南极无冰区典型沉积环境石英砂表面结构特征及其在沉积环境识别中的应用

本文利用电镜扫描方法 (SEM)对比分析了南极乔治王岛无冰区海滩沉积、冰碛物以及阿德雷岛湖泊沉积等典型沉积环境中的石英砂表面结构特征 ,得出了乔治王岛各典型沉积环境中石英砂表面结构特征的颗粒频率曲线。结果表明 :不同沉积环境下的石英砂颗粒表面结构特征具有相似性 ,这主要和南极地区广泛发育的冰川作用有关 ,同时 ,它们也有各自典型的特征组合 ,这些典型特征组合的不同反映了石英砂后期的搬运历史和沉积环境的差异。本文还依据石英砂表面特征的颗粒出现频率 ,利用聚类分析方法对研究区内三级海岸阶地上的沉积物和一个未知成因的样品进行了沉积环境的判别分析 ,结果证明石英砂微形貌特征可以作为南极地区沉积环境识别的有效手段     

天山1号冰川厚度和冰下地形探测与冰储量分析

通过对天山乌鲁木齐河源 1号冰川的雷达回波探测 ,清晰地揭示出冰川底部冰 /岩界面的位置及其起伏变化特征 ,显示出雷达波对山地冰川良好的穿透能力和对冰下地形的高分辨能力 ,冰川雷达测厚的误差小于 1 .2 %。研究结果显示 ,1号冰川东支冰川平均厚度为 5 8.77m ,西支冰川平均厚度为 44.84m ,冰体厚度最大值发育于冰川中部趋于主流线位置。冰川冰储量计算表明 ,东支冰储量为 0 .0 5 1 868km3,西支冰储量为 0 .0 2 0 2 1 0km3。表面和底部地形有明显差异 ,主要因冰川动力过程对基岩强烈的地貌作用所致 ,意味着冰床的起伏地形对冰川浅层冰体的运动过程影响不显著。     

The Role of Organic Matter During Metal Enrichment in Permian Kupferschiefer of the Rudna Mine,Southwest Poland

The bulk composition of organic matter and saturated and aromatic hydrocarbons extracted from 16 samples collected from two Kuperschiefer profiles in the Rudna mine,Southwest Poland has been analyzed to study the role of organic matter during base metal enrichment in the Kupferschiefer shale.The results indicated that the extract yields and saturated hydrocarbon yields decreased with increasing base metal contents.GC and GC/MS analyses indicated that n -alkanes and alkylated aromatic compounds were depleted and may have served as hydrogen donators for thermochemical sulfate reduction.The enrichment of base metal is closely connected with the destruction of hydrocarbons.     

滨里海盆地的岩相古地理特征及其演化

滨里海盆地内充填了巨厚的古生代、中生代和新生代沉积物。在剖面上可分为三套地层组合，即盐下层系、含盐层系和盐上层系。盐下层系为下古生界-下二叠统，包括巨厚的碎屑岩和碳酸盐岩沉积，在泥盆纪-早二叠世，滨里海盆地周缘广大地区普遍发育碳酸盐岩，在许多古隆起上还发育生物礁体，说明这一时期盆地的滨、浅海地带具有浅、清、暖的沉积环境，盆外陆源碎屑供应较少。含盐层系为下二叠统上部孔谷阶。早二叠世中-后期由于持续构造抬升，盆地气候变得干旱，海水变浅，潮上带蒸发环境发育，以致这一时期广泛发育盐类沉积，形成含盐层系，主要由盐岩和硬石膏层构成，并形成许多大小不等的盐丘构造。盐上层系为上二叠统-第四系。晚二叠世-三叠纪盆地又经历了一次大的海侵，为浅海陆棚环境，局部为海陆过渡三角洲相。侏罗纪-白垩纪在总的浅海陆棚环境下，盆地不同地区也形成了湖泊和瀉湖环境。晚二叠世以后形成的盐上层系沉积，主要为碎屑岩，在局部地区有碳酸盐岩。     

辽西朝阳盆地早白垩世一新的无齿翼龙化石

采自辽西朝阳盆地早白垩世九佛堂组的一翼龙化石被记述。化石材料是一接近完整骨架的无齿的翼龙，带有一不完全的头骨。作者将其归于翼手龙类(Pteroclactyloidea)，并建一新属、新种一无齿吉大翼龙(Jidapterus edentus gen．et sp．nov．)。     

鞍山市铁矿矿山地质灾害形成条件及对策研究

矿山地质灾害较其它地质灾害相比有其独特性。在鞍山铁矿区，排土场沉降不仅与采矿引起的地下水位下降有直接的联系，还与松散细粒土层、活动断裂有关；滑坡、泥石流地质灾害与地形地貌、水源条件及构造有一定的关系，更重要的是采矿活动产生的废石废渣为其提供了大量的物源；尾矿库灾害主要表现为：洪水漫顶、尾矿砂液化破坏、尾矿坝渗漏及管涌溃堤、尾矿坝滑塌破坏等。本文简要分析了鞍山市铁矿山主要存在的地质灾害类型(排土场地面沉降、滑坡、泥石流及尾矿库地质灾害)和形成条件并提出了防治地质灾害的对策。     

马来西亚沙捞越邦达、什兰江控矿角砾岩筒构造对比研究及其找矿意义

马来西亚沙捞越邦达、什兰江控矿角砾岩筒构造均为典型的浅成—半浅成角砾岩筒构造，角砾岩及控矿类型具有明显的垂向分带特点。邦达控矿角砾岩筒构造发育角砾岩筒上段的塌陷角砾岩，角砾岩筒剥蚀深度较浅，控制典型的高硫化型浅成低温金铜矿床，且其深部具有较大的找矿潜力。什兰江控矿角砾岩筒构造发育角砾岩筒下段的爆发角砾岩和中段的流化角砾岩，分别控制斑岩型金矿化和低硫化型浅成低温热液型金矿化，角砾岩筒剥蚀深度较大，对矿床的保存和找矿极为不利。     

Effect of asymmetry and irregularity of seismic waves on earthquake-induced differential settlement of buildings on natural subsoil

The effect of asymmetry and irregularity of the inputted seismic waves on the earthquake-induced differential settlement of the buildings on natural subsoil is investigated in terms of the earthquake damage phenomena, theoretical analyses, dynamic triaxial tests and shaking table tests. A conclusion can be drawn from the investigation results that, the asymmetrical and irregular character of the inputted seismic waves themselves may have a significant contribution to the differential settlement of subsoil and buildings in some cases, and this is a necessary factor to be considered in reasonable evaluation for the differential settlement and other problems relating to the soil deformation due to earthquakes.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.