case study. The results demonstrate that lumped basin/river characteristics and basin delineation analysis should not be used as evaluation criteria for RDN quality; however, some of these metrics offer useful complementary information. Percentage of the DEM‐derived RDN within a uniform buffer placed around a river network considered as reference and mean separation distance between these two networks are more suitable metrics, but the former is insensitive to serious errors. The change in reference from a fine‐scale network to a coarse‐resolution manual tracing network significantly augments the discrepancy of these largest errors when the mean distance metric was applied, and visual comparison analysis is necessary to interpret the results for other metrics. We recommend the use of the mean distance metric in combination with a detailed visual assessment, the importance of which increases as the resolution coarsens. In both cases, the impact of network quality can be further refined by quantifying the basin shape and river length errors.