Large-scale rhomboid bed forms and sedimentary structures associated with hurricane washover*

Hurricane washover fans from the Texas Gulf Coast exhibit large-scale rhomboid bed forms developed on washover deposits of fine sand with varying shell content. Washover processes inferred from aerial photographs, storm characteristics, and physical settings suggest that these bed forms are the product of (1) storm surge flooding or (2) high wind shear stress. Multiple bed forms, including large-scale rhombs, are responsible for sedimentary structures preserved in washover deposits. Proximal channels exhibit scour and fill sequences capped by mud drapes. Mid-channel fan deposits also have scour bases marked by shell lags which are overlain by horizontal laminations and foreset and backset laminae. Distal fan sediments are relatively shell free and are interbedded with tidal flat deposits characterized by bioturbated, alternating sand and mud laminae. Rhomboidal patterns can form on the free surface of water in response to five processes: (1) wave interference from two externally independent sources, (2) wave interference from refraction of a single set of wave fronts, (3) standing oblique waves caused by bed roughness elements, (4) standing oblique waves formed at channel boundaries and channel transitions, and (5) wind stress. Geologically, standing oblique waves from unidirectional nearly supercritical flow is probably the most important process in rhomboid bed form development.     

SHIP-TOWED MAGNETICS IN PETROLEUM EXPLORATION*

In one geophysical survey over a salt dome in the Gulf of Mexico, data taken from a single magnetic and seismic shipborne traverse demonstrated significantly the importance of magnetic measurements. The reduced magnetic and seismic profiles were integrated with gravity measurements from an earlier survey demonstrating the value of obtaining simultaneous geophysical data. The traverse was approximately 25 miles in length, 135 miles southeast of Galveston, Texas. The observed gradient averaged approximately 2 gammas per 1000 feet and crosses the southwest corner of a large shallow salt dome called the Way Dome. The recorded magnetic profile over the salt dome shows a negative magnetic anomaly extending for approximately 12 miles with a maximum amplitude of approximately 20 gammas. This negatively anomaly is due to the negative susceptibility contrast between the salt and cap rock that truncates the surrounding parent sediments. The shape of the negative anomaly correlates well with the continous seismic record and clearly delineates the topographical and structural features of the salt dome. The recorded analog magnetic profile was replotted, with both the regional gradient and time variations removed, which makes the observed anomaly much sharper than is noticeable on the original recorded strip chart record. A theoretical magnetic anomaly was calculated using a computer program for comparison to the observed anomaly. The results showed good correlation.     

CONTINUOUS ANALYSIS OF THE VELOCITY FUNCTION AND OF THE MOVE OUT CORRECTIONS*

Several papers presented at the last SEG Convention in Houston by Schneider, Backus et al have shown how important and fruitful it was to obtain a continuous knowledge of the velocity functions and they have solved their problem by a Dynamic Correlation Analysis. Our purpose is to introduce here a method based on the best summation of a set of traces instead of the best correlation. Practically, this approach has several advantages: 1) Two traces only can be correlated at each step whereas the summation can bear on any number of them; 2) Optimizing the summation is actually what we are looking for since, at the long end, the success of the improvement is evaluated from the compositing of several traces either weighted or not. On the other hand, an advantage of correlation is the possibility of adding correlations obtained at several places in a same neighbourhood in order to improve the results. With the summation method this is feasible only when dips are inexistent: we shall see that the difficulty due to the dip effect can be turned around. The basic principle of the method can be summed up as follows: traces relating to a same reflection point are considered; several composites are made, each after applying different move out corrections ranging widely around an estimated adequate velocity function. At each time coordinate, the best adapted velocity function, i.e. the one that yields the best phase relation between reflected events, corresponds to the composite trace the average amplitude of which is the largest. This way, the velocity function corresponding to primary reflections as well as those corresponding to multiple reflections can be established accurately. Some examples are shown.     

THE ANGLE OF REPOSE FOR A SINGLE GRAIN ON A FIXED ROUGH BED

The angle of repose under water is experimentally determined for a single particle on a fixed rough bed. The effect of grain shape, size and sorting of the bed and ratio of particle diameter to average bed grain diameter are taken into account. An empirical equation is given for predicting angle of repose as a function of the above factors. The accuracy of fit of this equation is quite good. Several other conclusions drawn for the case of a single grain on a fixed rough bed are:

• 1 Angle of repose increases with decrease in size, departure from sphericity and increased angularity.
• 2 Angle of repose increase with decrease in sorting.
• 3 A single angle of repose for sand size grains is not valid. Variation ranges from nearly 90° to less than 20°, depending on the values of the factors given above.

     

SEDIMENT SIZE DISTRIBUTION PROFILE ON THE CONTINENTAL SHELF OFF NEW JERSEY1

A series of samples from the continental shelf off New Jersey reveals a continuous surface layer of fine sand overlying a variety of sediment type. Ripples and shell debris suggest the fine sand is reworked and is in adjustment with the present shelf environment.     

A revised seismic stratigraphy for Quaternary deposits on the inner continental shelf west of Scotland between 55°30'N and 57°30'N

A stratigraphy for Quaternary deposits on the western Scottish shelf has been erected using seismic and borehole data. Eight new formations are defined and described with evidence presented for the environ-ment of deposition of each formation. Most of the Quaternary sediments preserved on the shelf arc shown to have accumulated under stadial or glacial conditions. The possible age of each formation is discussed within the context of evidence provided from the mainland, shelf and deep-sea cores. Two are thought to be pre-Devensian, one is possibly pre-Devcnsian. one is possibly Early and/or Middle Devensian, two are probably Late Devensian, one is Late Devensian to Holocenc and one Present day in age. It is suggested that the Late Devensian ice reached the shelf margin south of the Outer Hebridcan Platform.     

Geochronology and Petrogenesis of the Cretaceous Antampombato-Ambatovy Complex and Associated Dyke Swarm, Madagascar

The Antampombato–Ambatovy complex is the largest intrusionin the central–eastern part of the Cretaceous flood basaltprovince of Madagascar, with an exposed surface area of about80 km². It has an ⁴⁰Ar/³⁹Ar incremental heating age of 89·9± 0·4 Ma and a U–Pb age of 90 ± 2Ma. The outcropping plutonic rocks range from dunite and wehrlite,through clinopyroxenite and gabbro, to sodic syenite. A dykeswarm cross-cutting some of the above lithologies (and the nearbyPrecambrian basement rocks) is formed of picritic basalts, alkalito transitional basalts, benmoreites and rhyolites; some ofthe latter are peralkaline. A few basaltic dykes have cumulateolivine textures, with up to 26 wt % MgO and 1200 ppm Ni, whereasothers have characteristics more akin to those of primitiveliquids (9 wt % MgO; Mg-number 0·61; 500 ppm Cr; 200ppm Ni). These basalts have relatively high TiO₂ (2·2wt %) and total iron (14 wt % as Fe₂O₃), and moderate contentsof Nb (10–11 ppm) and Zr (c. 100 ppm). Initial (at 90Ma) Sr- and Nd-isotope ratios of the clinopyroxenites and basaltdykes are 0·7030–0·7037 and 0·51290–0·51283,respectively. Syenites and peralkaline rhyolites have Sr- andNd-isotope ratios of 0·7037–0·7039 and 0·51271–0·51274,respectively. The data suggest derivation of the parental magmasfrom a time-integrated depleted mantle source, combined withsmall amounts of crustal contamination in the petrogenesis ofthe more evolved magmas. The isotopic compositions of the mafic–ultramaficrocks are most similar to those of the mid-ocean ridge basalt(MORB)-like igneous rocks of eastern Madagascar, and suggestthe existence of an isotopically ‘depleted’ componentin the source of the entire Madagascar province, even thoughthe Antampombato basalts are chemically unlike the lavas anddykes with the same depleted isotopic signature found in westernMadagascar. If this depleted component is plume-related, thissuggests that the plume has a broadly MORB-source mantle composition.The existence of isotopically more enriched magma types in theMadagascan province has several possible petrogenetic explanations,one of which could be the interaction of plume-related meltswith the deep lithospheric mantle beneath the island. KEY WORDS: geochronology; flood basalts; Antampombato–Ambatovy intrusion; Cretaceous; Madagascar     

GIS and people with visual impairments or blindness: Exploring the potential for education,orientation, and navigation

GIS, with their predominantly visual communication of spatial information, may appear to have little to offer people with visual impairments or blindness. However, because GIS store and manage the spatial relations between objects, alternative, non-visual ways to communicate this information can be utilized. As such, modified GIS could provide people with visual impairments access to detailed spatial information that would aid spatial learning, orientation, and spatial choice and decision making. In this paper, we explore the ways that GIS have been, and might be, adapted for use by people with visual impairments or blindness. We review current developments, report upon a small experimental study that compares the ability of GIS-based and various adaptive technologies to communicate spatial information using non-visual media, and provide an agenda for future research. We argue that adapted GIS hold much promise for implicitly improving the quality of life for visually impaired people by increasing mobility and independence.     

Tectonic controls on base-level variations and depositional sequences within thrust-top and foredeep basins: examples from the Neogene thrust belt of central Sicily

Tectonic subsidence and uplift may be recorded by concomitant sedimentation, not only from decompacted accumulation curves but also from the evolving depositional environment relative to sea level at the time. In thrust belts there are two types of processes capable of generating vertical movements, each with different wavelengths and amplitudes. Regional subsidence is driven by flexural loading by the orogenic hinterland, the thrust belt and accumulated sediments of the underlying foreland lithosphere. Within this flexure, the foreland thrust belt will generate areas of local uplift, notably at the crests of thrust anticlines. In this contribution we examine how these processes have interacted to influence relative sea level as recorded by late Neogene sediments in an array of basins developed above and adjacent to the Maghrebian thrust belt of central Sicily. Two particular periods are addressed, the late Tortonian to early Messinian (Terravecchia Formation) and early to early late Pliocene. The earlier of these is characterized by a deltaic complex that formed prograding depositional geometries, migrating into perched basins. Collectively, however, these units are transgressive and migrate back towards the orogen. A depositional model is presented that links the migration of facies belts to subsidence caused by accentuated tectonic loading in the hinterland and break-back thrust sequences across the basins. We infer that a palaeobathymetric profile of underfilled sub-basins resulted and that this influenced the pattern of evaporite accumulation during Mediterranean desiccation in Messinian times. The Pliocene sediments, accumulated under renewed global sea levels, prograded towards the foreland. A waning tectonic load in the hinterland driving isostatic rebound, uplift and coastal offlap is the proposed explanation. This contribution is a case history for the depositional evolution of dominantly submarine thrust systems and their record of relative sea-level changes.     

Sedimentation and extensional basin evolution in a Miocene metamorphic core complex setting, Alvord Mountain, central Mojave Desert, California, USA

The Lower Miocene Clews Formation at Alvord Mountain, Mojave Desert, California, comprises an upward coarsening sequence of synextensional continental deposits of variable thickness; this sequence pinches out to the west against the Alvord Mountain pre-Tertiary basement complex and thickens eastward to c.300 m over a distance of 7 km. Two stages of sedimentation are recognized in the formation. During the initial stage of sedimentation, the depocentre was delineated by a lacustrine system that was bounded to the west by small, sheetflood-dominated alluvial fans and to the north by a southerly flowing fluvial braidplain. Lacustrine mudstone, siltstone and carbonate suggest an initially closed basin. Conglomerate to the west represents small, sheetflood-dominated fans. Igneous clasts and a south-east palaeoflow direction suggest a proximal, low-relief source in the western Alvord Mountain area. Pebbly sandstone of the southward-prograding braidplain has a metasedimentary provenance in the Paradise Range to the north. The second stage of deposition was dominated by coarse conglomerate and breccia. West to southwest palaeotransport indicators and a distinctive metaigneous petrofacies indicate a provenance in the Cronese Hills, 8 km to the east. These strata reflect rapid westward progradation of sheetflood- and debris flow-dominated alluvial fans that advanced across the axial braidplain and lacustrine system. Basin development is interpreted to have been controlled by regional NE-directed extension on a detachment fault associated with the central Mojave metamorphic core complex. 30 km to the west. The Alvord Mountain - Cronese Hills region was initially transported as a single hangingwall block on the E-dipping detachment. Initial lacustrine sedimentation reflects the development of a flexural or sag basin in the hangingwall. Subsequent westward progradation of alluvial fans out of the Cronese Hills is believed to record the propagation of a NW-striking, SW-dipping normal fault antithetic to the low-angle E-dipping detachment fault.