北京岩溶水资源信息系统的设计与实现

着重研究系统总体结构,系统数据组织和管理以及系统专业功能的设计与实现。本系统基于．NET平台和ArcGIS二次开发而成,最终实现数据信息的可视化管理及应用。     

The bound weighted average method (BWAM) for predicting S-wave velocity

The shear-wave velocity is a very important parameter in oil and gas seismic exploration, and vital in prestack elastic-parameters inversion and seismic attribute analysis. However, shearing-velocity logging is seldom carried out because it is expensive. This paper presents a simple method for predicting S-wave velocity which covers the basic factors that influence seismic wave propagation velocity in rocks. The elastic modulus of a rock is expressed here as a weighted arithmetic average between Voigt and Reuss bounds, where the weighting factor, w, is a measurement of the geometric details of the pore space and mineral grains. The S-wave velocity can be estimated from w, which is derived from the P-wave modulus. The method is applied to process well-logging data for a carbonate reservoir in Sichuan Basin, and shows the predicted S-wave velocities agree well with the measured S-wave velocities.     

地震沉积学在近岸水下扇沉积体系分析中的应用以泌阳凹陷东南部古近系核三上亚段为例

泌阳凹陷东南部受盆地边界断层控制,主要沉积平氏、栗园两套近岸水下扇复合体。为解决砂砾岩体分布预测的难题,本次研究在建立泌阳凹陷东南部陡坡带核三上亚段高频层序地层格架的基础上,运用地震沉积学的技术,进行相位转换、分频处理、地层切片,分析研究区古近纪核桃园组上亚段4个四级层序(从上到下SQH31-SQH34)内,近岸水下扇复合沉积体系的砂体展布特征,并与钻井资料相结合,建立了研究区核三上亚段的沉积相模式。研究表明核三上亚段沉积早期,断裂活动强度大,SQH34-SQH33内扇体展布面积较大,核三上亚段沉积晚期SQH32-SQH31,扇体横向展布相对稳定。其中,中扇亚相的辫状水道砂体,以及扇体前端的滑塌浊积体是油气勘探的主要目标。     

Removal of K^＋, Na^＋, Ca^2＋, and M^g2＋ from saline-alkaline water using the microalga Scenedesmus obliquus

The capability ofScenedesmus obliquus to remove cations （K^＋, Na^＋, Ca^2＋, Mg^2＋） from saline- alkaline water was investigated at different salinities （0, 5, 10, 15, 20, 25） and carbonate alkalinities （0, 5, 10, 15, 20, 25, 30, 35 mmol/L）. K^＋, Na^＋, Ca^2＋, and Mg^2＋ in saline-alkaline water were efficiently removed by S. obliquus. The maximum removal of the cations （29.37 mg for K^＋, 185.85 mg for Na^＋, 23.07 mg for Ca^2＋, 66.14 mg for Mg^2＋） occurred at salinity 25. The maximum removal of K^＋ （2.28 mg）, Na＋ （6.62 mg）, Ca^2＋ （1.01 mg）, and Mg2＋ （0.62 mg） occurred at carbonate alkalinities of 25 mmol/L for K＊, 35 mmol/L for Na＋, 20 mmol/L for Ca2＋, and 25 mmol/L for Mf＋, respectively. Under a salinity stress, the concentration of Na＇ in S. obliquus increased significantly, while that of K~ decreased significantly. The concentrations of Ca^2＋ and Mg2＋ decreased as well. The ratios of K＋/Na~, Ca2＋/Na^＋, and Mg^2＋/Na^＋ were significantly lower in all salinity treatments than those of the control. Under alkaline stress, the concentrations of Nan and K＋ in S. obliquus decreased significantly and the ratios of K^＋/Na^＋, Ca2＋/Na^＋, and Mg^2＋/Na^＋ were significantly higher in all treatments than in the control. Moreover, the concentrations of Ca2＋ and Mg2＋ in S. obliquus at alkalinities of 5-10 mmol/L were significantly higher than those of the other treatments. The removal of Na＋ by S. obliquus mainly occurs through biosorption, and Mg^2＋ and Ca^2 ＋ were removed through both biosorption and bioaccumulation.     

北天山北缘构造剖面测量及多期构造变形

天山北缘为典型的大陆内部活动构造特征,发育准噶尔盆地南缘逆冲带,主要表现为新生代时期形成的多排平行山体的背斜和逆冲断层。为了详细研究该区主要构造变形特征和变形形成时间,2005年我们对天山北缘进行了详细的地表地质剖面测量,之后进行了多年地表地质区域调查,落实了关键砾岩地层时代,充分结合卫星遥感影像资料、二维三维地震剖面和钻井测井资料,应用断层相关褶皱理论,完成了一条近SN向的长度50 km的金钩河-安集海河构造地质大剖面。野外观察和地质测量以及生长地层和生长地层不整合分析表明,安集海深层背斜初始形成时间为中新世早期,在第四纪西域组（Q1x）、乌苏群(Q2)和第四纪中晚期(Q4)最终定型的浅表背斜,深层为断层转折褶皱和中浅层反冲的楔形构造叠加组合而成;霍尔果斯深层背斜初始形成时间为中新世晚期,在第四纪中晚期Q4最终定型,构造样式为深层断层转折褶皱、中深层楔形构造和浅层断层扩展背斜叠加组合而成。区域地质调查发现一条近东西走向285°,发育在中生界地层的准南走滑断层,该断层位于准南边界逆冲断裂以北,形成时间最晚（Q4）。根据准南安集海背斜、霍尔果斯背斜和准南边界逆冲断裂初始形成时间,可以认为准南构造初始逆冲次序为后展式,然后整个逆冲带从第四纪早期西域组晚期开始一直活动到现今。     

淘汰落后产能的产业转型政策在典型工业行业的节能效果分析

利用我国2011-2015年典型产业淘汰落后产能数据,研究了通过淘汰落后产能实现产业结构减排的净能源节约量,评价了不同行业在节能中发挥的作用,分析了全国范围内典型产业转型能源节约量的动态变化情况。估算结果表明：2011-2015年淘汰落后产能的年净能源节约量分别为1357.77万、1245.70万、1067.32万、981.42万和483.70万tce,期间累计净能源节约预期达到5135.91万tce;电力、水泥、造纸、炼铁、焦炭、炼钢和铁合金7个行业部门2011-2015年累计淘汰落后产能净能源节约量之和占到20个行业部门净能源节约量的90%;河北省、山东省和山西省淘汰落后产能能源节约量最为突出,占全部能源节约量的近28%。     

地磁房湿度对地磁观测的影响及解决方案

地磁房湿度变化较快或过大都易引起地磁数据的异常变化,且室内湿度不易控制,地磁房、磁通门磁力仪探头湿度智能在线分析监控系统,可以实时显示监控地磁房、磁通门磁力仪探头湿度的变化,超过湿度阈值则发出报警信号,进而可以采用科学的方法控制探头观测环境的湿度,提高观测数据的稳定性、可靠性。本文介绍了该系统的设计思路和主要功能。     

Biological risk and pollution history of polycyclic aromatic hydrocarbons (PAHs) in Nansha mangrove,South China

Chinese government has taken various measures to alleviate pollution caused by polycyclic aromatic hydrocarbons (PAHs) in the region of Pearl River Delta since the economic reform in 1978, but the effectiveness of these measures remains largely unknown. This study aimed to elucidate the biological risk and pollution history of PAHs by measuring the concentrations of 28 PAHs in the surface and core sediments, respectively, in Nansha mangrove. Results found that the biological risk of PAHs was low without obvious spatial variation. The PAH concentration along the depth gradient indicated that PAH pollution was stabilized since the early 1990s while the source of PAHs has gradually changed from combustion of coal to petroleum products. This implied that the mitigation measures taken by the Chinese government were effective. Compared to marine bottom sediment, we propose that using mangrove sediment can provide a more accurate and precise estimate of pollution history of PAHs.     

BIOB: A mathematical model for the biodegradation of low solubility hydrocarbons

Modeling oil biodegradation is an important step in predicting the long term fate of oil on beaches. Unfortunately, existing models do not account mechanistically for environmental factors, such as pore water nutrient concentration, affecting oil biodegradation, rather in an empirical way. We present herein a numerical model, BIOB, to simulate the biodegradation of insoluble attached hydrocarbon. The model was used to simulate an experimental oil spill on a sand beach. The biodegradation kinetic parameters were estimated by fitting the model to the experimental data of alkanes and aromatics. It was found that parameter values are comparable to their counterparts for the biodegradation of dissolved organic matter. The biodegradation of aromatics was highly affected by the decay of aromatic biomass, probably due to its low growth rate. Numerical simulations revealed that the biodegradation rate increases by 3–4 folds when the nutrient concentration is increased from 0.2 to 2.0 mg N/L.