Geotechnical assessment of the bearing capacity of coal mine floors

Summary This investigation concerns 3 longwall faces having variable strata and mining conditions, but supported by 202 tonnes hydraulic 6-leg chocks. Bearing capacity tests along the faces were conducted to evaluate the factors influencing floor deformation and failure. The effect of size, shape and perimeter of the base plates, thickness of the floor layer, time and moisture on the ultimate bearing capacity of the floor was measured and discussed. Application of this work is the prediction of stability and support performance of face ends, as well as the design of support systems and ground control on production faces.     

Possible representation for discovery observations of stellar flares

It is shown that the chronology of flare star discoveries in the Pleiades cluster and the Orion association can be described satisfactorily by various distribution functions (gamma, binomial, decreasing exponential, and delta) for the mean frequencies of stellar flares. However, it has been found that this is due to the uncertainty in the observationally derived distribution function for the mean frequency of stellar flares. The most likely function is that derived by Ambartsumian, which has a physical basis.Translated fromAstrofizika, Vol. 38, No. 1, pp. 25–32, January–March, 1995.     

Geochemical correlations between effusive and explosive silicic volcanics in the Saraykent region (Yozgat), central Anatolia,Turkey

Two main volcanic events are distinguished between Saraykent and Akçakışla in the Yozgat province of central Anatolia: (1) early Late Cretaceous–Palaeocene effusive activity, that produced a sequence of intermediate to felsic ‘basal lavas’; and (2) marginally later Palaeocene explosive activity that formed a series of covering ignimbrite flows. Due to their close temporal and spatial relation, geochemical comparisons were made between the silicic members of the lavas and ignimbrites, to identify chemical groups and their relative petrogenesis. The basal lavas range from calc‐alkaline basaltic andesites to dominant rhyolites. Based on trace element correlations three main geochemical groups were identified: the Akçakışla rhyolites (present as domes); Akçakışla rhyodacites‐dacites (lava flows); and Ozan‐Saraykent rhyolites (lava flows). Large‐ion lithophile elements have been mobile in all the groups, but mainly in the Akçakışla rhyolites. Rare earth element (REE) patterns show marked similarity between the Ozan and Saraykent basal lavas. The Akçakışla dome rhyolites are more fractionated with lower La_N/Yb_N ratios (c.10), whereas the Akçakışla basal lavas have much higher La_N/Yb_N ratios (c.30). The chemical coherence and petrographic similarities between the Saraykent and Ozan lavas suggest a single suite related via fractionation. Three geochemical groups were also established for the ignimbrites: Saraykent ignimbrite; Bağlıca ignimbrite‐Toklu‐Kızıldağ crystal tuffs; and Keklikpınar ignimbrite. The ignimbrites, like the basal lavas, display a pronounced depletion in Ba on ORG‐normalized plots. Relative to the basal lavas, chondrite‐normalized patterns for the ignimbrites are different in displaying negative Eu anomalies that indicate feldspar fractionation. The lack of geochemical overlap or coherence between any of the lava and ignimbrite groups suggests that they represent distinct eruptive events and are not related in any simple volcanic development and cogenetic sense. Two geochemical features are common to all the volcanic rock groups: (1) the presence of a Nb‐Ta anomaly, which is generally accepted as a crustal signature; and (2) the relatively low Y abundances which appear characteristic for the region as a whole. These fundamental features of the local silicic volcanism largely reflect source composition and effects. Copyright © 2002 John Wiley & Sons, Ltd.     

Hanford tank residual waste – Contaminant source terms and release models

Residual waste is expected to be left in 177 underground storage tanks after closure at the US Department of Energy’s Hanford Site in Washington State, USA. In the long term, the residual wastes may represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt.%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt.%, respectively. Aluminum concentrations are high (8.2–29.1 wt.%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt.%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U–Na–C–O–P ± H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)₂-saturated solution, or a CaCO₃-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO₃-saturated solution than with the Ca(OH)₂-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)₂-saturated solution than by the CaCO₃-saturated solution. In general, Tc is much less leachable (<10 wt.% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids.     

Residual deformations and seismic hazard of fault zones in underground workings

The results of long-term measurements of residual deformations in the area of the Severomuiskii tunnel during its construction are given. Comparison of spatial and temporal distributions between deformations and earthquakes shows that they are interrelated. The nonlinear behavior of disintegrated and waterlogged rocks within tectonic fault zones should be taken into account even for moderate intensity earthquakes, since they are accompanied by ground subsidence. Underground workings within such sites are subjected to loads that are greater than expected according to current hypotheses, which are the basis for calculations of rock pressure. It is established that the most probable mechanism of ground subsidence and residual deformation in underground workings could be the gravity load of the overlying strata of disintegrated and waterlogged rocks within a fault zone, which leads to instability of the rocks. Approximate stress estimations are made on the basis of the results of measurements of residual deformations of roof supports (linings).     

Analysis of mutations in the p53 tumor suppressor gene and Ki- and Ha-ras proto-oncogenes in hepatic tumors of European flounder (Platichthys flesus).

DNA from five tumors, three other-injured livers and two normal liver tissue samples from the European flounder were analyzed for mutations in exons 5-8 of the tumor suppressor gene p53 and at codons 12, 13 and 61 of Ha- and Ki-ras proto-oncogenes. No tumor-specific mutations were identified by direct sequencing and single-strand conformation polymorphism of these genes. A number of silent polymorphisms were noted in p53. In addition to a need for more extensive analyses of flounder liver tumor samples for ras or p53 mutations, other cancer-related genes should be investigated.     

Fe3+ in shocked olivine crystals of the ALHA 77005 meteorite

ALHA 77005, a shocked achondrite of the shergottite group, is unique in containing cumulus olivine crystals which display a brownish color in thin section. Mössbauer, EPR, and optical spectroscopic studies show the presence of Fe³⁺ in the olivine. Approximately 4.5 wt.% of the total iron in the olivine (24 wt.% as FeO) is in the trivalent state. The Fe³⁺ ions preferentially occupy M2 lattice positions. Charge transfer between Fe³⁺ and Fe²⁺ as well as between Fe³⁺ and oxygen ligands causes a broad absorption band in the optical spectrum at high energies which is the reason for the olivine color. It is concluded that the color of the ALHA 77005 olivine is preterrestrial and may be the result of shock-induced oxidation of the olivine crystals on the meteorite parent body.     

Improved Resolution of Ambient Flow through Fractured Rock with Temperature Logs

In contaminant hydrogeology, investigations at fractured rock sites are typically undertaken to improve understanding of the fracture networks and associated groundwater flow that govern past and/or future contaminant transport. Conventional hydrogeologic, geophysical, and hydrophysical techniques used to develop a conceptual model are often implemented in open boreholes under conditions of cross-connected flow. A new approach using high-resolution temperature (±0.001°C) profiles measured within static water columns of boreholes sealed using continuous, water-inflated, flexible liners (FLUTe™) identifies hydraulically active fractures under ambient (natural) groundwater flow conditions. The value of this approach is assessed by comparisons of temperature profiles from holes (100 to 200 m deep) with and without liners at four contaminated sites with distinctly different hydrogeologic conditions. The results from the lined holes consistently show many more hydraulically active fractures than the open-hole profiles, in which the influence of vertical flow through the borehole between a few fractures masks important intermediary flow zones. Temperature measurements in temporarily sealed boreholes not only improve the sensitivity and accuracy of identifying hydraulically active fractures under ambient conditions but also offer new insights regarding previously unresolvable flow distributions in fractured rock systems, while leaving the borehole available for other forms of testing and monitoring device installation.