Inertial and hydrodynamic inertial loads on floating units

The analysis of the dynamic behavior of floating units usually employs a coordinate system with origin in the unit's center of gravity, which significantly simplifies the global mass matrix. Hydrodynamic coefficients are then computed considering the same coordinate system. However, to analyze other conditions of mass distribution and maintain the simplicity of a global mass matrix, it is necessary to determine again the hydrodynamic coefficients, thereby reducing the efficiency of the entire process. Another important point is that the geometries frequently used in floating units are such that the cross-terms of an added mass are relatively unimportant when compared with the main terms, and it is, therefore, common to use only some of them to analyze the unit's dynamic behavior. Recently, however, in the search for production systems suitable for water depths greater than 3000 m, other geometries have been considered in technical and economic feasibility studies. It is possible that for these new geometries all terms of the added mass matrix must be included in the analysis. This paper presents the full development used to determine the complete global mass matrix, the inertial and hydrodynamic inertial loads that make use of the added mass matrices considering any coordinate system and the six degrees of freedom, including all cross-terms.     

Holocene record of productivity in the NW Iberian continental shelf

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.     

The bimodal rift-related Juscelândia volcanosedimentary sequence in central Brazil: Mesoproterozoic extension and Neoproterozoic metamorphism

The Barro Alto Complex and Juscelândia volcanosedimentary sequence are exposed in the central part of the Neoproterozoic Brasília belt of central Brazil. The former is a large (approximately 150 km long), boomerang-shaped, mafic-ultramafic, layered complex formed by two different intrusions metamorphosed under granulite facies. These rocks are tectonically overlain by rocks of the Juscelândia volcanosedimentary sequence, represented mainly by biotite-gneiss and amphibolite, or amphibolite facies metamorphic equivalents of rhyolite and basalt, respectively. New SIMS U–Pb zircon data and Sm–Nd isochron data presented herein help clarify the igneous and metamorphic evolution of the Juscelândia volcanosedimentary sequence, as well as its relationship with the Barro Alto Complex. Zircon grains from two biotite gneisses were analyzed by SIMS (SHRIMP) and indicate Mesoproterozoic dates, approximately 1.28 Ga, interpreted as the time of bimodal volcanism in a tectonic setting transitional between a continental rift and an ocean basin. Metamorphism is constrained by Sm–Nd garnet-whole-rock isochrons for garnet amphibolite and pelitic schists of the Juscelândia sequence, as well as for clinopyroxene-garnet amphibolite and garnet granulite of the Barro Alto Complex, which give ages between 0.74 and 0.76 Ga, in agreement with SIMS dates for metamorphic zircon rims. These new data are significant, because they establish that a single metamorphic event affected both the Barro Alto Complex and the Juscelândia sequence. Based on these new data, we present a modified tectonic model for the Brasília belt.     

Haul-out pattern of itinerant male Antarctic fur seals (Arctocephalus gazella) at Laurie Island, South Orkney Islands

The seasonal haul-out pattern of itinerant male Antarctic fur seals ( Arctocephalus gazella ) was determined by regular counts at Mossman Peninsula, Laurie Island, South Orkney Islands, from 1996 to 2005. Small numbers of animals began to arrive at the beach in late December/early January (mean date 28 December Ø 15 days, n= 10). Peak numbers of animals ashore changed considerably between seasons. In 1996, 1998 and 2001, peak numbers were registered in March (6/3, 18/3 and 6/3, respectively). Numbers peaked in 1997, 1999 and 2005 at the end of January/beginning of February (26/1,2/2 and 28/1, respectively). In 2000, 2002, 2003 and 2004 peaks were registered in the third week of February (15/2, 22/2, 14/2 and 20/2, respectively). Peaks in numbers of seals ashore also varied between years, being minimum during 2001 (2531 individuals) and maximum during 2006 (16 610 individuals). In March 1998 the coasts of Laurie Island were surveyed by navigating inflatable boats near the shoreline; 18 haul-out places were identified. The big differences in peak numbers, as well as in the dates of peak events among years, suggest that local conditions could have an effect on the numbers of animals hauled out in a given year. It may therefore be difficult to predict trends from summer censuses in non-breeding places.     

Multiparametric Traveltime Inversion

In conventional seismic processing, the classical algorithm of Hubral and Krey is routinely applied to extract an initial macrovelocity model that consists of a stack of homogeneous layers bounded by curved interfaces. Input for the algorithm are identified primary reflections together with normal moveout (NMO) velocities, as derived from a previous velocity analysis conducted on common midpoint (CMP) data. This work presents a modified version of the Hubral and Krey algorithm that is designed to extend the original version in two ways, namely (a) it makes an advantageous use of previously obtained common-reflection-surface (CRS) attributes as its input and (b) it also allows for gradient layer velocities in depth. A new strategy to recover interfaces as optimized cubic splines is also proposed. Some synthetic examples are provided to illustrate and explain the implementation of the method.     

Looting, collecting, and the destruction of archaeological resources

Archaeological sites, the material remnants of our human past, are finite and nonrenewable cultural resources that are under constant threat from environmental forces, development activities, warfare, vandalism, and looting. Site looting is the destructive removal of archaeological objects to supply the art market. Looting is part of an economic system, the antiquities market, that works to supply the demand of collectors for archaeological objects. The destruction of archaeological resources by looters is an international crisis and threatens to obliterate the world’s cultural heritage and our ability to understand past cultures. The scale and intensity of the looting problem can be estimated by studying the extent of site destruction in countries of origin and by investigating the sources of antiquities held by collectors. Finding a solution to the problem of looting will require a focus on the demand side of the market (i.e., collectors) instead of the traditional focus on the supply side (looters, dealers)     

Modélisation morphodynamique cross-shore d'un estran vaseux

Numerical experiments were performed to simulate the profile evolution of an intertidal mudflat with a 1D cross-shore morphodynamical model. First, the hydrodynamical forcing is a cross-shore tidal current due to semi-diurnal variations of the free surface elevation at the open boundary. Further, considering the conservation of the action density of surface gravity waves, a wave height (and resulting bottom shear stress) calculation is added to the morphodynamical model. Results of the numerical experiments show that the shape of the profile reaches equilibrium. The mudflat progrades continually when the forcing is tide only, whereas it can be steady under the simultaneous action of tide and waves. To cite this article: B. Waeles et al., C. R. Geoscience 336 (2004).     

Comparison of llama fiber obtained from two production regions of Argentina

The Puna is an arid region running along the Andes mountains, more than 3600 m above sea level. Overgrazing has severely degraded much of this ecosystem, and this has dramatically reduced agricultural production and resulted in poverty for human inhabitants. Llamas are native to the Puna and are well suited to live there. Their grazing habits and digestive system make efficient use of native forages, and their padded feet keep soil disturbance to a minimum, thereby reducing erosion. Uncontrolled llama breeding over the last 500 years has degraded the quality of the fiber they produce, so today it is generally of low quality. Analysis of llama fibers obtained from two production regions of Argentina showed that some llamas possess sufficiently fine mean fiber diameters (less than 23 μm if guard hairs are excluded) to allow their fleeces to be sold at a premium. A higher price would make llamas more attractive to raise than the goats and sheep commonly found in the Puna today. Switching to llama production would increase grower income and sustainability of agriculture in the region.     

Kinetic energy–rainfall intensity relationship for Central Cebu, Philippines for soil erosion studies

In the study of soil erosion, specifically on detachment of soil particles by raindrop impact, kinetic energy is a commonly suggested indicator of the raindrop's ability to detach soil particles from the soil mass. Since direct measurement of kinetic energy requires sophisticated and costly instruments, the alternative approach is to estimate it from rainfall intensity. The present study aims at establishing a relationship between rainfall intensity and kinetic energy for rainfalls in Central Cebu, Philippines as a preface of a wider regional investigation.

Drop size distributions of rainfalls were measured using the disdrometer RD-80. There are two forms of kinetic energy considered here. One is kinetic energy per unit area per unit time (KE_R, J m⁻² h⁻¹) and the other is kinetic energy per unit area per unit depth (KE, J m⁻² mm⁻¹). Relationships between kinetic energy per unit area per unit time (KE_R) and rainfall intensity (I) were obtained using linear and power relations. The exponential model and the logarithmic model were fitted to the KE–I data to obtain corresponding relationships between kinetic energy per unit area per unit depth of rainfall (KE) and rainfall intensity (I). The equation obtained from the exponential model produced smaller standard error of estimates than the logarithmic model.     

Zero-offset P–S energy in horizontally layered media

The existence of non‐zero reflectivity for zero‐offset PS waves in horizontally layered media is discussed. Field measurements have suggested the occurrence of this phenomenon. We show that, in some cases, if anisotropy is considered in the problem, this reflectivity can be predicted. By using an approximated formulation to determine the coefficient of reflection in arbitrarily anisotropic media, it is clear that, for some elastic arrangements of the subsurface, reflected energy is associated with the converted wave resulting from normal P‐wave incidence.