Nitrogen isotopes in the recent solar wind from the analysis of Genesis targets: Evidence for large scale isotope heterogeneity in the early solar system

We have analyzed nitrogen, neon and argon abundances and isotopic ratios in target material exposed in space for 27 months to solar wind (SW) irradiation during the Genesis mission. SW ions were extracted by sequential UV (193 nm) laser ablation of gold-plated material, purified separately in a dedicated line, and analyzed by gas source static mass spectrometry. We analyzed gold-covered stainless steel pieces from the Concentrator, a device that concentrated SW ions by a factor of up to 50. Despite extensive terrestrial N contamination, we could identify a non-terrestrial, ¹⁵N-depleted nitrogen end-member that points to a 40% depletion of ¹⁵N in solar-wind N relative to inner planets and meteorites, and define a composition for the present-day Sun (¹⁵N/¹⁴N = [2.26 ± 0.67] × 10⁻³, 2σ), which is indistinguishable from that of Jupiter’s atmosphere. These results indicate that the isotopic composition of nitrogen in the outer convective zone of the Sun has not changed through time, and is representative of the protosolar nebula. Large ¹⁵N enrichments due to e.g., irradiation, low temperature isotopic exchange, or contributions from ¹⁵N-rich presolar components, are therefore required to account for inner planet values.     

Numerical modeling of two-phase hysteresis combined with an interface condition for heterogeneous porous media

This paper presents a numerical implementation of two-phase capillary hysteresis and its combination with a capillary interface condition for the treatment of heterogeneities. The hysteresis concepts chosen in this work are first implemented in a node-centered FV discretization scheme and subsequently combined with the interface condition that predicts sharp saturation discontinuities at material interfaces, based on a pressure equilibrium concept. This approach allows for the approximation of history-dependent, and at the same time discontinuous, saturations at material interfaces. The resulting model provides a well-defined evolution of the hysteretic capillary pressure–saturation relationships at material interfaces that is independent of the grid spacing. As demonstrated with a simple 1-D example, this concept therefore offers the advantage that the solution of a two-phase flow problem involving hysteresis does not relate to the grid resolution at the material interfaces.     

The challenge of dating early pleistocene fossil teeth by the combined uranium series–electron spin resonance method: the Venta Micena palaeontological site (Orce,Spain)

The palaeontological site of Venta Micena (Orce, Andalusia, Spain) lies in the eastern sector of the Guadix–Baza basin, one of the best documented areas in Europe for Plio‐Pleistocene biostratigraphy. The combination of biochronological and palaeomagnetic results, combined with the radiometric data obtained for Atapuerca Sima del Elefante, indicated that the Venta Micena stratum was formed between the Jaramillo and Olduvai palaeomagnetic events, most likely between 1.22 and 1.77 Ma. Five fossil teeth from two outcrops (sites A and B) were selected to assess the potential of combined uranium series–electron spin resonance (US‐ESR) dating of Early Pleistocene sites. Although the US‐ESR results of the first outcrop showed a large scatter between the three teeth, the mean age of 1.37 ± 0.24 Ma can be considered a reasonable age estimate for Venta Micena. The mean ESR age of 0.62 ± 0.03 Ma obtained for site B seems to be a severe underestimation when compared with the independent age control. This underestimation is attributed to a relative recent U‐mobilization event that led to some U‐leaching. The results show that any ESR age calculations of old samples are extremely sensitive to variations in the measured ²³⁰Th/²³⁴U ratios in dental tissues. Although the results demonstrate that ESR can in principle be applied to Early Pleistocene sites, they also reveal the complexity of dating such old teeth. It is necessary to continue research in several directions, such as study of the behaviour of ESR signals in old teeth and understanding recent U‐mobilization processes, to improve the reliability of the combined US‐ESR dating method applied to Early Pleistocene times, a period for which the number of available numerical dating techniques is very limited. Copyright © 2011 John Wiley & Sons, Ltd.     

Northwest Africa 1500: Plagioclase‐bearing monomict ureilite or ungrouped achondrite?

Abstract— Northwest Africa (NWA) 1500 is an ultramafic meteorite dominated by coarse (?100–500 μm) olivine (95–96%), augite (2–3%), and chromite (0.6–1.6%) in an equilibrated texture. Plagioclase (0.7–1.8%) occurs as poikilitic grains (up to ?3 mm) in vein‐like areas that have concentrations of augite and minor orthopyroxene. Other phases are Cl‐apatite, metal, sulfide, and graphite. Olivine ranges from Fo 65–73, with a strong peak at Fo 68–69. Most grains are reversezoned, and also have ?10–30 μm reduction rims. In terms of its dominant mineralogy and texture, NWA 1500 resembles the majority of monomict ureilites. However, it is more ferroan than known ureilites (Fo ≥75) and other mineral compositional parameters are out of the ureilite range as well. Furthermore, neither apatite nor plagioclase have ever been observed, and chromite is rare in monomict ureilites. Nevertheless, this meteorite may be petrologically related to the rare augite‐bearing ureilites and represent a previously unsampled part of the ureilite parent body (UPB). The Mn/Mg ratio of its olivine and textural features of its pyroxenes are consistent with this interpretation. However, its petrogenesis differs from that of known augite‐bearing ureilites in that: 1) it formed under more oxidized conditions; 2) plagioclase appeared before orthopyroxene in its crystallization sequence; and 3) it equilibrated to significantly lower temperatures (800–1000 °C, from two‐pyroxene and olivine‐chromite thermometry). Formation under more oxidized conditions and the appearance of plagioclase before orthopyroxene could be explained if it formed at a greater depth on the UPB than previously sampled. However, its significantly different thermal history (compared to ureilites) may more plausibly be explained if it formed on a different parent body. This conclusion is consistent with its oxygen isotopic composition, which suggests that it is an ungrouped achondrite. Nevertheless, the parent body of NWA 1500 may have been compositionally and petrologically similar to the UPB, and may have had a similar differentiation history.     

The influence of Hall drift on the magnetic fields of neutron stars

We consider the evolution of magnetic fields under the influence of Hall drift and Ohmic decay. The governing equation is solved numerically, in a spherical shell with   r _i / r _o = 0.75  . Starting with simple free-decay modes as initial conditions, we then consider the subsequent evolution. The Hall effect induces so-called helicoidal oscillations, in which energy is redistributed among the different modes. We find that the amplitude of these oscillations can be quite substantial, with some of the higher harmonics becoming comparable with the original field. Nevertheless, this transfer of energy to the higher harmonics is not sufficient to accelerate significantly the decay of the original field, at least not at the   R _B = O (100)  parameter values accessible to us, where this Hall parameter   R _B   measures the ratio of the Ohmic time-scale to the Hall time-scale. We do find clear evidence though of increasingly fine structures developing for increasingly large   R _B   , suggesting that perhaps this Hall-induced cascade to ever-shorter length-scales is eventually sufficiently vigorous to enhance the decay of the original field. Finally, the implications for the evolution of neutron star magnetic fields are discussed.     

The effect of long-term low-temperature exposure on apatite fission track stability: A natural annealing experiment in the deep ocean

Since studies on deep-sea cores were carried out in the early 1990s it has been known that ambient temperature may have a marked affect on apatite fission track annealing. Due to sluggish annealing kinetics, this effect cannot be quantified by laboratory annealing experiments. The unknown amount of low-temperature annealing remains one of the main uncertainties for extracting thermal histories from fission track data, particularly for samples which experienced slow cooling in shallow crustal levels. To further elucidate these uncertainties, we studied volcanogenic sediments from five deep-sea drill cores, that were exposed to maximum temperatures between ∼10° and 70 °C over geological time scales of ∼15-120 Ma. Mean track lengths (MTL) and etch pit diameters (Dpar) of all samples were measured, and the chemical composition of each grain analysed for age and track length measurements was determined by electron microprobe analysis. Thermal histories of the sampled sites were independently reconstructed, based on vitrinite reflectance measurements and/or 1D numerical modelling. These reconstructions were used to test the most widely used annealing models for their ability to predict low-temperature annealing. Our results show that long-term exposure to temperatures below the temperature range of the nominal apatite fission track partial annealing zone results in track shortening ranging between 4 and 11%. Both chlorine content and Dpar values explain the downhole annealing patterns equally well. Low chlorine apatite from one drill core revealed a systematic relation between Si-content and Dpar value. The question whether Si-substitution in apatite has direct and systematic effects on annealing properties however, cannot be addressed by our data. For samples, which remained at temperatures <30 °C, and which are low in chlorine, the Laslett et al. [Laslett G., Green P., Duddy I. and Gleadow A. (1987) Thermal annealing of fission tracks in apatite. Chem. Geol. 65, 1-13] annealing model predicts MTL up to 0.6 μm longer than those actually measured, whereas for apatites with intermediate to high chlorine content, which experienced temperatures >30 °C, the predictions of the Laslett et al. (1987) model agree with the measured MTL data within error levels. With few exceptions, predictions by the Ketcham et al. [Ketcham R., Donelick R. and Carlson W. (1999) Variability of apatite fission-track annealing kinetics. III: Extrapolation to geological time scales. Am. Mineral. 84/9, 1235-1255] annealing model are consistent with the measured data for samples which remained at temperatures below ∼30 °C. For samples which experienced maximum temperatures between ∼30 and 70 °C, and which are rich in chlorine, the Ketcham et al. (1999) model overestimates track annealing.     

IR calibrations for water determination in olivine,r-GeO<Subscript>2</Subscript>, and SiO<Subscript>2</Subscript> polymorphs

Mineral-specific IR absorption coefficients were calculated for natural and synthetic olivine, SiO₂ polymorphs, and GeO₂ with specific isolated OH point defects using quantitative data from independent techniques such as proton–proton scattering, confocal Raman spectroscopy, and secondary ion mass spectrometry. Moreover, we present a routine to detect OH traces in anisotropic minerals using Raman spectroscopy combined with the “Comparator Technique”. In case of olivine and the SiO₂ system, it turns out that the magnitude of ε for one structure is independent of the type of OH point defect and therewith the peak position (quartz ε = 89,000 ± 15,000  \textl \textmol_{\textH2\textO}^-1 \textcm^-2\text{l}\,\text{mol}_{{\text{H}_2}\text{O}}^{-1}\,\text{cm}^{-2}), but it varies as a function of structure (coesite ε = 214,000 ± 14,000  \textl \textmol_{\textH2\textO}^-1 \textcm^-2\text{l}\,\text{mol}_{{\text{H}_2}\text{O}}^{-1}\,\text{cm}^{-2}; stishovite ε = 485,000 ± 109,000  \textl \textmol_{\textH2\textO}^-1 \textcm^-2\text{l}\,\text{mol}_{{\text{H}_2}\text{O}}^{-1}\,\text{cm}^{-2}). Evaluation of data from this study confirms that not using mineral-specific IR calibrations for the OH quantification in nominally anhydrous minerals leads to inaccurate estimations of OH concentrations, which constitute the basis for modeling the Earth’s deep water cycle.     

Automatic Representation of Geographical Data from a Semantic Point of View through a New Ontology and Classification Techniques

Providing Geographical Information Systems with mechanisms for processing geo‐data based on their semantics may help to solve problems like heterogeneity. This is because GIS could process geo‐data focusing on their meaning and not on their syntax and/or structure. An important aspect for achieving these objectives is the establishment of an automatic means of correspondence between geo‐data and their conceptualization in Higher Levels Ontologies (HLO). In this article, a new type of Ontology is proposed (Data‐Representation Ontology (DRO)). This Ontology describes the semantic embedded in geo‐data, which cannot be represented in current types of Ontologies. Across this Ontology, heterogeneous geographical data can be integrated in the semantic space contributing positively to the development of solutions for the problems of interoperability between heterogeneous systems. Likewise, we propose a new method for the automatic generation of the DRO and its interrelationships with HLO, based on pattern classification techniques. The experiments show that once the DRO is generated, the classifier can classify all data correctly. Thus, these data are semantically enriched. Moreover, this article shows how the topological relationships can enrich the semantics in the generated Ontology and increase the effectiveness of spatial analysis.     

Spectrometric analyses in comparison to the physiological condition of heavy metal stressed floodplain vegetation in a standardised experiment

Floodplain ecosystems are affected by flood dynamics, nutrient supply as well as anthropogenic activities. Heavy metal pollution poses a serious environmental challenge. Pollution transfer from the soil to vegetation is still present at the central location of Elbe River, Germany. The goal of this study was to assess and separate the current heavy metal contamination of the floodplain ecosystem, using spectrometric field and laboratory measurements. A standardized pot experiment with floodplain vegetation in differently contaminated soils provided the basis for the measurements. The dominant plant types of the floodplains are: Urtica dioica, Phalaris arundinacea and Alopecurus pratensis, these were also chemically analysed. Various vegetation indices and methods were used to estimate the red edge position, to normalise the spectral curve of the vegetation and to investigate the potential of different methods for separating plant stress in floodplain vegetation. The main task was to compare spectral bands during phenological phases to find a method to detect heavy metal stress in plants. A multi-level algorithm for the curve parameterisation was developed. Chemo-analytical and ecophysiological parameters of plants were considered in the results and correlated with spectral data. The results of this study show the influence of heavy metals on the spectral characteristics of the focal plants. The developed method (depth CR1730) showed significant relationship between the plants and the contamination.