Quaternary coastline evolution of Lake Ohrid (Macedonia/Albania)

Lake Ohrid (between FYR of Macedonia and Albania), situated in an active tectonic region of the Balkanides, is characterized by N ?? S trending active faults. To reconstruct the Holocene shoreline evolution we investigated the coastline using sediment cores and geophysical methods to image sedimentary and tectonic structures. We revealed areas of differing sedimentation regimes. The plains north and south of the lake are dominated by clastic input related to climate variations and uplift/erosion, whereas the steep western and eastern margins are controlled by recent tectonics. Furthermore, no evidence for a much higher lake-level during the Holocene was found in the plains north and south of the lake, except rare temporary floodings. This is supported by mappings of the limestone cliffs around Lake Ohrid, which yielded no evidence for abrasional platforms or notches as indicators for past highstands.     

Parameterization of wind turbine impacts on hydrodynamics and sediment transport

Monopile foundations of offshore wind turbines modify the hydrodynamics and sediment transport at local and regional scales. The aim of this work is to assess these modifications and to parameterize them in a regional model. In the present study, this is achieved through a regional circulation model, coupled with a sediment transport module, using two approaches. One approach is to explicitly model the monopiles in the mesh as dry cells, and the other is to parameterize them by adding a drag force term to the momentum and turbulence equations. Idealised cases are run using hydrodynamical conditions and sediment grain sizes typical from the area located off Courseulles-sur-Mer (Normandy, France), where an offshore windfarm is under planning, to assess the capacity of the model to reproduce the effect of the monopile on the environment. Then, the model is applied to a real configuration on an area including the future offshore windfarm of Courseulles-sur-Mer. Four monopiles are represented in the model using both approaches, and modifications of the hydrodynamics and sediment transport are assessed over a tidal cycle. In relation to local hydrodynamic effects, it is observed that currents increase at the side of the monopile and decrease in front of and downstream of the monopile. In relation to sediment transport effect, the results show that resuspension and erosion occur around the monopile in locations where the current speed increases due to the monopile presence, and sediments deposit downstream where the bed shear stress is lower. During the tidal cycle, wakes downstream of the monopile reach the following monopile and modify the velocity magnitude and suspended sediment concentration patterns around the second monopile.     

Experimental study of ERT monitoring ability to measure solute dispersion

This paper reports experimental measurements performed to test the ability of electrical resistivity tomography (ERT) imaging to provide quantitative information about transport parameters in porous media such as the dispersivity α, the mixing front velocity u, and the retardation factor R(f) associated with the sorption or trapping of the tracers in the pore structure. The flow experiments are performed in a homogeneous porous column placed between two vertical set of electrodes. Ionic and dyed tracers are injected from the bottom of the porous media over its full width. Under such condition, the mixing front is homogeneous in the transverse direction and shows an S-shape variation in the flow direction. The transport parameters are inferred from the variation of the concentration curves and are compared with data obtained from video analysis of the dyed tracer front. The variations of the transport parameters obtained from an inversion performed by the Gauss-Newton method applied on smoothness-constrained least-squares are studied in detail. While u and R(f) show a relatively small dependence on the inversion procedure, α is strongly dependent on the choice of the inversion parameters. Comparison with the video observations allows for the optimization of the parameters; these parameters are found to be robust with respect to changes in the flow condition and conductivity contrast.     

Geodynamic evolution of the Tethyan lithosphere as recorded in the Spontang Ophiolite,South Ladakh ophiolites(NW Himalaya,India)

The Spontang Ophiolite complex represents the most complete ophiolite sequence amongst the South Ladakh ophiolites and comprises mantle rocks(depleted harzburgites,dunites and minor lherzolites)as well as crustal rocks(basalt,isotropic gabbros,layered gabbros etc.).In the present study,detailed geochemistry(whole rock as well as mineral chemistry)and Sr-Nd isotopic analyses of thirty-six ultramaficmafic samples have been attempted to constraint the evolution and petrogenetic history of the Tethyan oceanic crust.Major,trace-element and REE patterns of the peridotites and their minerals indicate that the lherzolites experienced lower degrees of partial melting resembling abyssal peridotites(at higher temperatures,TREE=$1216℃)than the harzburgites(6%–8%versus 15%–17%).Elevated eNd(t)and variable⁸⁷ Sr/⁸⁶ Sr(t)ratios along with REE patterns suggest that the Spontang mafic rocks display N-MORB affinity with negligible participation of oceanic sediments in their genesis are originated from a depleted upper mantle with little contribution from subduction-related fluids.MORB-type Neotethyan oceanic crust is associated with the earliest phase of subduction(of older Jurassic age)through which a younger intra-oceanic island arc(Spong arc)subsequently developed.Harzburgites REE display typical U-shaped patterns,suggesting that these rocks have been metasomatized by LREE-enriched fluids.On the other side,mafic rocks are characterized by heterogeneous(Nb/La)PMand(Hf/Sm)PMand relatively homogeneous eNd(t),indicating interaction of subduction-related melts with the upper mantle during the initiation of subduction,in Early Cretaceous times.     

Petrography,mineralogy, and geochemistry of lunar meteorite Sayh al Uhaymir 300

Abstract— We report here the petrography, mineralogy, and geochemistry of lunar meteorite Sayh al Uhaymir 300 (SaU 300). SaU 300 is dominated by a fine‐grained crystalline matrix surrounding mineral fragments (plagioclase, pyroxene, olivine, and ilmenite) and lithic clasts (mainly feldspathic to noritic). Mare basalt and KREEPy rocks are absent. Glass melt veins and impact melts are present, indicating that the rock has been subjected to a second impact event. FeNi metal and troilite grains were observed in the matrix. Major element concentrations of SaU 300 (Al₂O₃ 21.6 wt% and FeO 8.16 wt%) are very similar to those of two basalt‐bearing feldspathic regolith breccias: Calcalong Creek and Yamato (Y‐) 983885. However, the rare earth element (REE) abundances and pattern of SaU 300 resemble the patterns of feldspathic highlands meteorites (e.g., Queen Alexandra Range (QUE) 93069 and Dar al Gani (DaG) 400), and the average lunar highlands crust. It has a relatively LREE‐enriched (7 to 10 x CI) pattern with a positive Eu anomaly (?11 x CI). Values of Fe/Mn ratios of olivine, pyroxene, and the bulk sample are essentially consistent with a lunar origin. SaU 300 also contains high siderophile abundances with a chondritic Ni/Ir ratio. SaU 300 has experienced moderate terrestrial weathering as its bulk Sr concentration is elevated compared to other lunar meteorites and Apollo and Luna samples. Mineral chemistry and trace element abundances of SaU 300 fall within the ranges of lunar feldspathic meteorites and FAN rocks. SaU 300 is a feldspathic impact‐melt breccia predominantly composed of feldspathic highlands rocks with a small amount of mafic component. With a bulk Mg# of 0.67, it is the most mafic of the feldspathic meteorites and represents a lunar surface composition distinct from any other known lunar meteorites. On the basis of its low Th concentration (0.46 ppm) and its lack of KREEPy and mare basaltic components, the source region of SaU 300 could have been within a highland terrain, a great distance from the Imbrium impact basin, probably on the far side of the Moon.     

Estimating the impact parameters of cosmic dust particles using a piezoelectric lead zirconate titanate detector

A cosmic dust detector for installation on a satellite is currently being developed using piezoelectric lead zirconate titanate (PZT), which can possess both functions of the collector and the transducer. The characteristics of the PZT detector have been studied by bombarding it with hypervelocity particles supplied by a Van de Graaff accelerator. The front surface of the detector used in this study was covered with a white paint to reduce any increase in the temperature due to the solar radiation. There was a linear relationship between the rise time of the signal produced by the detector and the particle's velocities, which were above 10 km/s on impact. This implies that individual particle velocities on impact can be inferred through the empirical formula derived from the data obtained from the PZT detector.     

No evidence for thermogenic methane release in coal from the Karoo-Ferrar large igneous province

The Early Jurassic Toarcian oceanic anoxic event (T-OAE) and concurrent negative carbon-isotope (δ¹³C) excursion have recently been attributed to either the release of methane (CH₄) clathrates or thermogenic CH₄ gas associated with the Karoo-Ferrar large igneous province (LIP) into coals and organic-rich shales. ¹²C-enriched thermogenic CH₄ production associated with the Karoo-Ferrar would result in residual material being ¹²C-depleted nearer the intrusions. In this study, geochemical analyses (carbon isotopes, volatile matter (VM), vitrinite reflectance (R_o)) are reported for two coal transects associated with dykes intruding the No. 4L coal in the Highveld Coalfield, Karoo Basin, South Africa. VM decreases from over 35% to around 15% in one transect, and the second transect shows a less pronounced decrease (from > 25% to ~ 16%). Accompanying the decrease in VM content is an increase in R_o from background levels of around 0.7% to over 4% adjacent to the dyke; used as a palaeo-geothermometer, R_o values indicate background temperatures of ~ 100 °C increasing to > 300 °C close to the contact. Despite changes in VM and R_o, there are no significant changes in δ¹³C, certainly not of the magnitude that would be expected associated with large-scale thermogenic CH₄ generation. These and other Gondwanan coals have low vitrinite and liptinite contents (components more prone to CH₄ generation), in part explaining the modest decreases in VM adjacent to the dykes. This, combined with the relatively narrow metamorphic aureole surrounding the intrusions and the likelihood that at least some of the volatiles generated by the intrusion were trapped as coalbed CH₄ or condensed as pyrolytic carbon, suggests only limited CH₄ release. In addition, based on original estimates of moisture contents in these coals and the depth at time of intrusion (1,000–2,000 m) the dykes would have lost most of their energy heating and evaporating water, thus having very little remaining energy to generate thermogenic CH₄.     

Truncated plurigaussian simulations to characterize aquifer heterogeneity

Integrating geological concepts, such as relative positions and proportions of the different lithofacies, is of highest importance in order to render realistic geological patterns. The truncated plurigaussian simulation method provides a way of using both local and conceptual geological information to infer the distributions of the facies and then those of hydraulic parameters. The method ( Le Loc'h and Galli 1994 ) is based on the idea of truncating at least two underlying multi-Gaussian simulations in order to create maps of categorical variable. In this article, we show how this technique can be used to assess contaminant migration in highly heterogeneous media. We illustrate its application on the biggest contaminated site of Switzerland. It consists of a contaminant plume located in the lower fresh water Molasse on the western Swiss Plateau. The highly heterogeneous character of this formation calls for efficient stochastic methods in order to characterize transport processes.