Coastal Upwelling Activity on the Pacific Shelf of the Baja California Peninsula

High primary productivity on the Pacific coast of the Baja California Peninsula is usually related to coastal upwelling activity that injects nutrients into the euphotic zone in response to prevailing longshore winds (from the northwest to north). The upwelling process has maximum intensity from April to June, with the coastal upwelling index varying from 50 to 300 m³/s per 100 m of coastline. Along the entire coast of the peninsula, the upwelling intensity changes in accordance with local wind conditions and bottom topography. Spatial variability can also be modulated by the influence of mesoscale meanders of the California Current. We have identified the seasonal and synoptic variability of upwelling signatures on the Baja California shelf, using averaged monthly and weekly sea surface temperature (SST) distributions obtained from remote sensing imagery from the Advanced Very High Resolution Radiometer in the period from 1996 to 2001. Analysis of SST distribution and direct experimental data on temperature and nutrient concentration shows that the areas with the coldest SST anomalies were closely related to the bottom slope, shelf width, and coastline orientation relating to wind direction. We also assume that the nutrient transport into the coastal lagoons may be forced by the coupling of coastal upwelling and tidal pumping of surface waters into the lagoon system. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of Rhodolith-Forming Species and Growth-Form on Associated Fauna of Rhodolith Beds in the Central-West Gulf of California, México

Abstract.  Rhodoliths provide a stable and three-dimensional habitat to which other seaweeds and invertebrates can attach. Although ecological factors affecting rhodolith beds have been studied, little is known about the effect of rhodolith species and growth-form on associated fauna. Experiments were conducted at three rhodolith beds in the central-west Gulf of California. Faunal abundance differed significantly in relation to rhodolith-forming species, but no significant differences were observed between different growth-forms. Rhodolith structure differs between the species Lithophyllum margaritae and Neogoniolithon trichotomum , and the combination of structure differences and rhodolith abundances may be responsible of the significant differences in faunal abundance and richness. Crustaceans, polychaetes and molluscs were the most important taxa in all three rhodolith beds. The amphipod species Pontogeneia nasa and the cnidarian Aiptasia sp. were dominant in both rhodolith beds, El Requesón and Isla Coyote, in Bahía Concepción. The Isla Coronados rhodolith bed was dominated by an unidentified harpacticoid copepod (Copepoda sp.1). Rhodolith species is more important than growth-form in determining abundance and richness of the associated fauna. Nevertheless, factors such as wave motion, depth, bioturbation and others should be considered when studying organisms associated with rhodolith beds.     

Relationships Between Community Structure of the Intertidal Macroinfauna and Sandy Beach Characteristics Along the Chilean Coast

Abstract. Eight sandy beaches were seasonally sampled along the coast of Chile, from ca. 21 to 42° S (about 3000 km) to study the relationship between community structure of the intertidal macroinfauna and beach characteristics. Sediment samples (0.1 m², 30 cm deep) were collected (July – September 1998 and December 1998 – January 1999) with plastic cylinders at 15 equally spaced levels along three replicated transects extending from above the drift line to the swash zone. The sediment was sieved through a 1 mm mesh and the organisms collected stored in 5 % formalin. To define beach types, Dean's parameter (Ω) was calculated from wave heights and periods, and fall velocity of sand particles from the swash zone. Crustaceans (mainly peracarids) were the most diverse group with 14 species, followed by polychaetes with 5 species. The talitrid amphipod Orchestoidea tuberculata , the cirolanid isopods Excirolana braziliensis and E. hirsuticauda and the anomuran decapod Emerita analoga were the most widely distributed and common species. Regression analyses between species richness, abundance and biomass of the whole macroinfauna versus sediment characteristics, beach face slopes and morphodynamic beach states showed no significant relationships. Thus, macroinfaunal community characteristics did not increase linearly from lower intermediate to higher intermediate or dissipative beach states as had been found before in Chile or in other coasts. A comparative analysis with data from sandy beaches of other world regions showed that the number of species inhabiting Chilean sandy beaches was generally lower, whereas total population abundances were generally higher compared with values reported elsewhere.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Multiple scattering ofSH waves in 2-D media with many cavities

The full waveform synthetic seismogram of multiple scatteredSH waves by many cylindrical cavities in two-dimensional homogeneous elastic media is computed. We used the so-called single-layer potential integral representation of the scattered field and a discretization scheme with line source distribution for each cavity. The total field is the sum of the incident wave plus the field radiated from all sources, each multiplied by an unknown complex constant representing its strength. These constants are determined by imposing the appropriate boundary conditions in the least-squares sense. Here we solve scattering problems involving one, two, four, twelve and fifty cavities regularly distributed in a half-space. The seismograms computed along the free-surface show regions where the incident wave is strongly attenuated, as well as the arrivals of all multiple scattered phases. The accuray of the method is estimated from the degree of agreement of our solution for one cavity with the corresponding analytical solution, and also from the magnitude of the residual tractions along the boundaries of two cavities separated at various distances. Finally we apply the method to compute the case of fifty cylindrical cavities, each of radiusa, randomly distributed in a region 80a wide by 30a deep in a half-space. The value of scattering loss is obtained from the amplitude decay of the primary wave with distance for wavelengths in the range from 1.7a to 13.3a, using the synthetic seismogram calculated for the same distribution of 50 cavities as above, but in full-space.     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.     

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.