Deepwater Ventilation and Stratification in the Neogene South China Sea

Combined data of physical property, benthic foraminifera, and stable isotopes from ODP Sites 1148, 1146, and 1143 are used to discuss deep water evolution in the South China Sea (SCS) since the Early Miocene. The results indicate that 3 lithostratigraphic units, respectively corresponding to 21-17 Ma, 15-10 Ma, and 10-5 Ma with positive red parameter (a*) marking the red brown sediment color represent 3 periods of deep water ventilation. The first 2 periods show a closer link to contemporary production of the Antarctic Bottom Water (AABW) and Northern Component Water (NCW), indicating a free connection of deep waters between the SCS and the open ocean before 10 Ma. After 10 Ma, red parameter dropped but stayed higher than the modern value (a*=0), the CaCO3 percentage difference between Site 1148 from a lower deepwater setting and Site 1146 from an upper deepwater setting enlarged significantly, and benthic species which prefer oxygen-rich bottom conditions dramatically decreased. Coupled with a major negative excursion of benthic δ13C at ~10 Ma, these parameters may denote a weakening in the control of the SCS deep water by the open ocean. Probably they mark the birth of a local deep water due to shallow waterways or rise of sill depths during the course of sea basin closing from south to east by the west-moving Philippine Arc after the end of SCS seafloor spreading at 16-15 Ma. However, it took another 5 Ma before the dissolved oxygen approached close to the modern level. Although the oxygen level continued to stabilize, several Pacific Bottom Water (PBW) and Pacific Deep Water (PDW) marker species rapidly increased since ~6 Ma, followed by a dramatic escalation in planktonic fragmentation which indicates high dissolution especially after ~5 Ma. The period of 5-3 Ma saw the strongest stratified deepwater in the then SCS, as indicated by up to 40% CaCO3 difference between Sites 1148 and 1146. Apart from a strengthening PDW as a result of global cooling and ice cap buildup on northern high latitudes, a deepening sea basin due to stronger subduction eastward may also have triggered the influx of more corrosive waters from the deep western Pacific. Since 3 Ma, the evolution of the SCS deep water entered a modern phase, as characterized by relative stable 10% CaCO3 difference between the two sites and increase in infaunal benthic species which prefer a low oxygenated environment. Thesubsequent reduction of PBW and PDW marker species at about 1.2 Ma and 0.9 Ma and another significant negative excursion of benthic δ13C to a Neogene minimum at ~0.9 Ma together convey a clear message that the PBW largely disappeared and the PDW considerably weakened in the Mid-Pleistocene SCS. Therefore, the true modern mode SCS deep water started to form only during the "Mid-Pleistocene climatic transition" probably due to the rise of sill depths under the Bashi Strait.     

我国省域工业主导产业的遴选与发展

工业主导产业在国民经济发展中起着决定性和指向性的作用.主导产业的选择是经济发展阶段的重要课题.依据6个量化指标,从4个维度对“十一五”期间主导产业进行遴选,发现以能源及相关产业为代表的重化工业是各省的重点,高新技术产业成为主导产业的省份较少,劳动密集型产业依然是东部发达省市的重点,预期中的产业转移并未实现;以行业为变量对各省份的主导产业进行聚类分析,可将31个省份划分为5类,反映了我国各省份主导产业布局特点;在此基础上,依据产业生命周期理论和各地区“十二五”发展趋势,提出了相应的对策建议.     

Comprehensive analysis control effect of faults on the height of fractured water-conducting zone in longwall mining

Natural Hazards - In order to examine the height of a fractured water-conducting zone due to the presence of a fault, a typical working face in the Baodian Coal Mine which is located in the Yanzhou...     

新媒体时代基于政务微博新平台建设服务型政府浅议

作为社会化媒体的重要类型,微博已经成为继新闻网站、论坛、博客之后,网络舆论生成的主要载体,＂微博问政＂成为热点和趋势,政务微博也成为政府信息公开、发布权威信息、提供公共服务、加强政民互动、引导网络舆论的重要平台。随着政务微博的快速发展,一系列新问题、新挑战也逐步显现。本文结合国土资源部政务微博的现状,就如何使用政务微博为民服务,提高政务微博应用水平,促进政务微博的健康发展,提升政府公信力,提出了对策建议。     

The effect of volatile components in oil on evolutionary characteristics of diamondoids during oil thermal pyrolysis

On the basis of the results of simulation experiments, now we better understand the contribution of high carbon number hydrocarbons to diamondoid generation during thermal pyrolysis of crude oil and its sub-fractions(saturated, aromatic, resin, and asphalene fractions). However, little is known about the effect of volatile components in oil on diamondoid generation and diamondoid indices due to the lack of attention to these components in experiments. In this study, the effect of volatile components in oil on diamondoid generation and maturity indices was investigated by the pyrolysis simulation experiments on a normal crude oil from the HD23 well of the Tarim Basin and its residual oil after artificial volatilization, combined with quantitative analysis of diamondoids. The results indicate that the volatile components(≤n C12) in oil have an obvious contribution to the generation of adamantanes, which occurs mainly in the early stage of oil cracking(Easy Ro1.0%), and influences the variations in maturity indices of adamantanes; but they have no obvious effect on the generation and maturity indices of diamantanes. Therefore, some secondary alterations e.g., migration, gas washing, and biodegradation, which may result in the loss of light hydrocarbons in oil under actual geological conditions, could affect the identification of adamantanes generated during the late-stage cracking of crude oil, and further influence the practical application of adamantane indices.     

Tectonic evolution of the Late Paleozoic Early Mesozoic orogenic belt in the eastern segment of the northern margin of the North China Block: Evidence from meta volcanic rocks of Jianshanzi,northern Liaoning ProvinceSCIEI北大核心CSCD

LA-ICP-MS U-Pb dating, whole -rock geochemistry and Hf isotopic analyses for the Jianshanzi volcanic rocks in the Kaiyuan area are presented to explore the Late Paleozoic -Early Mesozoic tectonic evolution history of the eastern segment of the northern margin of the North China block. The detailed research indicates that the protolith of Jianshanzi metamorphic volcanic rocks includes rhyolite, dacite and andesite, they are calc-alkaline series and metaluminous-weak peraluminous rocks. According to the zircon U-Pb dating, the metamorphic rhyolite and metamorphic andesite formed in the Late Permian (256. 1 +/- 1. 5Ma, 252.4 +/- 1. 7Ma) and the Late Triassic (222. 4 +/- 1. 8Ma, 227. 9 +/- 1. 2Ma), respectively. They are characteristized by enrichment in light rare earth elements and large ion lithophile elements, and depletion of heavy rare earth elements and high field strength elements. Metamorphic rhyolite has an obvious negative Eu anomaly with epsilon(Hf) ( t) values of 10. 83 + 8. 10 and the second -stage model are 698 similar to 1967Ma. They are mainly due to the partial melting of the juvenile basaltic lower crust and the contamination of a small amount of ancient crustal materials. Metamorphic andesite has no obvious Eu anomaly, and the epsilon(Hf)( t) value and the second -stage model are +4.54 similar to + 6. 79 and 825 similar to 968 Ma, which may be the product of partial melting of basic lower crust. There are two periods of magmatism in Jianshanzi volcanic rocks: Late Permian -Early Triassic (247 similar to 256Ma) and Late Triassic (similar to 225Ma). The material composition of the Jianshanzi volcanic rocks is characterized by different times and different tectonic backgrounds. It is comprehensively believed that the eastern segment of the northern margin of the North China block was in an active continental margin tectonic environment during the Permian, and the Palaeo-Asian Ocean subducted in both directions; Mantle -derived magma ascends and emplaces, forming a nascent crust and causing crustal thickening. The Paleo-Asian Ocean finally closed in the early Middle Triassic, and the impact of collisional orogeny may have continued until the early Late Triassic.     

Precise positions of Phoebe determined with CCD image-overlapping calibration

This paper presents 210 positions of Phoebe, the ninth satellite of Saturn, observed with the 1-m telescope at the Yunnan Observatory during the years 2003–2005, using a CCD image-overlapping calibration method proposed recently by Peng et al. After the observed positions of Phoebe are compared with its theoretical positions computed by the new JPL ephemerides DE405 and SAT199, the mean residuals (observed minus computed) are 0.21 and −0.05 arcsec in right ascension and declination, respectively, with a standard deviation of 0.06 arcsec.     

Laboratory investigation of hydraulic fracture propagation using real-time ultrasonic measurement in shale formations with random natural fractures

The significance of natural fractures in unconventional shale hydrocarbon formations has opened new research frontiers in hydraulic fracturing. Among many of its unique contributions to gas production, the interaction between natural fractures and hydraulic fractures has long been experimentally and computationally investigated. Here, we experimentally investigated the evolution of the fracturing network with a self-developed ultrasonic testing system. Laboratory experiments are proposed to study the propagation of hydraulic fracture in naturally fractured model blocks that contain random micro-fractures. Our analysis suggests that the total fracture width obtained by ultrasonic pulse velocity (UPV) can reflect the dynamic evolution of the fracturing network. The nonlinear fracturing network evolution process is closely related to the variation of the total fracture width. It is suggested from the total fracture width that the maximum fracture network can be realized with greater natural fracture density, large injection rate, and smaller stress ratio. The study presents a better insight into the response of random naturally fractured shale formation under hydraulic fracturing treatment by analyzing the variation of UPV in real time.     

Local normal height connection across sea with ship-borne gravimetry and GNSS techniques

Heights as the basic geographical information are very important to study marine geophysics, geodesy and oceanography. Based on the astronomical leveling principle, we put forward a new method to unify the normal height (NH) datum along one ship route across sea with the ship-borne gravimetry and global navigation satellite system (GNSS) techniques. Ship-borne gravimeter can precisely measure gravity anomalies and the GNSS technique is used to measure precise sea surface heights (SSHs) along the ship track across sea. Precisions of ship-borne gravities and SSHs are improved with the colinear adjustment. To remove the effects of sea wave and wind, the Gaussian filter is used to filter residuals both between the ship-borne and modeled gravities from EGM2008 to degree 2160, and the measured and modeled SSHs from DTM10MSS, respectively. Deflections of the vertical (DOVs) along the ship route are estimated from the measured gravities with the least squares collocation method. The astro-geodetic survey is made on continent and island to improve the accuracy of DOVs along the route. We use the new method to connect NHs on the coastal sea of Shandong Peninsula, China. The results indicate that the method is very efficient to precisely connect the NH along the ship route across sea.     

Applying image recording and identification for measuring water stages to prevent flood hazards

Information on river stages can be transmitted to relevant management offices over a network by using an automatic stage gauge so that management offices can effectively evaluate whether a river stage is exceeding the warning line and take action if necessary. However, current river stage measurement methods can present this information only in data form because the methods cannot simultaneously obtain images such as the rising or overflow of the river stage. In addition, the stage gauge can fail or be washed away when the river stage is high. To solve these problems, this research evaluates a novel measurement method involving a video surveillance system that exhibits features such as easy installation, low maintenance cost, and low failure possibility. Through on-site image recording, this measurement method involves using image identification technology to read water level figures automatically. This method offers instant river stage figures and on-site video so that disaster prevention measures can be implemented accordingly. The results of a dynamic water flow test conducted in an indoor experimental channel indicated that all of the average absolute error levels of river stage identification were less than ±1.2 %, meaning that the image identification technology could achieve identification results at any flow level. By contrast, the findings of a rainfall simulation experiment suggest that the average absolute error of river stage identification was less than ±2.5 %, meaning that the measurement technology and method used in this research are useful and feasible at various rainfall intensities.