Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.     

Central Europe: Active or residual tectonic stresses

The regional stress field in the Western Alps and their northern foreland has been investigated byin situ stress determinations. More than 600 strain relief measurements were made with resistance strain gages in boreholes carried out in mines, tunnels and quarries. The stresses calculated and data obtained from other papers were used to get a detailed idea of the stress conditions in Central Europe.The measurements confirm a continuous flux of compressive stress from the Alps to the northern foreland east of the Rhinegraben. The largest stresses are observed in the Central Alps, the lowest in the Rhinegraben rift system. The horizontal stresses exceed at nearly all places the vertical ones. Evidently the excess of horizontal stress is generated by active plate tectonics in the Alps. A tectonic model to explain the observed stress pattern is presented.     

A field test of tubino's (1991) model of alternate bar formation

This study investigates the fluvial dynamics of straight natural stream channels. In particular, this experimental field study quantitatively assesses a physically based non-linear mathematical theory of alternate bar formation under unsteady natural flow conditions within a straight alluvial stream. The study site is an artificially straightened section of the Embarras River located approximately 16 km south of Champaign, Illinois. Data were collected on channel form, gradient, alternate bar dimensions, bed sediment size and flow stage over a 2 year study period. Both linear and non-linear steady flow hydrodynamic theories suggest that alternate bars are critical to the process of meander development. But these theories do not predict bar development for unsteady flow conditions, which typically occur in natural alluvial channels. Tubino (1991) suggests that bar evolution for a flood hydrograph can be divided into three parts: (1) a period of limited bar growth during the rising stage of the flood; (2) a stage of modest bar decay near the peak of the flood; and (3) a stage of non-linear bar growth during the prolonged falling stage of the flood. Bars developed during the falling limb of a hydrograph, and exhibited sequential development rather than the uniform growth along the reach predicted by Tubino's model. As flow stage decreased, short, low, fine-grained bars were superimposed on long, high and coarser-grained bars that developed under preceding high flow stages. These results suggest that the process of bar formation in artificially straightened natural streams with heterogeneous bed material may occur under different flow conditions and in a different manner than predicted by theoretical models. Further work should focus on attempting to isolate the physical mechanisms responsible for alternate bar formation in straight natural streams with heterogeneous bed material and flashy hydrologic flow regimes.     

Observations of rapid mean flow produced in mercury by a moving heater

Abstract

Experimental and theoretical results are described for the moving flame experiment, where a heat source moves under a horizontal, annular channel filled with liquid mercury. The physical range under discussion consists of the creep flow limit, in which inertial forces are less than viscous forces. A mean surface flow was observed on the mercury. This flow was up to four times greater than the heater speed, and in an opposite direction. The ratio of mean flow to heater speed was theoretically and experimentally found to be proportional to the square of the thermal amplitude, in agreement with a special limit of Davey's earlier results. The basic flow here, as contrasted to those flows analyzed by earlier theories, appears to be generated by surface tension. However, the Reynolds stress mechanism which generates the mean flow is the same. Some experimental flows were so rapid that the range of validity of the present, as well as some earlier theories, was exceeded. The present theory suggests that the higher order nonlinearities may have cancellative effects, which implies that the present and some earlier theories are valid beyond their normal range of validity.     

Age and isotopic studies of some Pan-African granites from North-Central Nigeria

Twenty-nine Rb-Sr whole-rock isotopic analyses and three U-Pb zircon analyses on foliated granites and largely unfoliated charnockitic rocks indicate that the central part of the Pan-African belt in west Africa was characterised by intense orogenic plutonism. These data and Rb-Sr analyses on muscovite books from late cross-cutting pegmatites indicate that the peak of magmatic activity occurred 610 ± 10 m.y. ago.Initial ⁸⁷Sr/⁸⁶Sr ratios for the granitic and charnockitic rocks are in the range 0.7065–0.7125, and indicate a significantly older crustal component in the magmas.     

Meteor44 Video Meteor Photometry

Meteor44 is a software system developed at MSFC for the calibration and analysis of video meteor data. The photometric range of the (8 bit) video data is extended from a visual magnitude range of from 8 to 3 to from 8 to −8 for both meteors and stellar images using saturation compensation. Camera and lens specific saturation compensation coefficients are derived from artificial variable star laboratory measurements. Saturation compensation significantly increases the number of meteors with measured intensity and improves the estimation of meteoroid mass distribution. Astrometry is automated to determine each image's plate coefficient using appropriate star catalogs. The images are simultaneously intensity calibrated from the contained stars to determine the photon sensitivity and the saturation level referenced above the atmosphere. The camera's spectral response is used to compensate for stellar color index and typical meteor spectra in order to report meteor light curves in traditional visual magnitude units. Recent efforts include improved camera calibration procedures and long focal length "streak" meteor photometry. Meteor44 has been used to analyze data from the 2001, 2002 and 2003 MSFC Leonid observational campaigns as well as several lesser showers.     

Tropospheric Ozone in a Global-Scale Three-Dimensional Lagrangian Model and Its Response to NOX Emission Controls

A three-dimensional Lagrangian tropospheric chemistry modelis used toinvestigate the impact of human activities on the tropospheric distributionofozone and hydroxyl radicals. The model describes the behaviour of 50 speciesincluding methane, carbon monoxide, oxides of nitrogen, sulphur dioxide andnineorganic compounds emitted from human activities and a range of other sources.Thechemical mechanism involves about 100 chemical reactions of which 16 arephotochemical reactions whose diurnal dependence is treated in full. The modelutilises a five minute chemistry time step and a three hour advection timestepfor the 50,000 air parcels. Meteorological data for the winds, temperatures,clouds and so on are taken from the UK Meteorological Office global model for1994 onwards. The impacts of a 50% reduction in European NO_Xemissions onglobal ozone concentrations are assessed. Surface ozoneconcentrations decrease in summertime and rise in wintertime, but to differentextents.     

A NEW APPROACH TO THE INVERSION OF SEISMIC DATA*

A new inversion method for seismic reflection data is based on impedance concepts and uses transformations to reduce the essentially non-linear problem to a linear eigenvalue formulation without approximation. A set of reflection data has been inverted using this method. The characteristic impedances of the layers so determined are compared with log data from a reference borehole.     

Mineralogical, chemical, and crystallographic properties of supergene jarosite-group minerals from the Xitieshan Pb-Zn sulfide deposit, northern Tibetan Plateau, China

Supergene jarosite-group minerals are widespread in weathering profiles overlying Pb-Zn sulfide ores at Xitieshan, northern Tibetan Plateau, China. They consist predominantly of K-deficient natrojarosite, with lesser amounts of K-rich natrojarosite and plumbojarosite. Electron microprobe (EMP) analyses, scanning electron microcopy (SEM) investigation, and X-ray mapping reveal that the jarosite-group minerals are characterized by spectacular oscillatory zoning composed of alternating growth bands of K-deficient and K-bearing natrojarosite (K₂O >1 wt.%). Plumbojarosite, whenever present, occurs as an overgrowth in the outermost bands, and its composition can be best represented by K_0.29Na_0.19Pb_0.31Fe_2.66Al_0.22(SO₄)_1.65(PO₄)_0.31(AsO₄)_0.04(OH)_7.37. The substitution of monovalent for divalent cations at the A site of plumbojarosite is charge balanced by the substitution of five-valent for six-valent anions in XO₄ at the X site. Thermogravimetric analysis (TGA) of representative samples reveal mass losses of 11.46 wt.% at 446.6 °C and 21.42 wt.% at 683.4 °C due to dehydroxylation and desulfidation, respectively. TGA data also indicate that the natrojarosite structure collapses at 446.6 °C, resulting in the formation of NaFe(SO₄)₂ and minor hematite. The decomposition products of NaFe(SO₄)₂ are hematite and Na₂SO₄. Powder X-ray diffraction (XRD) analyses show that the jarosite-group minerals have mean unit-cell parameters of a?=?7.315 Å and c?=?016.598 Å. XRD and EMP data support the view that substitutions of Na for K in the A site and full Fe occupancy in the B site can considerably decrease the unit-cell parameter c, but only slightly increase a. The results from this study suggest that the observed oscillatory zoning of jarosite-group minerals at Xitieshan resulted mainly from substitutions of K for Na at the A site and P for S at the X site.