Geomorphic controls on floodplain sediment and soil organic carbon storage in a Scottish mountain river

River floodplains constitute an important element in the terrestrial sediment and organic carbon cycle and store variable amounts of carbon and sediment depending on a complex interplay of internal and external driving forces. Quantifying the storage in floodplains is crucial to understand their role in the sediment and carbon cascades. Unfortunately, quantitative data on floodplain storage are limited, especially at larger spatial scales. Rivers in the Scottish Highlands can provide a special case to study alluvial sediment and carbon dynamics because of the dominance of peatlands throughout the landscape, but the alluvial history of the region remains poorly understood. In this study, the floodplain sediment and soil organic carbon storage is quantified for the mountainous headwaters of the River Dee in eastern Scotland (663 km²), based on a coring dataset of 78 floodplain cross-sections. Whereas the mineral sediment storage is dominated by wandering gravel-bed river sections, most of the soil organic carbon storage can be found in anastomosing and meandering sections. The total storage for the Upper Dee catchment can be estimated at 5.2 Mt or 2306.5 Mg ha^-1 of mineral sediment and 0.7 Mt or 323.3 Mg C ha^-1 of soil organic carbon, which is in line with other studies on temperate river systems. Statistical analysis indicates that the storage is mostly related to the floodplain slope and the geomorphic floodplain type, which incorporates the characteristic stream power, channel morphology and the deposit type. Mapping of the geomorphic floodplain type using a simple classification scheme shows to be a powerful tool in studying the total storage and local variability of mineral sediment and soil organic carbon in floodplains. © 2019 John Wiley & Sons, Ltd.     

The New SCIAMACHY Reference Solar Spectral Irradiance and Its Validation

This paper describes a new reference solar spectrum retrieved from measurements of the satellite instrument SCIAMACHY in the wavelength region from \(0.24~\upmu\mbox{m}\) to \(2.4~\upmu\mbox{m}\) and its comparison with several other established solar reference spectra. The SCIAMACHY reference spectrum was recorded early in the mission before substantial optical degradation due to the harsh space environment sets in. The radiometric calibration of SCIAMACHY, applied in this study, includes a physical model of the scanner unit. Furthermore, SCIAMACHY’s internal white light source (WLS) is used to correct for on-ground to in-flight changes. The resultant calibrated solar spectrum from SCIAMACHY is in good agreement with several available solar spectral irradiance (SSI) references in the visible spectral range. Strong throughput losses due to detector icing in the near infrared (NIR) are now adequately accounted for. Nevertheless, a deficit with respect to the ATLAS-3 composite and SORCE/SIM SSI is observed in the NIR. However, the SCIAMACHY solar reference spectrum agrees well with the recently re-evaluated SOLAR/SOLSPEC-ISS and recent ground measurements taken at Mauna Loa in the NIR.     

Sedimentary fabric characterized by X-ray tomography: A case-study from tsunami deposits on the Marquesas Islands,French Polynesia

X-ray tomography is used to analyse the grain size and sedimentary fabric of two tsunami deposits in the Marquesas Islands (French Polynesia, Pacific Ocean) which are particularly exposed to trans-Pacific tsunamis. One site is located on the southern coast of Nuku Hiva Island (Hooumi) and the other one is on the southern coast of Hiva Oa Island (Tahauku). Results are compared with other techniques such as two-dimensional image analysis on bulk samples (particle analyser) and anisotropy of magnetic susceptibility. The sedimentary fabric is characterized through three-dimensional stacks of horizontal slices (following a vertical step of 2·5 mm along the cores), while grain-size distribution is estimated from two-dimensional vertical slices (following a step of 2 mm). Four types of fabric are distinguished: (a) moderate to high angle (15 to 75°); (b) bimodal low-angle (<15°); (c) low to high angle with at least two different orientations; and (d) dispersed fabric. The fabric geometry in a tsunami deposit is not only controlled by the characteristics of the flow itself (current strength, flow regime, etc.) but also sediment concentration, deposition rate and grain-size distribution. There is a notable correlation between unimodal high-angle fabric – type (a) – and finely-skewed grain-size distribution. The two tsunami deposits studied represent two different scenarios of inundation. As demonstrated here, X-ray tomography is an essential method for characterizing past tsunamis from their deposits. The method can be applied to many other types of sediments and sedimentary rocks.     

In vitro simulation of oxic/suboxic diagenesis in an estuarine fluid mud subjected to redox oscillations

Estuarine turbidity maxima (ETMs) are sites of intense mineralisation of land-derived particulate organic matter (OM), which occurs under oxic/suboxic oscillating conditions owing to repetitive sedimentation and resuspension cycles at tidal and neap-spring time scales. To investigate the biogeochemical processes involved in OM mineralisation in ETMs, an experimental set up was developed to simulate in vitro oxic/anoxic oscillations in turbid waters and to follow the short timescale changes in oxygen, carbon, nitrogen, and manganese concentration and speciation. We present here the results of a 27-day experiment (three oxic periods and two anoxic periods) with an estuarine fluid mud from the Gironde estuary. Time courses of chemical species throughout the experiment evidenced the occurrence of four distinct characteristic periods with very different properties. Steady oxic conditions were characterised by oxygen consumption rates between 10 and 40 μmol L⁻¹ h⁻¹, dissolved inorganic carbon (DIC) production of 9–12 μmol L⁻¹ h⁻¹, very low NH₄⁺ and Mn²⁺ concentrations, and constant NO₃⁻ production rates (0.4 - 0.7 μmol L⁻¹ h⁻¹) due to coupled ammonification and nitrification. The beginning of anoxic periods (24 h following oxic to anoxic switches) showed DIC production rates of 2.5–8.6 μmol L⁻¹ h⁻¹ and very fast NO₃⁻ consumption (5.6–6.3 μmol L⁻¹ h⁻¹) and NH₄⁺ production (1.4–1.5 μmol L⁻¹ h⁻¹). The latter rates were positively correlated to NO₃⁻ concentration and were apparently caused by the predominance of denitrification and dissimilatory nitrate reduction to ammonia. Steady anoxic periods were characterised by constant and low NO₃⁻ concentrations and DIC and NH₄⁺ productions of less than 1.3 and 0.1 μmol L⁻¹ h⁻¹, respectively. Mn²⁺ and CH₄ were produced at constant rates (respectively 0.3 and 0.015 μmol L⁻¹ h⁻¹) throughout the whole anoxic periods and in the presence of nitrate. Finally, reoxidation periods (24–36 h following anoxic to oxic switches) showed rapid NH₄⁺ and Mn²⁺ decreases to zero (1.6 and 0.8–2 μmol L⁻¹ h⁻¹, respectively) and very fast NO₃⁻ production (3 μmol L⁻¹ h⁻¹). This NO₃⁻ production, together with marked transient peaks of dissolved organic carbon a few hours after anoxic to oxic switches, suggested that particulate OM mineralisation was enhanced during these transient reoxidation periods. An analysis based on C and N mass balance suggested that redox oscillation on short time scales (day to week) enhanced OM mineralisation relative to both steady oxic and steady anoxic conditions, making ETMs efficient biogeochemical reactors for the mineralisation of refractory terrestrial OM at the land-sea interface.     

Improving resolution and accuracy of mean sea surface from kinematic GPS,Vanuatu subduction zone

Satellite altimetry provides an ocean mean sea surface (MSS) map with global coverage and overall excellent precision. However, in some areas, like the Vanuatu archipelago, the coverage and resolution of this tool are not sufficient to correctly map the short scale undulations of the sea surface, due to numerous islands and to strong lithospheric and mantle heterogeneities. New applications such as seafloor geodesy may require local mean surface representation with improved resolution in specific areas. We used sea surface height collected with kinematic GPS during three different cruises in 2004, 2006 and 2007 to reconstruct a homogeneous sea surface map around Santo Island, Vanuatu. We assess the accuracy of this GPS-derived local sea surface to 6–19 cm and evaluate the quality of existing altimetry and gravity-derived MSSs on the Vanuatu archipelago. Observed short scale undulations are interpreted as due to local geodynamics.     

Marine genetic resources: A review of scientific and commercial interest

Marine genetic resources both within and beyond national jurisdiction have been the focus of international negotiations in a range of forums in recent years. One recurrent theme throughout these discussions has been the absence of detailed information upon which policy responses to the emerging issue of the conservation and sustainable use of marine genetic resources (especially in areas beyond national jurisdiction) could be based. In an effort to address some of these knowledge gaps, this article examines the level and nature of scientific and commercial interest in marine genetic resources, including in areas beyond national jurisdiction. It also examines the changing perspectives of the scientific community in relation to the potential of marine genetic resources.     

An original method for characterizing internal waves

This study consisted in the characterization of internal waves in the south of the Strait of Messina (Italy). The observational data consisted in thermistor string profiles from the Coastal Ocean Acoustic Changes at High frequencies (COACH06) sea trial.An empirical orthogonal function analysis is applied to the data. The first two spatial empirical modes represent over 99% of the variability, and their corresponding time-dependent expansion coefficients take higher absolute values during internal wave events. In order to check how the expansion coefficients vary during an internal wave event, their time derivative, called here changing rates, are computed. It shows that each wave of an internal wave train is characterized by a double oscillation of the changing rates. At the front of the wave, both changing rates increase in absolute value with opposite sign, and then decrease to become null at the maximum amplitude of the wave. At the rear of the wave, the changing rates describe another period, again with opposite sign. This double oscillation can be used as a detector of internal waves, but it can also give information on the width of the wave, by measuring the length of the oscillation, as this information may sometimes be hard to read straight out of the data. When plotting the changing rates one versus another, the resulting scatter diagram puts on a butterfly shape that illustrates well this behaviour.     

Analysis of karst hydrodynamics through comparison of dissolved and suspended solids' transport

In karst systems, rain events often result in a decrease of the conductivity (a tracer of dissolved phase transport) and an increase in turbidity (a tracer of suspended solids transport) at wells and springs. This study shows that the comparison of suspended solids and solute transport by the coupled approach of $T\text{–}C$ curves (Turbidity–Conductivity) and autocorrelations gives evidence of the transport processes in the karst network and allows understanding the karst hydrodynamics. To cite this article: D. Valdes et al., C. R. Geoscience 337 (2005).     

Pollution au plomb dans la Savoie antique (II–IIIe s. apr. J.-C.) en relation avec une installation métallurgique de la cité de Vienne

In Lake Anterne (NW French Alps), the Roman period is characterised by a lead contamination more important than that of the 1970s, due to the use of leaded gasoline. The maximum of this contamination period has been varve-dated 220 AD, i.e., during the optimum of Roman civilization in the Alps. Crossing palaeoenvironmental and archaeological evidences points out the economic importance of the town of Passy for the City of Vienne and yields a new example of lead contamination due to local metallurgical activity rather than distant impact of the exploitation of the Spanish Rio Tinto mine. To cite this article: F. Arnaud et al., C. R. Geoscience 338 (2005).     

Energy conditions and inhomogeneities in the Universe

The so-called dominant energy condition and the strong energy condition (of singularity theorems) cannot be violated by the negative effective ‘pressure’ arising from the inhomogeneous distribution of matter in the Universe.