History and necessity: the evolution of soil conservation technology in a Jamaican farming system

The soil conservation campaigns that have been a prominent feature of Jamaican agricultural policy since the 1950s are frequently presented as having failed to ameliorate the problem of soil erosion in hillside agriculture. A case study of a small farming community in the Blue Mountains explores the development of the soil conservation practices currently employed by farmers. The use of trash barriers in carrot farming is described and the origins of this technology and its subsequent adaptation are considered. The study concludes that extension interventions and government policy have influenced the development of current soil conservation practices; practices which have their roots in indigenous techniques. Other factors such as the adaptation of trash barriers to suit local conditions and their importance in soil fertility management also play a role in their widespread use in the study area. The study demonstrates that to understand the process of technical change in farming communities, it is necessary to consider a range of factors, external and internal, technical and social, that have over time influenced farmers' decision making.     

Seasonal variation of the soil seed bank of grasses in central Argentina as related to grazing and shrub cover

The objectives of this research were to (a) study seasonal variation of the seed bank of grasses in two areas with different grazing history, (b) analyse the effect of the presence of shrubs on the seed bank and (c) study seed viability and dormancy in buried seeds of Piptochaetium napostaense and Stipa tenuis. The seed density of grasses was in general low and showed seasonal variation. Most of the grasses showed maximum seed density in December when seed dispersal occurs. Shrub cover did not show a marked influence in seed accumulation. The relatively high number of damaged seeds suggests that predation may be an important factor in seed bank dynamics in the Caldenal. Seeds of dominant perennial forage grasses showed dormancy that could explain, at least in part, persistence of these species in spite of periodical disturbance.     

Flexure of the Indian plate and intraplate earthquakes

The flexural bulge in central India resulting from India's collision with Tibet has a wavelength of approximately 670 km. It is manifest topographically and in the free-air gravity anomaly and the geoid. Calculations of the stress distribution within a flexed Indian plate reveal spatial variations throughout the depth of the plate and also a function of distance from the Himalaya. The wavelength (and therefore local gradient) of stress variation is a function of the effective elastic thickness of the plate, estimates of which have been proposed to lie in the range 40–120 km. The imposition of this stress field on the northward moving Indian plate appears fundamental to explaining the current distribution of intraplate earthquakes and their mechanisms. The current study highlights an outer trough south of the flexural bulge in central India where surface stresses are double the contiguous compressional stresses to the north and south. The Bhuj, Latur and Koyna earthquakes and numerous other recent reverse faulting events occurred in this compressional setting. The N/S spatial gradient of stress exceeds 2 bars/km near the flexural bulge. The overall flexural stress distribution provides a physical basis for earthquake hazard mapping and suggests that areas of central India where no historic earthquakes are recorded may yet be the locus of future damaging events.     

MODELING STUDY ON SEDIMENTATION CONFIGURATION IN FRONT OF THE DAM AND IN THE PRESSURE CONDUIT OF BOTTOM OUTLETS BY FLUME EXPERIMENT

I.INTRODUCTIONReseri,oirsonoverloadedriverswillreachthestateofrelativeequilibriumwithcontinuousdevelopmentofsedimentation.Insuchcase,thereisdePOsitinfrontofthedam.Thereforethesiltpressureonthedambodyisconsiderablylarge.Sedimentationelevationinfrontofthedamisoneofthefactorsofcalculatingthesiltpressure.Inaddition,tokeeplong-termworkingstorageinreservoif,itisnecessarytoinstallbottomoutlets.Asthereisapressureconduitinfrontoftheoperatinggateofthebottomoutlet,thesedimelltenteredtheconduitwill…     

Calculating the two-dimensional magnetotelluric Jacobian in finite elements using reciprocity

To speed up the calculation of the field Jacobian for 2-D magnetoteliuric inversion using finite elements, the principle of electromagnetic reciprocity is applied. The governing relationship for the Jacobian of the field along strike is obtained by differentiating the Helmholtz equation with respect to the resistivity of each region in the finite-element mesh. The result is a similar Helmholtz equation for the Jacobian, with new sources distributed over all nodes within the parameter medium. However, according to the principle of electromagnetic reciprocity, the roles of sources and receivers are interchangeable. Utilizing reciprocity, the field values obtained from the original forward problem and for new unit sources imposed at the receivers are then utilized in the calculation of the Jacobian by simple multiplication and summation with finite-element terms at each rectangle in the mesh. For the auxiliary (across-strike) fields, the Jacobian terms are obtained by solving source vectors loaded with parabola coefficients used in the approximation to Maxwell's equations. Jacobian terms for the apparent resistivity ( p _a), the impedance phase (φ) and the vertical magnetic field ( K _zy) are then calculated utilizing the parallel- and auxiliary-field Jacobians. Comparison of Jacobian values obtained from reciprocity calculations and by differencing two forward solutions show that the reciprocity method is accurate and can be used to decrease the number of calculations required to obtain sensitivities by one to two orders of magnitude.     

The use of GPR and VES in delineating a contamination plume in a landfill site: a case study in SE Brazil

This paper presents the results of the application of the Ground Penetrating Radar (GPR) method, or Georadar, in outlining a zone of contamination due to solid residues at the waste burial site of Rio Claro in the state of São Paulo, SE Brazil. A total of eight GPR profiles with 50- and 100-MHz antennae were surveyed. Six profiles were located within the landfill site and the remaining two were outside. The main objective of the GPR survey was to evaluate the side extension of contamination. A Vertical Electric Sounding (VES) survey was performed at four points within the site in order to investigate the vertical extent of the contamination plume and to define the bottom of the landfill. Two additional VESs were done outside the landfill with the purpose of determining the top of the ground water table and the geoelectric stratigraphy of the background. From the interpretation of the GPR profiles, it was possible to locate the top of the contamination plume and to infer that it was migrating laterally beyond the limits of the waste disposal site. This was observed along the profile situated close to the highway SP-127, which was about 20 m from the limit of the site. The signature of the contaminant appears as a discontinuous reflector that is believed to be a shallow ground water table. The discontinuity is marked by a shadow zone, which is characteristic of conductive contaminant residues. The contamination did not move far enough to reach a sugar cane plantation located at approximately 100 m from the border of the site. In the regions free from contamination, the ground water table was mapped at approximately 10 m of depth, and it was characterized by a strong and continuous reflector. The radar signal penetrated deep enough and enabled the identification of a second reflector at approximately 14 m deep, interpreted as the contact between the Rio Claro and the Corumbataí formations. The contact is marked by the presence of gravel characterized by ferruginous concretes, which cause the strong amplitude reflection in the GPR profile. Within the landfill site, the quantitative interpretation of the VES results showed the contamination zone. The base of the landfill varies between 11 and 15 m deep. Outside the landfill site, the VES results showed no indication of contamination and allowed the determination of the top of the ground water table and the contact between the Rio Claro and the Corumbataí formations. The results of GPR and VES showed a good agreement and the integrated interpretations were supported by local geology and information from several boreholes, about 17 m depth, on average. The bottom of the landfill reaches a maximum of 14.5 m depth.     

Platinum group element geochemistry of komatiites from the Alexo and Pyke Hill areas, Ontario, Canada

Thirty-three whole-rock drill core samples and thirteen olivine, chromite, and sulfide separates from three differentiated komatiite lava flows at Alexo and Pyke Hill, Canada, were analyzed for PGEs using the Carius tube digestion ID-ICP-MS technique. The emplaced lavas are Al-undepleted komatiites with ∼27% MgO derived by ∼50% partial melting of LILE-depleted Archean mantle. Major and minor element variations during and after emplacement were controlled by 30 to 50% fractionation of olivine Fo_93-94. The emplaced lavas are characterized by (Pd/Ir)_N = 4.0 to 4.6, (Os/Ir)_N = 1.07, and Os abundances of ∼2.3 ppb. Variations in PGE abundances within individual flows indicate that Os and Ir were compatible (bulk D_Os,Ir = 2.4-7.1) and that Pt and Pd were incompatible (bulk D_Pt,Pd < 0.2) during lava differentiation, whereas bulk D_Ru was close to unity. Analyses of cumulus olivine separates indicate that PGEs were incompatible in olivine (D_PGEs^Ol-Liq = 0.04-0.7). The bulk fractionation trends cannot be accounted for by fractionation of olivine alone, and require an unidentified Os-Ir-rich phase. The composition of the mantle source (Os = 3.9 ppb, Ir = 3.6 ppb, Ru = 5.4 ppb, Pt and Pd = 5.7 ppb) was constrained empirically for Ru, Pt, and Pd; the Os/Ir ratio was taken to be identical to that in the emplaced melt, and the Ru/Ir ratio was taken to be chondritic, so that the absolute IPGE abundances of the source were determined by Ru. This is the first estimate of the PGE composition of a mantle source derived from analyses of erupted lavas. The suprachondritic Pd/Ir and Os/Ir of the inferred Abitibi komatiite mantle source are similar to those in off-craton spinel lherzolites, orogenic massif lherzolites, and enstatite chondrites, and are considered to be an intrinsic mantle feature. Bulk partition coefficients for use in komatiite melting models derived from the source and emplaced melt compositions are: D_Os,Ir = 2.3, D_Ru = 1.0, D_Pt,Pd = 0.07. Ruthenium abundances are good indicators of absolute IPGE abundances in the mantle sources of komatiite melts with 26 to 29% MgO, as Ru fractionates very little during both high degrees of partial melting and lava differentiation.     

Sedimentology and palynology of the Calafate Formation (Maastrichtian), Austral Basin, Southern Patagonia, Argentina

The Calafate Formation crops out in south-western Santa Cruz Province, Argentina, and displays a stacking of asymmetrical coarsening–fining-upward cycles. These cycles are interpreted as the product of short-lived transgressive-regressive events in which the coarsening upward part represents sedimentary aggradation with a stable or decreasing sea level. Sedimentological and palynological analyses indicate nearshore marine conditions. Even though the existence of an estuary or incised valley cannot be determined, this is the most probable palaeogeographic model. Based on dinoflagellate cysts, the base of the section is considered to be not older than Maastrichtian. The presence of the oyster Ambigostrea clarae (Ihering) occurring together with the dinoflagellate cyst species Manumiella druggii (Stover) Bujak and Davies and Eisenackia circumtabulata Drugg in the middle part of the section indicates an age no older than late Maastrichtian. According to sedimentological data, deposits representing the Cretaceous–Palaeogene transition would have been eroded, which is confirmed by the presence of Grapnelispora loncochensis Papú. This megaspore is a consistent component of the Maastrichtian assemblages from Patagonia.