Interannual variability in the biochemical composition of newly hatched larvae of the spider crab Maja brachydactyla (Decapoda,Majidae)

The spider crab Maja brachydactyla is an important commercial species in Europe and supports intensive fisheries in the NE Atlantic. A field survey was performed to assess long‐term and consecutive interannual (2005–2010) variation of the biochemical composition of newly hatched larvae of M. brachydactyla. Larval biochemical profiles differed significantly among years, with pronounced differences being recorded in 2010. Differences among batches of newly hatched larvae were mainly explained by the contribution of triacylglycerols and, to a lesser degree, by protein and lipid content. The use of different nutrition indices is discussed. The biochemical composition of newly hatched larvae from M. brachydactyla was highly variable, even though surveyed broodstock was obtained from the same local population and was always sampled during the same season. The unpredictable biochemical profiles of newly hatched larvae may condition their survival and recruitment. This largely overlooked aspect of larval variability should be considered in future fisheries management strategies and captive production of marine organisms that still rely on wild seeds.     

Trophic ecology of Pomatoschistus microps within an intertidal bay (Roscoff,France), investigated through gut content and stable isotope analyses

The diet of Pomatoschistus microps has been studied using both gut content and stable isotope analyses. In the Roscoff Aber Bay (Brittany, France), this fish is commonly found on sandy muddy intertidal flats. Gut content analyses were also interpreted using trophic indices. Owing to the large diversity of prey consumed, these indices emphasised the opportunistic feeding behaviour of P. microps. Here, this species fed mainly on endofauna with meiofauna being of high relative importance. The main biotic components of its trophic habitat, characterized by δ¹³C and δ¹⁵N, provided evidence of a major trophic pathway based on drift Enteromorpha sp. Trophic positions estimated by both diet analyses and isotopic analyses led to similar results. In this bay, P. microps is a first‐order predator with a low degree of omnivory. Despite a preferential consumption of the amphipod Corophium arenarium, we assumed that this goby behaves as a generalist feeding on a uniform variety of endofauna taxa.     

Diversity and temporal fluctuations of epiphytes and sessile invertebrates on the rhizomes Posidonia oceanica in a seagrass meadow off Tunisia

The aim of this work is to study the temporal dynamics of rhizome epiphytes and sessile animals living on the rhizomes of the seagrass Posidonia oceanica in the east of Tunisia. Surveys were conducted in October 2009, and in January, April and August 2010 on a fringing reef located in Chebba. Rhizomes were sampled by SCUBA diving at three stations. Samples were examined with a microscope to estimate the cover of macroinvertebrate and macroalgal organisms on the top 10 cm of each rhizome. Results revealed a high diversity of epiphytes on P. oceanica rhizomes with a dominance of red and brown algae, ascidians, and bryozoans. Distinct temporal changes were observed in Oued Lafrann, with a high January cover (winter period) for all groups. These winter increases can be attributed to: (i) the low phenological parameters of P. oceanica in winter that reduce the effects of shading, (ii) life cycles of the epiphytes and invertebrates, (iii) water motion and (iv) grazing.     

Movement patterns of individual migrating western rock lobster,Panulirus cygnus,in Western Australia

Abstract

Migrating and pre‐migrating western rock lobster Panulirus cygnus were tagged with datastorage tags that recorded temperature and pressure, which was converted to depth (Pressure (kPa) — surface pressure (kPa)/10)) at Dongara and Jurien Bay in Western Australia between December 2005 and December 2007. All lobsters were fitted with tag flotation devices, and returns were made by either commercial fishers or beachcombers who located detached tags. A total of 135 lobsters were released with “backpack” flotation tags, but only 84 (62.2%) of the backpacks carried data‐storage tags. Depths of release ranged from 5 to 113 m. Of the tagged lobsters released, commercial fishers recaptured 52 (38.5%), whereas 11 tags (8.1%) were found by beachcombers. At least 33%, and possibly up to 63%, of animals identified by their pale coloration as pre‐migrating individuals, failed to migrate. Those that did migrate (n = 11) were at liberty from 1 to 94 days and showed generally similar movement patterns in that they migrated only at night from darkness (after 2000 h) until after moonrise. However, their movement patterns were less constrained by the rising of the moon in deep water. Only 27% migrated nightly, compared with 73% that skipped migrating on one or more nights, to restart some days later. This latter proportion would likely have been considerably greater, but some migrating animals were only at large for short periods before recapture, and therefore had little time to show any variation to the nocturnal migration pattern. Individual speeds of migration during periods of activity were estimated for nine lobsters as 0.20 to 0.68 km h^?1, with a mean speed of 0.44 km h^?1, or 7.4 m min^?1. Improved knowledge of daily movement patterns resulting from this study provides a potentially important input into technological improvements in bait and pot design.     

Geotechnical characterization of slump scars,eroded slopes,and correlated deposits on continental margins: Gulf of Lions,Western Mediterranean sea

Abstract

Vertical variations of geotechnical properties in the uppermost sediment layers characterize the main sedimentary processes acting on the construction and destruction of progressive‐type continental slopes. In the Gulf of Lions, the original thicknesses and distribution of the uppermost sedimentary layers of the continental slope and rise, which consist of Holocene muds overlying Pleistocene muds, have been greatly modified by erosion and several kinds of slope failure processes. Each process is typified through sets of geotechnical properties measured in the eroded or slumped sections and in the associated sediment accumulations.

In slump scars, the water‐rich Holocene muds lie on fine, overconsolidated, Pleistocene muds with high plasticity and low shear strength. In bottom current‐eroded slopes, where modern sedimentation is extremely reduced, the Pleistocene muds frequently outcrop and may sometimes be overlain by a very thin layer of Holocene muds. The Pleistocene muds of eroded slopes are overconsolidated and more silty and less plastic than the Pleistocene muds from slopes affected by slope failure, their shear strength being 10 times greater.

Deposits at the toe of slumps are very often formed by several superposed three‐layer units (triplets of interstratified Holocene, transitional, and Pleistocene layers) issued from retrogressive slumping occurring in the slump scars above their head area. The main body of each layer is then relatively undisturbed, showing the usual burial geotechnical gradients due to overburden pressure (i.e., decrease of water content and increase of unit weight and shear strength). At the toe of bottom current‐eroded slopes, a thick and homogeneous layer of Holocene muds overlies the Pleistocene muds; this Holocene layer has unappreciable burial depth gradient of its geotechnical parameters because of a high rate of modem and continuous deposition.     

Sampling the vertical particle flux in the upper water column using a large diameter free-drifting NetTrap adapted to an Indented Rotating Sphere sediment trap

Further development of the large, surface-tethered sediment trap (NetTrap) employed as part of the MedFlux program is described whereby the large collection capacity of the NetTrap is combined with an Indented Rotating Sphere/Sample Carousel (IRSC) sediment trap (IRSC–NT). This trap is capable of collecting particle flux either in a time series or settling velocity mode; settling velocity mode allows the collection of particles that fall within discrete settling velocity intervals. During short field deployments in the Mediterranean Sea the IRSC–NT configured in the settling velocity mode successfully collected unpoisoned samples for chemical and microbiological experiments. In addition to the development of the IRSC–NT, particle-settling behavior above and below the swimmer-excluding IRS valve was tested during on-deck experiments using a specially constructed water-tight trap. Chemical analyses of settling materials (published elsewhere) suggested that separation of particles by settling velocity was achieved. However, due to the motion of the ship, it was not possible to directly measure particle-settling velocities within the trap. Particle release from the IRS did not bias the apparent settling velocity spectrum. Rotation of the IRS did not engender turbulence at the surface of the sphere or within the skewed funnel below. Tests of different ball designs over the course of the MedFlux program showed that a “ridge and saddle” pattern was optimal for efficiently transferring particles under the IRS seal while still reducing swimmer entrance to the collection funnel. The large size of the IRSC–NT did not prevent it from drifting effectively with the current. Several modifications of the present design are proposed that should improve the accuracy of the settling velocity measurements.     

Distribution and spatial variation of hydrothermal faunal assemblages at Lucky Strike (Mid-Atlantic Ridge) revealed by high-resolution video image analysis

Whilst the fauna inhabiting hydrothermal vent structures in the Atlantic Ocean is reasonably well known, less is understood about the spatial distributions of the fauna in relation to abiotic and biotic factors. In this study, a major active hydrothermal edifice (Eiffel Tower, at 1690 m depth) on the Lucky Strike vent field (Mid-Atlantic Ridge (MAR)) was investigated. Video transects were carried out by ROV Victor 6000 and complete image coverage was acquired. Four distinct assemblages, ranging from dense larger-sized Bathymodiolus mussel beds to smaller-sized mussel clumps and alvinocaridid shrimps, and two types of substrata were defined based on high definition photographs and video imagery. To evaluate spatial variation, faunal distribution was mapped in three dimensions. A high degree of patchiness characterizes this 11 m high sulfide structure. The differences observed in assemblage and substratum distribution were related to habitat characteristics (fluid exits, depth and structure orientation). Gradients in community structure were observed, which coincided with an increasing distance from the fluid exits. A biological zonation model for the Eiffel Tower edifice was created in which faunal composition and distribution can be visually explained by the presence/absence of fluid exits.     

Midlittoral polychaete communities in the Eastern Mediterranean Sea: new information from the implementation of the Natural Geography in Shore Areas (NaGISA) protocol and comparisons at local and regional scales

The aim of this study was to attempt to fill current knowledge gaps on midlittoral Mediterranean biodiversity at local and regional scales, by using benthic polychaetes as a model taxon. Two different data sets were analysed: (i) a quantitative data set from the two Natural Geography in Shore Areas (NaGISA) study sites in Crete and (ii) a qualitative data set from multiple sites across the Mediterranean. At the local scale, the results provide evidence that (i) discrete species communities are formed in midlittoral Mediterranean habitats, which vary by geographical location and year, depending on the scale of observation; (ii) macrophyte coverage and Chl‐a are the only environmental variables associated, albeit weakly, with the above pattern; (iii) although naturally disturbed, the Cretan NaGISA sites do not seem to experience any anthropogenic stress; (iv) environmental heterogeneity and history seem to be much less important in shaping the polychaete communities than inter‐specific interactions; however, it is not possible to specify at this stage whether local or regional processes or even their interactions may shape the polychaete communities. At the regional scale, the results indicate that (i) the only factor that seems to be involved in the regional pattern is the identity of the study providing the data sets, which implies variability and bias in how research projects are carried out, from the sampling design through to data collection and analysis; (ii) the Cretan NaGISA sites may be considered as representative of the habitat in the Mediterranean, under certain conditions.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.