Crustal Melting in the Cordilleran Interior: The Mid-Cretaceous White Creek Batholith in the Southern Canadian Cordillera

The mid-Cretaceous White Creek batholith in southeast BritishColumbia is a zoned pluton ranging from quartz monzodioriteon the margin, to hornblende-and biotite-bearing granodioritetowards the interior of the batholith, which are in turn crosscutby two-mica granite. This range in rock type is similar to therange displayed by Mesozoic granitoid suites found in the Cordilleraninterior of western North America. The lithological zones inthe White Creek batholith correlate with distinet jumps in majorelement, trace element, and isotopic compositions, and indicatethat several pulses of magma were emplaced within the WhiteCreek magma chamber. The hornblende-and biotite-bearing granitoidsare metaluminous to weakly peraluminous, have strong light rareearth element (LREE) enrichment, and small negative Eu anomalies.These granitoids have initial _Sr ranging from +32 to +84 (⁸⁷Sr/⁸⁶SrTfrom 0.7069 to 0.7106), initial _Nd ranging from –5 to–10, and initial ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pbranging from 18.3 to 18.7, 15.58 to 15.65, and 38.3 to 39.0,respectively. The two-mica granites and associated aplites arestrongly peraluminous, and show only moderate LREE enrichmentand strong negative Eu anomalies. These granites have _Sr rangingfrom +174 to + 436 (⁸⁷Sr/⁸⁶Sr_T from 0.7169 to 0.7354), _Nd rangingfrom –12 to –16, and more radiogenic initial Pbisotope ratios than the hornblende-and biotite-bearing granitoids. Oxygen, Sr, Pb, and Nd isotopes, REE modelling, and phase equilibriumconstraints are consistent with crustal anatexis of Precambrianbasement gneisses and Proterozoic metapelites exposed in southeastBritish Columbia, the product being the hornblende-biotite granitoidsand two-mica granites, respectively. The sequence of intrusionin the White Creek batholith constrains the melting sequence.A zone of anatexis proceeded upwards through the crust, firstmelting basement gneisses then melting overlying metapelites.A model for basaltic magmatic underplating as a primary causeof anatexis of the crust during the mid-Cretaceous magmaticepisode is difficult to reconcile with the absence of earlyCretaceous basalt in the southern Canadian Cordillera. A muchmore likely petrogenetic model is that crustal anatexis wasprobably a response to crustal thickening in association withterrane accretion and collision along the western margin ofthe North American continent.     

Chronology of the high-pressure metamorphism of Norwegian garnet peridotites/pyroxenites

Eclogite facies mineral assemblages are variably preserved in mafic and ultramafic rocks within the Western Gneiss Region (WGR) of Norway. Mineralogical and microstructural data indicate that some Mg–Cr-rich, Alpine-type peridotites have had a complex metamorphic history. The metamorphic evolution of these rocks has been described in terms of a seven-stage evolutionary model; each stage is characterized by a specific mineral assemblage. Stages II and III both comprise garnet-bearing mineral assemblages. Garnet-bearing assemblages are also present in Fe–Ti-rich peridotites which commonly occur as layers in mafic complexes. Sm–Nd isotopic results are reported for mineral and whole rock samples from both of these types of peridotites and related rocks. The partitioning of Sm and Nd between coexisting garnet and clinopyroxene is used to assess chemical equilibrium. One sample of Mg–Cr-type peridotite shows non-disturbed partitioning of Sm and Nd between Stage II garnet and clinopyroxene pairs and yields a garnet–clinopyroxene–whole-rock date of 1703 ± 29 Ma (I= 0.51069, MSWD = 0.04). This is the best estimate for the age of the Stage II high-P assemblage. Other Stage II garnet–clinopyroxene pairs reflect later disturbance of the Sm–Nd system and yield dates in the range 1303 to 1040 Ma. These dates may not have any geological significance. Stage III garnet–clinopyroxene pairs typically have equilibrated Sm–Nd partitioning and two samples yield dates of 437 ± 58 and 511 ± 18 Ma. This suggests that equilibration of the Stage III high-P assemblage is related to the Caledonian orogeny and is more or less contemporaneous with high-P metamorphism of ‘country-rock’eclogites in the surrounding gneisses. The Sm–Nd mineral data for the Fe–Ti-rich garnet peridotites and for a superferrian eclogite, which occurs as a dyke within the Gurskebotn Mg–Cr-type peridotite, are consistent with a Palaeozoic high-P metamorphism. Finally a synoptic P–T–t path is proposed for the Mg–Cr-type peridotites which is consistent with the petrological and geochronological data.     

Cotton yield prediction through spectral parameters

To predict the crop yield from spectral parameters, a field experiment was conducted on cotton crop during 1997-98 Kharif season on a sandy loam soil at the Punjab Agricultural Unjversity, Ludhiana. India. Spectral reflectance and agronomic measurements were made for cotton species (American and Desi cotton), sown on two dates (May 1 and May 29) under five nitrogen levels (0, 40, 80, 120 and 160 kg/ha). Regression analysis showed that growth variables had poor correlation with seed cotton yield for all three models, however, yield attributes were significantly and highly correlated for second degree model with seed cotton yield. The integrated Radiance Ratio (RR) and Normalized Difference Vegetation Index (NDVI) measured over time were significantly correlated quadratically with seed cotton yield on three time segment periods viz., 81–110, 111–140 and 141–200 DAS, but highest correlation values were obtained during 81–110 DAS, In American cotton, the highest correlation coefficient for RR and NDVI were 0.91 and 0.81, respectively; whereas for Desi cotton these values were 0.88 and 0.84, respectively.     

The One-Way Wave Equation: A Full-Waveform Tool for Modeling Seismic Body Wave Phenomena

The study of seismic body waves is an integral aspect in global, exploration and engineering scale seismology, where the forward modeling of waves is an essential component in seismic interpretation. Forward modeling represents the kernel of both migration and inversion algorithms as the Green’s function for wavefield propagation and is also an important diagnostic tool that provides insight into the physics of wave propagation and a means of testing hypotheses inferred from observational data. This paper introduces the one-way wave equation method for modeling seismic wave phenomena and specifically focuses on the so-called operator-root one-way wave equations. To provide some motivation for this approach, this review first summarizes the various approaches in deriving one-way approximations and subsequently discusses several alternative matrix narrow-angle and wide-angle formulations. To demonstrate the key strengths of the one-way approach, results from waveform simulation for global scale shear-wave splitting modeling, reservoir-scale frequency-dependent shear-wave splitting modeling and acoustic waveform modeling in random heterogeneous media are shown. These results highlight the main feature of the one-way wave equation approach in terms of its ability to model gradual vector (for the elastic case) and scalar (for the acoustic case) waveform evolution along the underlying wavefront. Although not strictly an exact solution, the one-way wave equation shows significant advantages (e.g., computational efficiency) for a range of transmitted wave three-dimensional global, exploration and engineering scale applications.     

Climate change and infectious diseases: Can we meet the needs for better prediction?

The next generation of climate-driven, disease prediction models will most likely require a mechanistically based, dynamical framework that parameterizes key processes at a variety of locations. Over the next two decades, consensus climate predictions make it possible to produce forecasts for a number of important infectious diseases that are largely independent of the uncertainty of longer-term emissions scenarios. In particular, the role of climate in the modulation of seasonal disease transmission needs to be unravelled from the complex dynamics resulting from the interaction of transmission with herd immunity and intervention measures that depend upon previous burdens of infection. Progress is also needed to solve the mismatch between climate projections and disease projections at the scale of public health interventions. In the time horizon of seasons to years, early warning systems should benefit from current developments on multi-model ensemble climate prediction systems, particularly in areas where high skill levels of climate models coincide with regions where large epidemics take place. A better understanding of the role of climate extremes on infectious diseases is urgently needed.     

Characteristics of magnetic and non-magnetic lag in the Cobar area, NSW

Geochemical patterns from two lag anomalies in the Cobar region of central New South Wales are described. The region is semi-arid, deeply weathered and some areas are covered by variable thicknesses of aeolian and alluvial transported overburden.Lag morphology and mineralogy are related to landform. In erosional landforms the surface is covered by lag, which is composed of coarse fragments derived locally from bedrock and displays varying degrees of ferruginization, together with a range of secondary pisoids. In depositional landforms the lag is less abundant and contains more pisoids. Deflation by sheetwash may lead to lag being partially buried by alluvium. In a large proportion of pisoid lag, hematite and goethite have been converted to maghemite, allowing ready separation into magnetic and non-magnetic fractions. The non-magnetic fraction is dominated by the lithic lag whereas the magnetic fraction is dominated by pisoid lag.The magnetic and non-magnetic components of the 2–11 mm lag fraction, milled to < 75 μm and subjected to HF-HNO₃-HClO₄ attack, give rise to distinct geochemical patterns at targets related to a variant of the Cobar style of Pb-Zn mineralization with variable silicification and to Zn mineralization in a swarm of quartz and carbonate veinlets. The patterns are influenced by metal source, lag type, surface chemical conditions and landtbrm. Differences in the correlation between metal contents in the magnetic and non-magnetic lag components, and between trace elements and Fe. indicate variable loss of Cu and Zn from the magnetic lag at some targets but retention of Pb. The presence of a readily cxtractable base metal component in the lag has implications for detecting anomalies in transported cover in the region.     

Adsorption of hexavalent chromium onto activated carbon derived from <Emphasis Type="Italic">Leucaena leucocephala</Emphasis> waste sawdust: kinetics,equilibrium and thermodynamics

The adsorptive removal of Cr(VI) was studied using activated carbon derived from Leucaena leucocephala (ACLL). The physico-chemical properties of ACLL were determined using proximate analysis and N₂ BET surface area analysis. The N₂ BET surface area of ACLL was determined to be 1131 m² g^?1. The point of zero charge (pH_pzc) of 5.42 indicated that ACLL surface was positively charged for pH below the pH_PZC, attracting anions. The effect of experimental operating parameters such as time of contact, ACLL dose, pH, initial concentration and temperature was investigated. The optimum values of parameters such as concentration of 100 mg L^?1, 300 mg of ACLL dose, time of contact of 60 min, pH of 4 indicated the maximum Cr(VI) uptake of 13.85 mg g^?1. The pseudo-second-order kinetic model best fitted with the Cr(VI) adsorption data. Adsorptive removal of Cr(VI) onto ACLL satisfactorily fitted in the order of Redlich–Peterson > Freundlich > Langmuir > Temkin adsorption isotherm model. The thermodynamic parameters showed the adsorption of Cr(VI) onto ACLL was an endothermic and spontaneously occurred process.