THERMAP: a mid-infrared spectro-imager for space missions to small bodies in the inner solar system

We present THERMAP, a mid-infrared spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it is both a thermal camera with full 2D imaging capabilities and a slit spectrometer. THERMAP takes advantage of the recent technological developments of uncooled microbolometer arrays, sensitive in the mid-infrared spectral range. THERMAP can acquire thermal images (8–18 μm) of the surface and perform absolute temperature measurements with a precision better than 3.5 K above 200 K. THERMAP can acquire mid-infrared spectra (8–16 μm) of the surface with a spectral resolution Δλ of 0.3 μm. For surface temperatures above 350 K, spectra have a signal-to-noise ratio >60 in the spectral range 9–13 μm where most emission features occur.     

Rock-magnetic properties of topsoils and urban dust from Morelia (>800,000 inhabitants), Mexico: Implications for anthropogenic pollution monitoring in Mexico’s medium size cities

In this work, we investigate the correlation between some magnetic parameters and the level of contamination by heavy metals in urban soils from Morelia city, western Mexico. The magnetic study was carried out on 98 urban soils samples belonging to distinct land uses. Most of analyzed samples contain ferrimagnetic minerals as the responsible for magnetization, most probably corresponding to the titanomagnetites/ titanomaghemites solid solutions. This is inferred from the susceptibility vs. temperature measurements and the isothermal remanent magnetization (IRM) experiments. These measurements also indicate that most of samples are almost completely saturated before 300 mT. Additionally, the S_-200 values (S_-200 = IRM_-200/ SIRM, where IRM_-200= Back-field of 200 mT after magnetic saturation) are between 0.7 and 1.0, characteristic of low coercivity magnetic minerals. The averaged saturation isothermal remanent magnetization (SIRM) curves can be used as an indicator of pollution level, as these curves show different saturation values according to the level of contamination by heavy metals: Cu, Ni, Cr and Sr. These associations of (titano)magnetite with heavy metals were observed by Scanning Electron Microscope revealing some complex aggregates rather than commonly detected spherules.     

Archeointensity investigation on pottery vestiges from Puertas de Rolón, Capacha culture: In search for affinity with other Mesoamerican pre-Hispanic cultures

We report the results of a rock magnetic and archeointensity study on pottery fragments recovered at the archaeological site of Puertas de Rolón, Capacha culture (Colima), that is considered one of the most important pre-Classic cultural developments of western Mesoamerica, Mexico. Standard rock magnetic experiments were carried out in order to investigate the reliability of the ancient field strength recovered from studied materials. Six out of the seven analyzed fragments gave reliable intensity determinations. The mean archeointensity value obtained in this study is 35.3 ± 3.4 μT. It is in good agreement with another contemporaneous Mesoamerican mean archeointensity of 34.3 ± 1.1 μT obtained for El Opeño. Statistically similar rock-magnetic parameters between ceramics from El Opeño and Puertas de Rolón potsherds appear to be related to clay-sources with similar geological settings and weathering processes. Alternatively, ancient trade or interexchange between western (Capacha Culture) and eastern Mesoamerica locations, as it has been proposed earlier, seem to be supported by results obtained in this study.     

GRIS: The GREGOR Infrared Spectrograph

This paper describes the main characteristics of GRIS (GREGOR Infrared Spectrograph), the grating spectrograph installed in the recently inaugurated (May 2012) 1.5‐meter GREGOR telescope located at the Observatorio del Teide in Tenerife. The spectrograph has a standard Czerny‐Turner configuration with parabolic collimator and camera mirrors that belong to the same conic surface. Although nothing prevents its use at visible wavelengths, the spectrograph will be initially used in combination with the infrared detector of the Tenerife Infrared Polarimeter (TIP‐II) in standard spectroscopic mode as well as for spectropolarimetric measurements (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Modal pushover‐based scaling of earthquake records for nonlinear analysis of single‐story unsymmetric‐plan buildings

The modal pushover‐based scaling (MPS) procedure, currently restricted to symmetric‐plan buildings, is extended herein to unsymmetric‐plan buildings. The accuracy of the extended MPS procedure was evaluated for a large set of three‐degree‐of‐freedom unsymmetric‐plan structures with variable stiffness and strength. The structures were subjected to nonlinear response history analysis considering sets of seven records scaled according to the MPS procedure. Structural responses were compared against the benchmark values, defined as the median values of the engineering demand parameters due to 30 unscaled records. This evaluation of the MPS procedure has led to the following conclusions: (i) the MPS procedure provided accurate estimates of median engineering demand parameter values and reduced record‐to‐record variability of the responses; and (2) the MPS procedure is found to be much superior compared to the ASCE/SEI 7‐10 scaling procedure for three‐dimensional analysis of unsymmetric‐plan buildings. Copyright © 2013 John Wiley & Sons, Ltd.     

Relationships between physiological stress and trace toxic substances in the bay mussel, Mytilus edulis, from San Francisco bay,California

Resident populations of Mytilus edulis from Tomales and San Francisco Bay, California, were measured for scope of growth, a physiological integration of the energy consumed by individual animals (feeding rate and assimilation efficiency) less the energy lost in metabolic processes (oxygen consumption and ammonia excretion). Scope for growth of mussels was significantly correlated (p≤ 0·05) with feeding rates. There was a significant decline in the scope for growth between the Golden Gate, at the bay's entrance and RedwoodCity in south San Francisco Bay. The scope for growth in resident M. edulis was significantly negatively correlated (p≤ 0·05) with increased environmental concentrations (from transplanted M. californianus body burden data) of the following trace elements and higher molecular weight chlorinated organic compounds: Cr, Cu, Hg (p ≤ 0·01) and Ag, Al, Zn, total chlordanes, and dieldrin. Scope for growth was significantly correlated (p ≤0·05) with body condition index (dry body weight1shell length).     

Bioerosion by the sea urchin Diadema mexicanum along Eastern Tropical Pacific coral reefs

Bioerosion is a natural process in coral reefs. It is fundamental to the health of these ecosystems. In the Eastern Tropical Pacific (ETP) coral reefs, the most important bioeroders are sponges, bivalves, sea urchins and the fish Arothron meleagris. In the 1980s, El Niño caused high coral mortality and an increase in macroalgal growth. As a result, greater sea urchin bioerosion occurred. This weakened the reef framework. Considering the high vulnerability of the ETP coral reefs, the goal of this study was to determine the current bioerosion impact of the sea urchin Diadema mexicanum along the western coasts of Mexico, El Salvador, Costa Rica and Panamá. The balance between coral bioaccretion and sea urchin bioerosion was also calculated. Between 2009 and 2010, in 12 coral reefs localities, D. mexicanum density, bottom cover and rugosity were quantified along band transects. The daily bioerosion rate was obtained from the amount of carbonates evacuated by sea urchins per unit time. The rate of coral accretion was calculated by multiplying the coral growth rate of the dominant genus by the density of their skeleton and by their specific coral cover. The localities were dissimilar (R = 0.765, P < 0.001) in terms of live coral cover, crustose calcareous algae, turf cover, rugosity index, and density and size of D. mexicanum. At all sites, with the exception of Bahía Culebra (Costa Rica), coral bioerosion was less than coral bioaccretion. Diadema mexicanum plays a dominant role in the balance of carbonates in the ETP, but this depends on reef condition (protection, overfishing, eutrophication) and so the impacts can be either positive or negative.     

A study on the dissolution rates of K-Cr(VI)-jarosites: kinetic analysis and implications

Background

The presence of natural and industrial jarosite type-compounds in the environment could have important implications in the mobility of potentially toxic elements such as lead, mercury, arsenic, chromium, among others. Understanding the dissolution reactions of jarosite-type compounds is notably important for an environmental assessment (for water and soil), since some of these elements could either return to the environment or work as temporary deposits of these species, thus would reduce their immediate environmental impact.

Results

This work reports the effects of temperature, pH, particle diameter and Cr(VI) content on the initial dissolution rates of K-Cr(VI)-jarosites (KFe₃[(SO₄)_2 ? X(CrO₄)_X](OH)₆). Temperature (T) was the variable with the strongest effect, followed by pH in acid/alkaline medium (H₃O⁺/OH^?). It was found that the substitution of CrO₄ ^2?in Y-site and the substitution of H₃O⁺ in M-site do not modify the dissolution rates. The model that describes the dissolution process is the unreacted core kinetic model, with the chemical reaction on the unreacted core surface. The dissolution in acid medium was congruent, while in alkaline media was incongruent. In both reaction media, there is a release of K⁺, SO₄ ^2? and CrO₄ ^2? from the KFe₃[(SO₄)_2 ? X(CrO₄)_X](OH)₆ structure, although the latter is rapidly absorbed by the solid residues of Fe(OH)₃ in alkaline medium dissolutions. The dissolution of KFe₃[(SO₄)_2 ? X(CrO₄)_X](OH)₆ exhibited good stability in a wide range of pH and T conditions corresponding to the calculated parameters of reaction order n, activation energy E _A and dissolution rate constants for each kinetic stages of induction and progressive conversion.

Conclusions

The kinetic analysis related to the reaction orders and calculated activation energies confirmed that extreme pH and T conditions are necessary to obtain considerably high dissolution rates. Extreme pH conditions (acidic or alkaline) cause the preferential release of K⁺, SO₄ ^2? and CrO₄ ^2? from the KFe₃[(SO₄)_2 ? X(CrO₄)_X](OH)₆ structure, although CrO₄ ^2? is quickly adsorbed by Fe(OH)₃ solid residues. The precipitation of phases such as KFe₃[(SO₄)_2 ? X(CrO₄)_X](OH)₆, and the absorption of Cr(VI) after dissolution can play an important role as retention mechanisms of Cr(VI) in nature.

     

Late Quaternary tephrostratigraphy,Ahklun Mountains,SW Alaska

Radiocarbon‐dated sediment cores from six lakes in the Ahklun Mountains, south‐western Alaska, were used to interpolate the ages of late Quaternary tephra beds ranging in age from 25.4 to 0.4 ka. The lakes are located downwind of the Aleutian Arc and Alaska Peninsula volcanoes in the northern Bristol Bay area between 159° and 161°W at around 60°N. Sedimentation‐rate age models for each lake were based on a published spline‐fit procedure that uses Monte Carlo simulation to determine age model uncertainty. In all, 62 ¹⁴C ages were used to construct the six age models, including 23 ages presented here for the first time. The age model from Lone Spruce Pond is based on 18 ages, and is currently the best‐resolved Holocene age model available from the region, with an average 2σ age uncertainty of about ± 109 years over the past 14.5 ka. The sedimentary sequence from Lone Spruce Pond contains seven tephra beds, more than previously found in any other lake in the area. Of the 26 radiocarbon‐dated tephra beds at the six lakes and from a soil pit, seven are correlated between two or more sites based on their ages. The major‐element geochemistry of glass shards from most of these tephra beds supports the age‐based correlations. The remaining tephra beds appear to be present at only one site based on their unique geochemistry or age. The 5.8 ka tephra is similar to the widespread Aniakchak tephra [3.7 ± 0.2 (1σ) ka], but can be distinguished conclusively based on its trace‐element geochemistry. The 3.1 and 0.4 ka tephras have glass major‐ and trace‐element geochemical compositions indistinguishable from prominent Aniakchak tephra, and might represent redeposited beds. Only two tephra beds are found in all lakes: the Aniakchak tephra (3.7 ± 0.2 ka) and Tephra B (6.1 ± 0.3 ka). The tephra beds can be used as chronostratigraphic markers for other sedimentary sequences in the region, including cores from Cascade and Sunday lakes, which were previously undated and were analyzed in this study to correlate with the new regional tephrostratigraphy. Copyright © 2012 John Wiley & Sons, Ltd.     

Response surface methodology for lead biosorption on Aspergillus terreus

A central composite face-centered design was used to study and to optimize lead biosorption from aqueous solution on Aspergillus terreus biomass. Four factors such as stirring speed, temperature, solution pH and biomass dose at different levels were studied.The hierarchical quadratic model were established by adding replicates at the central point and axial points to the initial full factorial design (2⁴). The percentage removal of lead was affected by biomass dose, pH, and interactions between pH and biomass dose, pH and stirring speed, pH and temperature. The hierarchical quadratic model described adequately the response surface based on the adjusted determination coefficient (R² _Adj= 0.97) and the adequate precision ratio (42.21). According to this model, the optimal conditions to remove lead completely from aqueous solutions (at initial lead concentration of 50 mg/L and solutions of 100 mL) with Aspergillus terreus were at pH 5.2, 50 °C, stirring speed of 102/min and a biomass dose of 139 mg.The response surface methodology can be used to determine the optimal conditions for metal adsorption on several adsorbents. In addition, results reported in this research demonstrated the feasibility of employing A. terreus as biosorbent for lead removal.