The solar wind and the Sun–Earth link

Plasma streams out from the Sun in the form of the solar wind. Shadia Rifai Habbal and Richard Woo examine the workings of this enigmatic link between the Earth and the Sun.     

Mid‐Miocene initiation of E‐W extension and recoupling of the Himalaya

The Tibetan plateau is host to numerous ~N‐S striking graben that have accommodated E‐W directed extension. The development of these structures has been interpreted to reflect a variety of different geological processes including plateau collapse, oroclinal bending or mid‐to‐lower crustal flow. New ⁴⁰Ar/³⁹Ar thermochronology and quartz c‐axis data from the Thakkhola graben of west‐central Nepal show that E‐W extension was ongoing at least locally by the early Miocene (ca. 17 Ma). Our new, and previously published chronologic information on the initiation of graben across the orogen shows that they typically developed immediately after cessation of the South Tibetan detachment system, a structural network that facilitated differential southward movement of the upper and middle crust. We interpret this fundamental switch in orogen kinematics to reflect recoupling of the middle and upper Himalayan crust such that the subsequent widespread flow of the mid‐to‐lower crust out of the system to the east forced brittle accommodation in the upper crust.     

江苏沿海高速公路低能见度浓雾的气候特征和影响因子研究

文章对2012年6月至2014年6月期间发生于江苏省沿海高速公路的浓雾过程(能见度0.5 km)进行统计分析,探讨了低能见度浓雾的气候特征、气象要素变化以及主要环流形势背景。研究结果表明:(1)低能见度浓雾月分布次数有显著差异,3-6月、12月至次年2月雾发生次数最高,春、冬季高于夏、秋季;03:00-05:00为低能见度生成的高峰时段,08:00左右为消散峰值时段。(2)能见度低于0.5 km后,如果相对湿度继续增大到97%左右、温度处于0~4℃、风速在0~2 m·s~(-1)、风向在ENE-SSE,能见度可能继续下降到0.2 km以下。(3)对150366个样本的环流背景统计分析表明,中北部路段的低能见度天气大多数是由锋前雾引起的,主要出现在中低层暖区域内,地面为冷锋前部弱气压场的环流条件下。全路段大面积低能见度天气由辐射雾和平流雾造成,辐射雾天气形势主要是高层为下沉气流,配合地面受弱高压或高压南下;平流雾出现在中低层暖性系统,地面位于入海高压后部或低压倒槽东侧,低层盛行偏东风或东南风。(4)"象鼻型"先期振荡现象适用于沿海高速公路低能见度预报过程,尤其对能见度稳定维持0.2 km以下的浓雾过程有很好的预警和监测作用。     

Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.     

The Juchatengo complex: an upper-level ophiolite assemblage of late Paleozoic age in Oaxaca,southern Mexico

International Journal of Earth Sciences - The Juchatengo complex (JC) suite is located between the Proterozoic Oaxacan complex to the north and the Xolapa complex to the south, and was amalgamated...     

Assessment of the acid drainage neutralization capacity and the toxic metals lixiviation of tailing from Guanajuato mining district,Mexico

In Mexico, many environmental problems are generated by large mining activities taking place in several mining districts. These mining activities produce great quantities of residues; large majorities of these have high sulfur content, which could generate acid drainage due to their interaction with the oxygen in the environment. The study area was located in the Mining District of Guanajuato, Mexico with abandoned tailings generated mainly by the gold and silver production. Two areas, called as Monte de San Nicolás (SN) and Peregrina (P) were selected for this study. The results study shows that there was no risk of production of acid drainage, since these tailings contained high amount of carbonates, which neutralized the generation of acidity and consequently decreased the possibility of leaching of some elements. However, not all elements leach in acid pH, as arsenic bound to oxyhydroxides, which is in a basic environment and its increased release by increasing the pH.     

Estimating urban above ground biomass with multi-scale LiDAR

Background

Urban trees have long been valued for providing ecosystem services (mitigation of the “heat island” effect, suppression of air pollution, etc.); more recently the potential of urban forests to store significant above ground biomass (AGB) has also be recognised. However, urban areas pose particular challenges when assessing AGB due to plasticity of tree form, high species diversity as well as heterogeneous and complex land cover. Remote sensing, in particular light detection and ranging (LiDAR), provide a unique opportunity to assess urban AGB by directly measuring tree structure. In this study, terrestrial LiDAR measurements were used to derive new allometry for the London Borough of Camden, that incorporates the wide range of tree structures typical of an urban setting. Using a wall-to-wall airborne LiDAR dataset, individual trees were then identified across the Borough with a new individual tree detection (ITD) method. The new allometry was subsequently applied to the identified trees, generating a Borough-wide estimate of AGB.

Results

Camden has an estimated median AGB density of 51.6 Mg ha^–1 where maximum AGB density is found in pockets of woodland; terrestrial LiDAR-derived AGB estimates suggest these areas are comparable to temperate and tropical forest. Multiple linear regression of terrestrial LiDAR-derived maximum height and projected crown area explained 93% of variance in tree volume, highlighting the utility of these metrics to characterise diverse tree structure. Locally derived allometry provided accurate estimates of tree volume whereas a Borough-wide allometry tended to overestimate AGB in woodland areas. The new ITD method successfully identified individual trees; however, AGB was underestimated by ≤?25% when compared to terrestrial LiDAR, owing to the inability of ITD to resolve crown overlap. A Monte Carlo uncertainty analysis identified assigning wood density values as the largest source of uncertainty when estimating AGB.

Conclusion

Over the coming century global populations are predicted to become increasingly urbanised, leading to an unprecedented expansion of urban land cover. Urban areas will become more important as carbon sinks and effective tools to assess carbon densities in these areas are therefore required. Using multi-scale LiDAR presents an opportunity to achieve this, providing a spatially explicit map of urban forest structure and AGB.

     

Accurate ionospheric delay model for real-time GPS-based positioning of LEO satellites using horizontal VTEC gradient estimation

Ionospheric delays compensation is a mandatory step for precise absolute and relative positioning of Low Earth Orbit Satellites (LEO) by GPS measurements. The most frequently used ionosphere model for real-time GPS-based navigation in LEO is an isotropic model proposed by Lear, which uses the Vertical Total Electron Content (VTEC) above the receiver and a mapping function for TEC evaluation along a given ray path. Based on significant assessed results available for ground-based GPS receivers, we propose the use of a different model relying on the thin shell assumption and a bilinear horizontal variation of the VTEC as a function of latitude and longitude in the shell. It is expected that this model is capable of better describing horizontal gradients in the ionosphere, thus improving ionospheric delay estimation, especially in intense ionospheric conditions. This model is referred to as Linear Thin Shell (LTS). LTS performance in estimating undifferenced and double-differenced ionospheric delays is checked by comparing measured and predicted delays computed using flight data from the GRACE mission. Results show that the LTS always outperforms the isotropic model, especially in case of high solar activity. Moreover, the LTS model provides a higher performance uniformity over a wide range of ionospheric delays, thus ensuring good performance in different conditions. The results obtained demonstrate that the LTS model improves the ionosphere delays estimation accuracy by 20 and 40% for undifferenced and double-differenced delays, respectively. This suggests the LTS model can effectively contribute to improving precision in LEO positioning applications.     

Analysis of stratigraphical sequences at Cocina Cave (Spain) using rare earth elements geochemistry

This study investigates the stratigraphical sequence of Cocina Cave (Spain) employing and testing for the first time the capability of rare earth elements as markers of human activities in caves. Located in Dos Aguas (Valencian Community, Spain), Cocina Cave is characterized by the presence of several Holocene archaeological deposits from the final Mesolithic to the present day and is a pivotal site for understanding the socio-ecological dynamics of the last hunter-gatherer inhabitants of the Iberian Peninsula and the transition to pastoral and agricultural economies in the Western Mediterranean. However, the identification of strata from particular time-periods in the cave is often difficult due to the homogeneity of layers, the poor archaeological record in some strata and the presence of severe disturbance phenomena. The methodological approach of this study consisted of cross-referencing rare earth elements and other chemical markers with the archaeological stratigraphical interpretation, in an attempt to not only support the identification of the anthropic contribution to the formation of Cocina Cave strata, but also to characterize and confirm different natural and occupational episodes, particularly those associated with hunter-gatherer, early agriculturalist, and shepherd activities. Sediments were collected from different excavation areas and analysed for major elements, trace elements, rare earth elements (REE), soil organic matter (SOM) amounts and pH. Multivariate statistics were employed to group samples according to their elemental profile, and these were then compared to the archaeological temporal interpretation. The obtained results showed that REE amount and fractionation geochemical processes were regulated by carbonates, phosphates and pH. The use of REE as markers was particularly useful as their concentrations and their calculated ratios and anomaly distributions were demonstrated to be highly consistent with the archaeological stratigraphical interpretation.