Study of a Prominence Eruption using PROBA2/SWAP and STEREO/EUVI Data

Observations of the early rise and propagation phases of solar eruptive prominences can provide clues about the forces acting on them through the behavior of their acceleration with height. We have analyzed such an event, observed on 13 April 2010 by SWAP on PROBA2 and EUVI on STEREO. A feature at the top of the erupting prominence was identified and tracked in images from the three spacecraft. The triangulation technique was used to derive the true direction of propagation of this feature. The reconstructed points were fitted with two mathematical models: i) a power-law polynomial function and ii) a cubic smoothing spline, in order to derive the accelerations. The first model is characterized by five degrees of freedom while the second one is characterized by ten degrees of freedom. The results show that the acceleration increases smoothly, and it is continuously increasing with height. We conclude that the prominence is not accelerated immediately by local reconnection, but rather is swept away as part of a large-scale relaxation of the coronal magnetic field.     

Large-Eddy Simulation of Coherent Flow Structures within a Cubical Canopy

Instantaneous flow structures “within” a cubical canopy are investigated via large-eddy simulation. The main topics of interest are, (1) large-scale coherent flow structures within a cubical canopy, (2) how the structures are coupled with the turbulent organized structures (TOS) above them, and (3) the classification and quantification of representative instantaneous flow patterns within a street canyon in relation to the coherent structures. We use a large numerical domain (2,560 m × 2,560 m × 1,710 m) with a fine spatial resolution (2.5 m), thereby simulating a complete daytime atmospheric boundary layer (ABL), as well as explicitly resolving a regular array of cubes (40 m in height) at the surface. A typical urban ABL is numerically modelled. In this situation, the constant heat supply from roof and floor surfaces sustains a convective mixed layer as a whole, but strong wind shear near the canopy top maintains the surface layer nearly neutral. The results reveal large coherent structures in both the velocity and temperature fields “within” the canopy layer. These structures are much larger than the cubes, and their shapes and locations are shown to be closely related to the TOS above them. We classify the instantaneous flow patterns in a cavity, specifically focusing on two characteristic flow patterns: flushing and cavity-eddy events. Flushing indicates a strong upward motion, while a cavity eddy is characterized by a dominant vortical motion within a single cavity. Flushing is clearly correlated with the TOS above, occurring frequently beneath low-momentum streaks. The instantaneous momentum and heat transport within and above a cavity due to flushing and cavity-eddy events are also quantified.     

Scintillometer Intercomparison Study—Continued

An earlier study by one of the authors reported significant differences of up to 21% in linear regression slopes between six Kipp & Zonen large-aperture scintillometers. In this note, the consistency of this increasingly popular instrument for measuring sensible heat fluxes at the km scale was quantified by comparing measurements from four Scintec boundary-layer scintillometers and one large-aperture scintillometer over nearly identical transects. The Kipp & Zonen instrument’s sensible heat fluxes were more than 20% larger than those from the Scintec instruments, while the difference in regression slopes amongst the Scintec instruments was 3% or less.     

Geochemistry of regional background aerosols in the Western Mediterranean

The chemical composition of regional background aerosols, and the time variability and sources in the Western Mediterranean are interpreted in this study. To this end 2002–2007 PM speciation data from an European Supersite for Atmospheric Aerosol Research (Montseny, MSY, located 40 km NNE of Barcelona in NE Spain) were evaluated, with these data being considered representative of regional background aerosols in the Western Mediterranean Basin. The mean PM₁₀, PM_2.5 and PM₁ levels at MSY during 2002–2007 were 16, 14 and 11 µg/m³, respectively. After compiling data on regional background PM speciation from Europe to compare our data, it is evidenced that the Western Mediterranean aerosol is characterised by higher concentrations of crustal material but lower levels of OM + EC and ammonium nitrate than at central European sites. Relatively high PM_2.5 concentrations due to the transport of anthropogenic aerosols (mostly carbonaceous and sulphate) from populated coastal areas were recorded, especially during winter anticyclonic episodes and summer midday PM highs (the latter associated with the transport of the breeze and the expansion of the mixing layer). Source apportionment analyses indicated that the major contributors to PM_2.5 and PM₁₀ were secondary sulphate, secondary nitrate and crustal material, whereas the higher load of the anthropogenic component in PM_2.5 reflects the influence of regional (traffic and industrial) emissions. Levels of mineral, sulphate, sea spray and carbonaceous aerosols were higher in summer, whereas nitrate levels and Cl/Na were higher in winter. A considerably high OC/EC ratio (14 in summer, 10 in winter) was detected, which could be due to a combination of high biogenic emissions of secondary organic aerosol, SOA precursors, ozone levels and insolation, and intensive recirculation of aged air masses. Compared with more locally derived crustal geological dusts, African dust intrusions introduce relatively quartz-poor but clay mineral-rich silicate PM, with more kaolinitic clays from central North Africa in summer, and more smectitic clays from NW Africa in spring.     

Paleolakes, paleofloods, and depressions in Aurorae and Ophir Plana, Mars: Connectivity of surface and subsurface hydrological systems

The plains of Aurorae and Ophir in the equatorial region of Mars display geomorphic evidence indicative of extensive but generally short-lived paleohydrological processes. Elaver Vallis in Aurorae Planum south of Ganges Chasma is an outflow channel system >180 km long, and here inferred to have formed by cataclysmic spillover flooding from a paleolake(s) contained in the Morella crater basin. Ganges Cavus is an enormous 5-km-deep depression of probable collapse origin located in the Morella basin. The fluid responsible for the infilling of the Morella basin likely emerged at least partially through Ganges Cavus or its incipient depression, and it may have been supplied also from small-scale springs in the basin. Similar paleohydrological processes are inferred also in Ophir Planum. It is reasonable to assume that water, sometimes sediment-laden and/or mixed with gases, was the responsible fluid for these phenomena although some of the observed features could be explained by non-aqueous processes such as volcanism. Water emergence may have occurred as consequences of ground ice melting or breaching of cryosphere to release water from the underlying hydrosphere. Dike intrusion is considered to be an important cause of formation for the cavi and smaller depressions in Aurorae and Ophir Plana, explaining also melting of ground ice or breaching of cryosphere. Alternatively, the depressions and crater basins may have been filled by regional groundwater table rising during the period(s) when cryosphere was absent or considerably thin. The large quantities of water necessary for explaining the paleohydrological processes in Aurorae and Ophir Plana could have been derived through crustal migration from the crust of higher plains in western Ophir Planum where water existed in confined aquifers or was produced by melting of ground ice due to magmatic heating or climatic shift, or from a paleolake in Candor Chasma further west.     

Three-Dimensional Reconstruction of Active Regions

The STEREO mission provides an unprecedented opportunity to reconstruct the 3D configuration of solar features. In this work, we combine SECCHI/EUVI data from both spacecraft by means of a local correlation tracking method. The technique allows an automatic (without user intervention) matching of pixels in both images. This information is then used to triangulate the 3D coordinates of each pixel. We use the method in order to reconstruct and analyze the 3D structure of active regions. In particular, we focus on the extraction of coronal loop heights, observed nearly simultaneously in the 171, 195 and 284 Å passbands. We compare the properties of loops in the different wavelengths and extract valuable information regarding their geometry. In particular, we demonstrate that some loops that look co-spatial in the 171 Å and 195 Å images have in fact different heights and thus occupy different volumes. Our results have important implications for multi-wavelength studies of coronal loops, especially for calculations using filter-ratio techniques.     

Trace element behavior in hydrothermal experiments: Implications for fluid processes at shallow depths in subduction zones

Chemical evaluation of fluids affected during progressive water-sediment interactions provides critical information regarding the role of slab dehydration and/or crustal recycling in subduction zones. To place some constraints on geochemical processes during sediment subduction, reactions between décollement sediments and synthetic NaCl-CaCl₂ solutions at 25–350°C and 800 bar were monitored in laboratory hydrothermal experiments using an autoclave apparatus. This is the first attempt in a single set of experiments to investigate the relative mobilities of many subduction zone volatiles and trace elements but, because of difficulties in conducting hydrothermal experiments on sediments at high P-T conditions, the experiments could only be designed for a shallow ( 10 km) depth. The experimental results demonstrate mobilization of volatiles (B and NH₄) and incompatible elements (As, Be, Cs, Li, Pb, Rb) in hydrothermal fluids at relatively low temperatures ( 300°C). In addition, a limited fractionation of light from heavy rare earth elements (REEs) occurs under hydrothermal conditions. On the other hand, the high field strength elements (HFSEs) Cr, Hf, Nb, Ta, Ti, and Zr are not mobile in the reacted fluids. The observed behavior of volatiles and trace elements in hydrothermal fluids is similar to the observed enrichment in As, B, Cs, Li, Pb, Rb, and light REEs and depletion in HFSEs in arc magmas relative to magmas derived directly from the upper mantle. Thus, our work suggests a link between relative mobilities of trace elements in hydrothermal fluids and deep arc magma generation in subduction zones. The experimental results are highly consistent with the proposal that the addition of subduction zone hydrous fluids to the subarc mantle, which has been depleted by previous melting events, can produce the unique characteristics of arc magmas. Moreover, the results suggest that deeply subducted sediments may no longer have the composition necessary to generate the other distinct characteristics, such as the B-δ¹¹ B and B-¹⁰Be systematics, of arc lavas. Finally, the mobilization of B, Cs, Pb, and light REEs relative to heavy REEs in the hydrothermal fluids fractionate the ratios of B/Be, B/Nb, Cs/Rb, Pb/Ce, La/Ba and LREE/HREE, which behave conservatively during normal magmatic processes. These results demonstrate that the composition of slab-derived fluids has great implications for the recycling of elements; not only in arc magmas but also in mantle plumes.     

Tholeiitic and alkalic basalts of the oldest Pacific Ocean crust

Approximately 160 Ma old basaltic lavas obtained from ODP Site 801 in the Pigafetta Basin represent the first Jurassic oceanic crust recovered in the Pacific Ocean and the oldest in situ oceanic crust discovered anywhere. The basement consists of an upper alkali olivine basalt sequence and a lower tholeiitic sequence separated by a yellow Fe-rich hydrothermal sedimentary deposit. The aphyric and sparsely plagiodase-olivine±spinel phyric tholeiites exhibit depleted, open–system fractionated characteristics with trace element abundances and Pb–Nd isotopic compositions similar to normal mid-ocean ridge basalts (N-MORB). The aphyric alkali basalts, although showing some overlap in isotopic composition with MORB, exhibit strong similarities in terms of incompatible element abundances to ocean island basalts (OIB). They could represent either OIB-type off-axis volcanism or an alkalic event possibly associated with the waning stages of spreading axis volcanism in the Pigafetta Basin. All lavas have undergone low-grade anoxic smectite–carbonate alteration, although flows underlying the Fe-rich sediments have suffered hydrothermal alteration and fracturing.