Initial results and progress of the Mississippi delta sediment pore water pressure experiment

Abstract

This report describes the instrumentation, initial results, and progress of an experiment designed to measure and monitor submarine sediment pore water and hydrostatic pressures in a selected area of the Mississippi Delta. The experiment also is intended to monitor significant pressure perturbations during active storm periods. Initial analysis of the data revealed excess pore water pressures in the silty clay sediment at selected depths below the mudline. Continuous monitoring of the pore water and hydrostatic pressures was expected to reveal important information regarding sediment pore water pressure variations as a function of the geological processes active in the Mississippi Delta.     

Secondary flow caused by differential roughness,Langmuir circulations,and their effect on the development of sand ribbons

The process of Differential Roughness Secondary Flow (DRSF), hitherto little recognized, recently was demonstrated in a wind tunnel and in a flume. It is suggested here the DRSF may, in the natural environment, play an important part in the persistence and sharp definition of sand ribbons, previously initiated by other processes. In 1980 Karl described a series of sand ribbons, alternating with exposed substrate, which he attributed to the effect of Langmuir circulations. Although Langmuir Circulation Secondary Flow (LCSF) may indeed, in some cases, initiate sand ribbons, the sharply-defined edges typical of these features are explained better by DRSF.     

Submerged cylinder wave energy device: theory and experiment

Linearized water wave theory is used to show that a submerged long circular cylinder suitably constrained by springs and dampers to make small harmonic oscillations, can be extremely efficient in absorbing the energy in an incident regular wave whose crests are parallel to the axis of the cylinder. Experimental results are described which confirm the theory for small amplitude waves and which suggest that the device can still be fairly efficient in waves of moderate amplitude.     

An investigation of upper mantle heterogeneity beneath the Archaean and Proterozoic crust of western Canada from Lithoprobe controlled-source seismic experiments

Observations of upper mantle reflectivity at numerous locations around the world have been linked to the presence of a heterogeneous distribution of rock types within a broad layer of the upper mantle. This phenomenon is observed in wide-angle reflection data from Lithoprobe's Alberta Basement Transect [the SAREX and Deep Probe experiments of 1995] and Trans-Hudson Orogen Transect [the THoRE experiment of 1993]. SAREX and Deep Probe image the Archaean lithosphere of the Hearne and Wyoming Provinces, whereas THoRE images the Archaean and Proterozoic lithosphere of the Trans-Hudson Orogen and neighbouring areas.Finite-difference synthetic seismograms are used to constrain the position and physical properties of the reflective layer. SAREX/Deep Probe modelling uses a 2-D visco-elastic finite-difference routine; THoRE modelling uses a pseudospectral algorithm. In both cases, the upper mantle is parameterized in terms of two media. One medium is the background matrix; the other is statistically distributed within the first as a series of elliptical bodies. Such a scheme is suitable for modelling: (1) variations in lithology (e.g., a peridotite matrix with eclogite lenses) or (2) variations in rheology (e.g., lenses of increased strain within a less strained background).The synthetic seismograms show that the properties of heterogeneities in the upper mantle do not change significantly between the two Lithoprobe transects. Beneath the Trans-Hudson Orogen in Saskatchewan, the layer is best modelled to lie at depths between 80 and 150 km. Based on observations from perpendicular profiles, anisotropy of the heterogeneities is inferred. Beneath the Precambrian domains of Alberta, 400 km to the west, upper mantle heterogeneities are modelled to occur between depths of 90 and 140 km. In both cases the heterogeneous bodies within the model have cross-sectional lengths of tens of kilometers, vertical thicknesses less than 1 km, and velocity contrasts from the background of − 0.3 to − 0.4 km/s. Based on consistency with complementary data and other results, the heterogeneous layer is inferred to be part of the continental lithosphere and may have formed through lateral flow or deformation within the upper mantle.     

Attenuation relations for strong seismic ground motion in the Himalayan region

Strong motion data from various regions of India have been used to study attenuation characteristics of horizontal peak acceleration and velocity. The strong ground motion data base considered in the present work consists of various earthquakes recorded in the northern part of India since 1986 with magnitudes 5.7 to 7.2. Using these data, relations for horizontal peak acceleration and velocity, which are $$\begin{gathered} log_{10} a = 1.14 + 0.31M + 0.65log_{10} R \hfill \\ log_{10} v = 0.571 + 0.41M + 0.768log_{10} R \hfill \\ \end{gathered} $$ have been proposed wherea is the peak horizontal acceleration in cm/sec²,v is the peak horizontal velocity in mm/sec,M is body wave magnitude, andR is the hypocentral distance in km. The proposed relations are in reasonable agreement with the small amount of strong ground motion data available for the northern part of India. The present results will be useful in estimating strong ground motion parameters and in the earthquake resistant design in the Himalayan region.     

Long term variations in the mesospheric mean flow observed at Grahamstown (South Africa) and Adelaide (Australia)

The seasonal and interannual behaviour of monthly mean winds at a height of 90 km recorded at Grahamstown (33.3°S, 26.5°E) and Adelaide (34.5°S, 138.5°E) between 1987 and 1994 are compared. The zonal wind is found to be consistently stronger at Grahamstown and is always eastward, whereas at Adelaide it sometimes reverses. Maxima tend to occur near the solstices, the primary maximum during summer at Grahamstown, in agreement with satellite results, and during winter at Adelaide. The meridional wind also tends to be stronger at Grahamstown, but at both stations is predominantly northward with a maximum in summer and generally not as strong as the zonal component. This seasonal behaviour is reasonably well understood in terms of the interaction of the mean flow with gravity waves propagating up from below, with coriolis forces also playing an important role in the case of the meridional wind. Satellite observations do not generally support the idea that longitudinal differences between the stations could be attributed to the presence of a tropospheric/stratospheric stationary wave. It is suggested that these differences are more probably associated with local effects. Interannual zonal wind patterns at the two sites are similar over the summer months but are less well correlated during the rest of the year. The underlying causes of this variability are not well understood but are most probably global in nature, at least during the summer.     

Sediment oxygen profiles in a super-oxygenated antarctic lake

Perennially ice-covered lakes are found in the McMurdo Dry Valleys of southern Victoria Land, Antarctica. In contrast to temperate lakes that have diurnal photic periods, antarctic (and arctic) lakes have a yearly photic period. An unusual feature of the antarctic lakes is the occurrence of O2 at supersaturated levels in certain portions of the water column. Here we report the first sediment O2 profiles obtained using a microelectrode from a perennially ice-covered antarctic lake. Sediment cores collected in January and October 1987 from Lake Hoare in Taylor Valley show oxygenation down to 15, and in some cases, 25 cm. The oxygenation of sediments several centimeters below the sediment-water interface is atypical for lake sediments and may be characteristic of perennially ice-covered lakes. There is a significant difference between the observed January and October sediment O2 profiles. Several explanations may account for the difference, including seasonality. A time-dependent model is presented which tests the feasibility of a seasonal cycle resulting from the long photoperiod and benthic primary production in sediments overlain by a highly oxygenated water column.     

A review of the metallogeny and tectonics of the Lachlan Orogen

Future mineral exploration within eastern Australia will be enhanced by resolving the tectonic evolution of the Lachlan Orogen to establish the spatial and temporal terrane distribution of the various mineral deposits. The Lachlan Orogen, from north-eastern Tasmania through to central and eastern New South Wales, is host to a number of major mineral deposit styles—including orogenic gold (e.g. Stawell, Ballarat, Bendigo), volcanic-hosted massive sulphide (e.g. Woodlawn, Currawong), sediment-hosted Cu–Au (e.g. Cobar Basin deposits), porphyry Au–Cu (e.g. Cadia, Parkes, Cowal) and granite-related Sn (e.g. Ardlethan, Beechworth). Each of these mineral deposit styles is a sensitive and diagnostic indicator of the prevalent tectonic environment during their formation. In this review, we briefly summarise the deposit- to large-scale factors that define the diverse metallogenic evolution of the Lachlan Orogen. This overview is intended to “set the scene” for subsequent specialist papers published in this thematic issue on the metallogeny and tectonics of the Lachlan Orogen in south-east Australia.     

Experimental Study of the SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O–KF–KCl–NaF System at 700–800°C and 1–2 kbar Based on Synthetic Fluid Inclusions in Quartz

The phase state of the fluid in the H₂O–KF ± KCl ± NaF system is studied in the presence of quartz for an experimental assay of the mutual influence of various salts of the fluid-forming mixture on heterogeneous fluid equilibria. The fluid inclusions were synthesized in quartz by the fracture healing method from solutions with KF + KCl and KF + NaF mixtures at 1 or 2 kbar and 700, 750, or 800°C. The results of the fluid inclusion study indicate a heterogeneous state of the fluid and variation in the fluid composition during experiments as a result of its interaction with quartz. The increase in temperature and pressure, as well as variation in the proportions of the salt contents in the fluid-forming mixture, changed the course of chemical reactions. After all the experiments, a glassy phase was observed in some types of inclusions. It is known that aqueous KF or KCl solutions, the solubility of which increases during heating, are characterized by phase equilibria of systems of the first type (Valyashko, 1990), when liquid and vapor are equilibrated for a heterogeneous state of the fluid. In this case, some inclusions should homogenize to vapor. However, no similar inclusions were observed in contrast to denser fluid phases (liquids), which are typical of the upper heterogeneous area of systems of the second (P–Q) type. Some inclusions host solid phases, the solubility of which decreases as the temperature increases. The results of experiments in the presence of KF + NaF solutions showed that the amount of inclusions of heterogeneous entrapment increases at higher temperatures simultaneously with a decrease in the H₂O content of the glassy phase.