Tectonic evolution of an intraplate basin: the Lower Tagus Cenozoic Basin,Portugal

This article focuses on the reinterpretation of well, seismic reflection, magnetic, gravimetric, surface wave and geological surface data, together with the acquisition of seismic noise data to study the Lower Tagus Cenozoic Basin tectono‐sedimentary evolution. For the first time, the structure of the base of the basin in its distal and intermediate sectors is unravelled, which was previously only known in the areas covered by seismic reflection data (distal and small part of intermediate sectors). A complex geometry was found, with three subbasins delimited by NNE‐SSW faults and separated by WNW‐ESE to NW‐SE oriented horsts. In the area covered by seismic reflection data, four horizons were studied: top of the Upper Miocene, Lower to Middle Miocene top, the top of the Palaeogene and the base of Cenozoic. Seismic data show that the major filling of the basin occurred during Upper Miocene. The fault pattern affecting Neogene and Palaeogene units derived here points to that of a polyphasic basin. In the Palaeogene, the Vila Franca de Xira (VFX) and a NNE‐SSW trending previously unknown structure (ABC fault zone) probably acted as the major strike‐slip fault zones of the releasing bend of a pull‐apart basin, which produced a WNW‐ESE to NW‐SE fault system with transtensional kinematic. During the Neogene, as the stress regime rotated anticlockwise to the present NW‐SE to WNW‐ESE orientation, the VFX and Azambuja fault zones acted as the major transpressive fault zones and Mesozoic rocks overthrusted Miocene sediments. The reactivation of WNW‐ESE to NW‐SE fault systems with a dextral strike‐slip component generated a series of horsts and grabens and the partitioning of the basin into several subbasins. Therefore, we propose a polyphasic model for the area, with the formation of an early pull‐apart basin during the Palaeogene caused by an Iberia–Eurasia plates collision that later evolved into an incipient foreland basin along the Neogene due to a NW‐SE to WNE‐ESE oriented Iberia–Nubia convergence. This convergence is producing uplift in the area since the Quaternary except for the Tagus estuary subbasin around the VFX fault, where subsidence is observed. This may be due to the locking or the development of a larger component of strike‐slip movement of the NNE‐SSW to N‐S thrust fault system with the exception of the VFX fault, which is more favourably oriented to the maximum compressive stress.     

A Chart for Judging Optimal Sample Spacing for Ore Grade Estimation

Mineral deposit grades are usually estimated using data from samples of rock cores extracted from drill holes. Commonly, mineral deposit grade estimates are required for each block to be mined. Every estimated grade has always a corresponding error when compared against real grades of blocks. The error depends on various factors, among which the most important is the number of correlated samples used for estimation. Samples may be collected on a regular sampling grid and, as the spacing between samples decreases, the error of grade estimated from the data generally decreases. Sampling can be expensive. The maximum distance between samples that provides an acceptable error of grade estimate is useful for deciding how many samples are adequate. The error also depends on the geometry of a block, as lower errors would be expected when estimating the grade of large-volume blocks, and on the variability of the data within the region of the blocks. Local variability is measured in this study using the coefficient of variation (CV). We show charts analyzing error in block grade estimates as a function of sampling grid (obtained by geostatistical simulation), for various block dimensions (volumes) and for a given CV interval. These charts show results for two different attributes (Au and Ni) of two different deposits. The results show that similar errors were found for the two deposits, although they share similar features: sampling grid, block volume, CV, and continuity model. Consequently, the error for other attributes with similar features could be obtained from a single chart.     

Identifying groundwater recharge connections in the Moscow (USA) sub-basin using isotopic tracers and a soil moisture routing model

Globally, aquifers are suffering from large abstractions resulting in groundwater level declines. These declines can be caused by excessive abstraction for drinking water, irrigation purposes or industrial use. Basaltic aquifers also face these conflicts. A large flood basalt area (1.1?×?10⁵ km²) can be found in the Northwest of the USA. This Columbia River Basalt Group (CRBG) consists of a thick series of basalt flows of Miocene age. The two major hydrogeological units (Wanapum and Grand Ronde formations) are widely used for water abstraction. The mean decline over recent decades has been 0.6 m year^?1. At present day, abstraction wells are drying up, and base flow of rivers is reduced. At the eastern part of CRBG, the Moscow sub-basin on the Idaho/Washington State border can be found. Although a thick poorly permeable clay layer exists on top of the basalt aquifer, groundwater level dynamics suggest that groundwater recharge occurs at certain locations. A set of wells and springs has been monitored bi-weekly for 9 months for δ¹⁸O and δ²H. Large isotopic fluctuations and d-excess values close to the meteoric water line in some wells are indicating that recharge occurs at the granite/basalt interface through lateral flow paths in and below the clay. A soil moisture routing (SMR) model showed that most recharge occurs on the granitic mountains. The basaltic aquifer receives recharge from these sedimentary zones around the granite/basalt interface. The identification of these types of areas is of major importance for future managed-aquifer recharge solutions to solve problems of groundwater depletion.     

Shallow-level differentiation of phonolitic lavas from Sumaco Volcano,Ecuador

Sumaco Volcano is located in the rear-arc of Ecuador and produces phonolitic alkaline lavas hosting a unique assemblage of minerals including haüyne and titanaugite. The most mafic lavas are picrobasalts that contain titanaugite as the primary mineral phase; the most evolved tephri-phonolite lavas contain titanaugite?+?anorthoclase?+?haüyne. Titanaugite forms at middle to deep crustal pressures, whereas haüyne is only stable at shallow depths in highly oxidizing conditions. The Sumaco mineral assemblages and geochemistry indicate that fractionation of the titanaugite- and haüyne-bearing assemblage took place over a range of pressures from 5 to 25 kbar (14–75 km), with at least 50% of differentiation taking place at shallow crustal levels. Minerals record multiple cycles of recharge and mixing accompanied by an increase in fO₂ and sulfur concentration during differentiation. Mantle-like Sr and Nd isotope values (⁸⁷Sr/⁸⁶Sr = 0.70406–0.70423; ¹⁴³Nd/¹⁴⁴Nd = 0.512880–0.512913) indicate minimal crustal assimilation. Sumaco’s unique geochemical composition is not observed in the nearby volcanoes Antisana, Pan de Azucar or El Reventador suggesting that its unique magma source is confined to this volcano. The high temperature and sulfate-saturated conditions at shallow depths suggest that magma ascends rapidly to a shallow reservoir where the majority of crystallization and recharge takes place prior to eruption. An important conclusion of this research is that Sumaco does not represent typical rear-arc subduction processes, and caution should be used when using Sumaco as an end-member to evaluate across-arc processes in the Northern Volcanic Zone.     

FedIDS: a federated cloud storage architecture and satellite image delivery service for building dependable geospatial platforms

Earth observation satellites produce large amounts of images/data that not only must be processed and preserved in reliable geospatial platforms but also efficiently disseminated among partners/researchers for creating derivative products through collaborative workflows. Organizations can face up this challenge in a cost-effective manner by using cloud services. However, outages and violations of integrity/confidentiality associated to this technology could arise. This article presents FedIDS, a suite of cloud-based components for building dependable geospatial platforms. The Fed component enables organizations to build shared geospatial data infrastructure through federation of independent cloud resources to withstand outages, whereas IDS avoids violations of integrity/confidentiality of images/data in sharing information and collaboration workflows. A FedIDS prototype, deployed in Spain and Mexico, was evaluated through a study case based on a satellite imagery captured by a Mexican antenna and another based on a satellite imagery of a European observation mission. The acquisition, storage and sharing of images among users of the federation, the exchange of images between Mexican and Spanish sites and outage scenarios were evaluated. The evaluation revealed the feasibility, reliability and efficiency of FedIDS, in comparison with available solutions, in terms of performance, storage consume and integrity/confidentiality when sharing images/data in collaborative scenarios.     

On the Use of the Beta Distribution in Probabilistic Resource Assessments

The triangular distribution is a popular choice when it comes to modeling bounded continuous random variables. Its wide acceptance derives mostly from its simple analytic properties and the ease with which modelers can specify its three parameters through the extremes and the mode. On the negative side, hardly any real process follows a triangular distribution, which from the outset puts at a disadvantage any model employing triangular distributions. At a time when numerical techniques such as the Monte Carlo method are displacing analytic approaches in stochastic resource assessments, easy specification remains the most attractive characteristic of the triangular distribution. The beta distribution is another continuous distribution defined within a finite interval offering wider flexibility in style of variation, thus allowing consideration of models in which the random variables closely follow the observed or expected styles of variation. Despite its more complex definition, generation of values following a beta distribution is as straightforward as generating values following a triangular distribution, leaving the selection of parameters as the main impediment to practically considering beta distributions. This contribution intends to promote the acceptance of the beta distribution by explaining its properties and offering several suggestions to facilitate the specification of its two shape parameters. In general, given the same distributional parameters, use of the beta distributions in stochastic modeling may yield significantly different results, yet better estimates, than the triangular distribution.     

Intra- and inter-specific variability in total and methylmercury bioaccumulation by eight marine fish species from the Azores

We relate fish biological and ecological characteristics to total and organic mercury concentrations to determine whether accumulation is influenced by trophic level, Hg concentration in the diet, and vertical distribution. Levels of total mercury and methylmercury were determined in the muscle tissue of eight species of fish: Pagellus acarne, Trachurus picturatus, Phycis phycis, P. blennoides, Polyprion americanus, Conger conger, Lepidopus caudatus and Mora moro, caught in the Azores. All such fishes are commercially valuable and were selected to include species from a wide range of vertical distributions from epipelagic (<200 m) to mesopelagic (>300 m) environments. Methylmercury was the major form accumulated in all species, comprising an average of 88.1% of total mercury. Concentrations of mercury (total and methylmercury) increased with age, length and weight. Based on data from other studies, mercury concentrations in fish diet were estimated. Mercury levels in food ranged from 0.08 to 0.32 ppm, dry weight. Hg concentrations in the food and in muscle tissue from different species were positively correlated. Total Hg levels in the muscles were approximately nine times those estimated in food. Total mercury concentrations in muscle were positively correlated with both trophic level and median depth. Such enhanced mercury bioaccumulation in relation to depth appears to be determined primarily by concentrations in food and ultimately by water chemistry, which controls mercury speciation and uptake at the base of the food chain.     

Constraints on metasomatized mantle under Central South America: evidence from Jurassic alkaline lamprophyre dykes from the Eastern Cordillera, NM Argentina

In the Río Grande Valley, NW Argentina, several porphyritic panidiomorphic, ocelli-bearing dykes and sills intrude the Neoproterozoic to lower Paleozoic basement of the Eastern Cordillera. New petrographical and geochemical data permit us to classify these rocks as ocellar-analcime monchiquites, a feldspar-free variety of alkaline lamprophyre composed of Ti-rich-diopside/augite, Ti-rich biotite/phlogopite, forsteritic olivine, titanian-pargasite and analcime, with abundant ocelli filled with analcime/carbonate. In terms of geochemical compositions they are characterized by LILE and LREE enrichment and lack of Nb-Ta and Eu anomalies. The ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd initial ratios range between 0.70377 to 0.70781 and 0.512506 and 0.512716 respectively, and T_DM model ages vary between 0.25–0.64 Ga. A K-Ar age of 163?±?9 Ma suggests that these rocks are related to the pre-rifting stage of the Mesozoic-Cenozoic continental Salta Rift in NW Argentina. Partial melting of a heterogeneous enriched metasomatized lithospheric mantle, magma mixing and fractionation are envisaged to explain the petrographic, geochemical and isotope characteristics of these magmas.     

GGR Biennial Review: Advances in Laser Ablation and Solution ICP-MS from 2008 to 2009 with Particular Emphasis on Sensitivity Enhancements,Mitigation of Fractionation Effects and Exploration of New Applications

Recent developments from 2008 to 2009 in ICP-MS engineering, methods and applications are reviewed here. Of particular emphasis are advances in: (a) maximising sensitivity and reducing elemental/isotopic fractionation during laser ablation processing; (b) developing new analytical techniques to measure major, minor and trace element abundances without depending on matrix-matched calibrating materials, pre-determined internal standard concentrations and/or multiple analytical methods; (c) applying in situ and solution-based ICP-MS techniques to the analysis of forensic materials for criminal and/or nuclear investigations; and (d) improving precision and limits of detection of laser ablation multi-collector ICP-MS measurements of (ultra) trace elemental and isotopic abundances.