Variations in the atmospheric electric field and Meteorological parameters at a Tropical coastal urban station during 1936–40 and 1962–66

Summary The seasonal and diurnal variations in the vertical component of the atmospheric electric field, air temperature, relative humidity and horizontal wind speed were studied using the surface data for the two periods (1936–40) and (1962–66) recorded at the tropical urban station, Colaba, Bombay (18°51N, 72°49E, 11 m ASL), located on the west coast of India.The atmospheric electric field during the latter period (1962–66) is significantly higher (up to 42.3%) than the earlier period (1936–40). This has been attributed to the enhanced particulate concentrations in the atmosphere. The increase noticed in the atmospheric electric field is a maximum during winter and minimum during the monsoon. The atmospheric electric field exhibited a marked semi-diurnal oscillation with peaks at 0900 LST and 2200 LST during winter, premonsoon and post-monsoon seasons of both the periods. During the monsoon season the double oscillation is not marked.The variations noticed in the surface air temperature and the relative humidity are in agreement with those observed in the atmospheric electric field. The horizontal wind speed showed a decrease which has been attributed to the surface roughness resulting from urbanization.With 7 Figures     

Size segregated aerosol mass concentration measurements over the Arabian Sea during ICARB

Mass concentration and mass size distribution of total (composite) aerosols near the surface are essential inputs needed in developing aerosol models for radiative forcing estimation as well as to infer the environment and air quality. Using extensive measurements onboard the oceanographic research vessel, Sagar Kanya, during its cruise SK223B in the second phase of the ocean segment of the Integrated Campaign for Aerosols, gases and Radiation Budget (ICARB), the spatial distribution of the mass concentration and mass size distribution of near-surface aerosols are examined for the first time over the entire Arabian Sea, going as far as 58°E and 22°N, within a span of 26 days. In general, the mass concentrations (M _T ) were found to be low with the mean value for the entire Arabian Sea being 16.7 ± 7 μg m^?3; almost 1/2 of the values reported in some of the earlier campaigns. Coarse mode aerosols contributed, on an average, 58% to the total mass, even though at a few pockets accumulation mode contribution dominated. Spatially, significant variations were observed over central and northern Arabian Sea as well as close to the west coast of India. In central Arabian Sea, even though the M _T was quite low, contribution ofs accumulation aerosols to the total mass concentration was greater than 50%. Effective radius, a parameter important in determining scattering properties of aerosol size distribution, varied between 0.07 and 0.4 μm with a mean value of 0.2 μm. Number size distributions, deduced from the mass size distributions, were approximated to inverse power-law form and the size indices (ν) were estimated. It was found to vary in the range 3.9 to 4.2 with a mean value of 4.0 for the entire oceanic region. Extinction coefficients, estimated using the number-size distributions, were well-correlated with the accumulation mode mass concentration with a correlation coefficient of 0.82.     

Adsorption Characteristics of Rhodamine B from Aqueous Solution onto Baryte

Batch sorption experiments were carried out for the adsorption of the basic dye Rhodamine B from aqueous solution using baryte as the adsorbent. The effect of adsorbent dosage, temperature, initial dye concentration and pH were studied. Adsorption data were modeled using first and second order kinetic equations and the intra particle diffusion model. Kinetic studies showed that the adsorption process followed second order rate kinetics with an average rate constant of 0.05458 g mg^–1 min^–1. Dye adsorption equilibrium was attained rapidly after 30 min of contact time. The equilibrium data was fitted to the Langmuir, Freundlich and Tempkin isotherms over a dye concentration range of 50–250 mg/L. The adsorption thermodynamic parameters showed that adsorption was an exothermic, spontaneous and less ordered arrangement process. The adsorbent, baryte, was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The results showed that baryte has good potential for the removal of Rhodamine B from dilute aqueous solution.     

Modeling of aerosol induced snow albedo feedbacks over the Himalayas and its implications on regional climate

Climate Dynamics - Regional climate model (RegCM-4.6.0) coupled with Community Land Model (CLM4.5), which includes SNow, ICe and Aerosol Radiation (SNICAR) model was used to investigate the effect...     

The Variability of the Interannual Oscillations of the Indian Summer Monsoon Rainfall

A new method of analysis namely, Singular Spectrum Analysis (SSA) is applied to the Indian Summer Monsoon (June-September) Rainfall (ISMR) series. The method is efficient in extracting the statistically significant oscillations with periods 2.8 and 2.3 year from the white noise of the ISMR series. The study shows that 2.8 / 2.3 year cycle captures the variability of the ISMR related to Southern Oscillation / Quasi Biennial Oscillation. The temporal structure of these oscillations show that these are in phase in extreme (excess and drought) monsoon conditions as well as in El Nino Southern Oscillation (ENSO) years. Both these oscillations show minimum variability during the period 1920-1940 and there is an increasing trend in the variability of these oscillations in the recent decades. The study enables to obtain pure signal consisting of reconstructed time series using these two Oscillations, from the original white noise series.     

Measurement of atmospheric total ozone by the filter photometric method

The total ozone content in the atmosphere was determined from the multichannel photometer observations of direct solar radiation made in the urban environment at Pune (18° 32 N, 73° 51E, 559 m ASL) and Sinhagad hill station (18° 22N, 73° 45E, 1305 m ASL) during March 1980-February 1982. The total ozone content of the atmosphere was computed making use of the differential absorption of solar radiation due to ozone at 0.4 and 0.6 m wavelengths in the Chappuis band. The values of the ozone data obtained from the photometer observations at Pune and Sinhagad were compared with the corresponding ozone data obtained from the Dobson spectrophotometer located at Pune. Values of ozone obtained by the photometric method were found to be smaller by 8–18% than the Dobson values when Vigroux's absorption coefficients were used. Similarly, when the absorption coefficients of Inn and Tanaka (1953) were used, the ozone values obtained by the photometric method were smaller by 4–14% than the Dobson values. The ozone values at the hill station obtained from the photometric method were in better agreement (5%) with the Dobson values.     

Adsorption of Metal Ions onto the Chemically Modified Agricultural Waste

This paper discusses about the adsorption of metal ions such as Cu(II), Cd(II), Zn(II), and Ni(II) from aqueous solution by sulfuric acid treated cashew nut shell (STCNS). The adsorption process depends on the solution pH, adsorbent dose, contact time, initial metal ions concentration, and temperature. The adsorption kinetics was relatively fast and equilibrium was reached at 30 min. The adsorption equilibrium follows Langmuir adsorption isotherm model. The maximum adsorption capacity values of the modified cashew nut shell (CNS) for metal ions were 406.6 mg/g for Cu(II), 436.7 mg/g for Cd(II), 455.7 mg/g for Zn(II), and 456.3 mg/g for Ni(II). The thermodynamic study shows the adsorption of metal ions onto the STCNS was spontaneous and exothermic in nature. The kinetics of metal ions adsorption onto the STCNS followed a pseudo‐second‐order kinetic model. The external mass transfer controlled metal ions removal at the earlier stages and intraparticle diffusion at the later stages of adsorption. A Boyd kinetic plot confirms that the external mass transfer was the slowest step involved in the adsorption of metal ions onto the STCNS. A single‐stage batch adsorber was designed using the Langmuir adsorption isotherm equation.     

Geochemical assessment of a siliceous limestone sample for cement making

A low grade siliceous limestone sample from the Jayantipuram mine of Andhra Pradesh, India, has been investigated for its suitability for cement making. Petrological as well as X-ray diffraction pattern studies indicated that the limestone sample was crystalline and dominantly composed of calcite and quartz. They are simple in mineralogy, and yet they have variable silica and lime contents. Geochemical analysis results of twenty five hand picked samples indicated that the limestone from the Jayantipuram mine shows a wide range of variations in LOI (29.94% to 40.64%), SiO2 (6.14% to 27.18%), CaO (37.93% to 50.78%), Al2O3 (0.49% to 2.27%) and Fe2O3 (0.28% to 2.4%). MgO, K2O, Na2O, TiO2 and MnO2 are present in traces. CaO with LOI shows a strong positive correlation where as CaO with SiO2 shows a strong negative correlation because of mineralogical factors. The chemical composition of the limestone reflects its mineralogical composition. The distribution of various elements in the acid-soluble fraction has been studied by the factor analysis method in order to interpret in terms of their mineralogy, sedimentary environment and diagenesis. Mineralogy, recrystallization and other diagenetic changes are the main factors affecting the distribution of the elements and their mutual relationships in the limestone. The aim of this paper is also to analyze how significantly the two parameters, silica modulus and lime saturation factor, influence this low grade siliceous limestone sample from the Jayantipuram mine of Andhra Pradesh, India, for the cement making process from the geochemical data.     

Influence of circulation parameters on the AOD variations over the Bay of Bengal during ICARB

MODIS (Moderate Resolution Imaging Spectroradiometer) level-3 aerosol data, NCEP (National Centers for Environmental Prediction) reanalysis winds and QuikSCAT ocean surface winds were made use of to examine the role of atmospheric circulation in governing aerosol variations over the Bay of Bengal (BoB) during the first phase of the ICARB (Integrated Campaign for Aerosols, gases and Radiation Budget) campaign (March 18–April 12, 2006). An inter-comparison between MODIS level-3 aerosol optical depth (AOD) data and ship-borne MICROTOPS measurements showed good agreement with correlation 0.92 (p < 0.0001) and a mean MODIS underestimation by 0.01. During the study period, the AOD over BoB showed high values in the northern/north western regions, which reduced towards the central and southern BoB. The wind patterns in lower atmospheric layers (> 850 hPa) indicated that direct transport of aerosols from central India was inhibited by the presence of a high pressure and a divergence over BoB in the lower altitudes. On the other hand, in the upper atmospheric levels, winds from central and northern India stretched south eastwards and converged over BoB with a negative vorticity indicative of a downdraft. These wind patterns pointed to the possibility of aerosol transport from central India to BoB by upper level winds. This mechanism was further confirmed by the significant correlations that AOD variations over BoB showed with aerosol flux convergence and flux vorticity at upper atmospheric levels (600–500 hPa). AOD in central and southern BoB away from continental influences displayed an exponential dependence on the QuikSCAT measured ocean surface wind speed. This study shows that particles transported from central and northern India by upper atmospheric circulations as well as the marine aerosols generated by ocean surface winds contributed to the AOD over the BoB during the first phase of ICARB.     

Aircraft measurements of aerosol black carbon from a coastal location in the north-east part of peninsular India during ICARB

During the Integrated Campaign for Aerosols, gases and Radiation Budget (ICARB) over India, high-resolution airborne measurements of the altitude profiles of the mass concentrations (M_B) of aerosol black carbon (BC) were made off Bhubaneswar (BBR, 85.82°E, 20.25°N), over northwest Bay of Bengal, in the altitude region upto 3 km. Such high-resolution measurements of altitude profiles of aerosols are done for the first time over India. The profiles showed a near-steady vertical distribution of MB modulated with two small peaks, one at 800m and the other at ～2000m. High resolution GPS (Global Positioning System) sonde (Vaisala) measurements around the same region onboard the research vessel Sagar Kanya (around the same time of the aircraft sortie) revealed two convectively well mixed layers, one from ground to ～700m with an inversion at the top and the other extends from 1200m to ～2000m with a second inversion at ～2200m and a convectively stable region in the altitude range 700–1200m. The observed peaks in the M_B profile are found to be associated with these temperature inversions. In addition, long-range transport from the Indo-Gangetic Plain (IGP) and deserts lying further to the west also influence the vertical profile of BC. Latitudinal variation of MB showed a remarkable land ocean contrast at the 500m altitude (within the well mixed region) with remarkably lower values over oceans, suggesting the impact of strong sources over the mainland. However, above the ABL (at 1500m), the latitudinal variations were quite weak, and this appears to be resulting from the impact of long-range transport. Comparison of the altitude profiles of M_B over BoB off BBR with those obtained during the earlier occasion over the inland stations of Hyderabad and Kanpur showed similarities above ～500m, with M_B remaining around a steady value of ～1 μg m^?3. However, large differences are seen within the ABL. Even though the observed M_B values are not unusually high, their near constancy in the vertical column will have important implications to radiative forcing.