Pore Water Characteristics Following a Release of Neat Ethanol onto Pre-existing NAPL

Neat ethanol (75.7 L) was released into the upper capillary zone in a continuous-flow, sand-packed aquifer tank (8.2 m³) with an average seepage velocity of 0.75 m/day. This model aquifer system contained a residual nonaqueous phase liquid (NAPL) that extended from the capillary zone to 10 cm below the water table. Maximum aqueous concentrations of ethanol were 20% v/v in the capillary zone and 0.08% in the saturated zone at 25 and 30 cm downgradient from the emplaced NAPL source, respectively. A bench-scale release experiment was also conducted for a similar size spill (scaled to the plan area). The concentrations of ethanol in ground water for both the bench- and pilot-scale experiments were consistent with advective–dispersive limited mass transfer from the capillary to the saturated zone. Concentrations of monoaromatic hydrocarbons and isooctane increased in the pore water of the capillary zone as a result of both redistribution of residual NAPL (confirmed by visualization) and enhanced hydrocarbon dissolution due to the cosolvent effect exerted by ethanol. In the tank experiment, higher hydrocarbon concentrations in ground water were also attributed to decreased hydrocarbon biodegradation activity caused by preferential microbial utilization of ethanol and the resulting depletion of oxygen. These results infer that spills of highly concentrated ethanol will be largely confined to the capillary zone due to its buoyancy, and ethanol concentrations in near-source zone ground water will be controlled by mass transfer limitations and hydrologic conditions. Furthermore, highly concentrated ethanol releases onto pre-existing NAPL will likely exacerbate impacts to ground water, due to NAPL mobilization and dissolution, and decreased bioattenuation of hydrocarbons.     

Late Pleistocene and early Holocene rivers and wetlands in the Bonneville basin of western North America

Field investigations at Dugway Proving Ground in western Utah have produced new data on the chronology and human occupation of late Pleistocene and early Holocene lakes, rivers, and wetlands in the Lake Bonneville basin. We have classified paleo-river channels of these ages as “gravel channels” and “sand channels.” Gravel channels are straight to curved, digitate, and have abrupt bulbous ends. They are composed of fine gravel and coarse sand, and are topographically inverted (i.e., they stand higher than the surrounding mudflats). Sand channels are younger and sand filled, with well-developed meander-scroll morphology that is truncated by deflated mudflat surfaces. Gravel channels were formed by a river that originated as overflow from the Sevier basin along the Old River Bed during the late regressive phases of Lake Bonneville (after 12,500 and prior to 11,000 ¹⁴C yr B.P.). Dated samples from sand channels and associated fluvial overbank and wetland deposits range in age from 11,000 to 8800 ¹⁴C yr B.P., and are probably related to continued Sevier-basin overflow and to groundwater discharge. Paleoarchaic foragers occupied numerous sites on gravel-channel landforms and adjacent to sand channels in the extensive early Holocene wetland habitats. Reworking of tools and limited toolstone diversity is consistent with theoretical models suggesting Paleoarchaic foragers in the Old River Bed delta were less mobile than elsewhere in the Great Basin.     

Biomarker characterisation and hydrous pyrolysis of bitumens from Tertiary volcanics, queen Charlotte islands, British Columbia, Canada

A number of bitumen samples have been recovered from vugs and fractures in outcropping Tertiary basalts of the Queen Charlotte Islands off the west coast of British Columbia, Canada. n-Alkanes and acyclic isoprenoids are not present and the polycyclic biomarker distribution of the four samples analyzed by GC and GC-MS has been altered. One sample contains no remaining recognizable biomarkers. Two bitumens were also obtained from Lower Jurassic potential source rocks, including one from the Sandilands Formation, which was considered previously to be the most likely source of the Tertiary bitumens. Although these two bitumens were also taken from outcrops, they are considerably less biodegraded. The Sandilands Formation bitumen contains 28, 30-bisnorhopanes and since these compounds were not detected in the Tertiary bitumens, there is no evidence from the initial results for a Sandilands Formation contribution to the hydrocarbons in the Tertiary basalts. The presence of 18α(H)-oleanane in the saturate fraction of two of the Tertiary bitumens from widely separated locations indicates that they are at least partially sourced from Tertiary organic matter.Because the distribution of biomarkers in some samples has been severely affected by biodegradation, the asphaltenes of the bitumens were hydrously-pyrolysed and the saturate fractions of the resulting pyrolysates analysed for possible additional information on the origin of the bitumens. The pyrolysates from the more degraded samples contain compounds not detected in the saturate fractions of the original bitumen and show some of the expected characteristics of the original non-degraded bitumen. However, the compounds most useful for correlation are not present in the pyrolysates apparently due to their non-incorporation into the kerogen macromolecule. Our results suggest that hydrous-pyrolysis of asphaltenes is of limited use in the correlation of biodegraded samples and in determining their origins.     

Late Quaternary marine terraces in the Mediterranean coastal area of Syria: Geochronology and neotectonics

In order to provide new data on the neotectonics and geodynamic properties of western Syria, studies of marine terraces have been carried out. The most attention was paid to the lower terraces in the range of 3–5 to 30–35 m above sea level, because they have more complete distributions along the shore. The lower terraces were examined along the coastal area from Tartus to Latakia, and along the carbonate cliff on Arwad Island. Seven ²³⁰Th/U dates for these terraces are in the range of 85–130 ka, suggesting the age interval of the last interglacial (MIS 5). New dates on the lower terraces provide a basis for stratigraphical and geomorphological interpretation as well as neotectonic reconstruction. According to the geomorphological data and lithological composition of those terraces, two main uplifted blocks can be established. One coincides with the Latakia block, and another corresponds to the western margin of the Banias volcanic plateau. These blocks are divided by a subsided structure corresponding to the Nahr el Kebir graben. The amplitude of neotectonic uplifting in the Latakia and Banias blocks reaches 15–20 m for the Late Pleistocene.     

Practical kinetic modeling of petroleum generation and expulsion

Models for petroleum generation used by the industry are often limited by (a) sub-optimal laboratory pyrolysis methods for studying hydrocarbon generation, (b) over-simple models of petroleum generation, (c) inappropriate mathematical methods to derive kinetic parameters by fitting laboratory data, (d) primitive models of primary migration/expulsion and its coupling with petroleum generation, and (e) insufficient use of subsurface data to constrain the models. Problems (a), (b) and (c) lead to forced compensation effects between the activation energies and frequency factors of reaction kinetics that are wholly artificial, and which yield poor extrapolations to geological conditions. Simple switch or adsorption models of expulsion are insufficient to describe the residence time of species in source rocks. Yet, the residence time controls the thermal stresses to which the species are subjected for cracking to lighter species.     

Sodar Detected Top-Down Convection in a Nocturnal Cloud-Topped Boundary Layer: A Case Study

Nocturnal convection, originating in a well-mixed marine cloud-topped boundary layer, advected onshore, was observed using a Doppler sodar on the Tyrrhenian coast in Italy. The horizontal and vertical dimensions of the downdrafts were evaluated. The oscillation frequency triggered by the downdrafts at the inversion layer, derived from the harmonic analysis of the sodar measured vertical velocity (w), is compared with the Brunt-Vaisala frequency, obtained from the rawinsonde temperature profile. A similarity function for the ²_w vertical profile was used to fit the sodar experimental data and to retrieve the depth of the mixing layer and the sensible heat flux at the top of the cloud layer. The results are in agreement with the convection layer depth observed in the sodar echoes facsimile record, and with the energy budget evaluated at the top of the cloud layer using the rawinsonde profiles.     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

A B-spline based higher order panel method for analysis of steady flow around marine propellers

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.