Land-surface scheme validation using the Oklahoma Atmospheric Surface-layer Instrumentation System (OASIS) and Oklahoma Mesonet data: Preliminary results

Summary The Oklahoma Atmospheric Surface-layer Instrumentation System (OASIS) is a recently-developed observational system that collects, archives, and quality controls atmospheric, surface, and soil data in real-time from 90 stations across Oklahoma. Ten of the 90 sites, termed “super sites”, are equipped with additional sonic anemometry and four-component net radiometers to provide complete observations of the surface energy balance. Oklahoma Mesonet and OASIS data are used in this study to validate the sensitivity and accuracy of a land-surface scheme within a numerical prediction model. The Advanced Regional Prediction System (ARPS) is a three-dimensional, nonhydrostatic mesoscale model developed by the Center for Analysis and Prediction of Storms (CAPS) at the University of Oklahoma. The land-surface model (LSM) used within ARPS is the Interactions Soil Biosphere Atmosphere (ISBA) scheme. Mesonet and OASIS data collected from the super site located in Norman, Oklahoma, are used as verification for the ISBA. Research presented in this study outlines the challenges in developing, maintaining, and using in-situ data for model validation. Such problems as instrument error, surface heterogeneity, and non-closure of the surface energy budget limit data accuracy. Preliminary results of model validation focus on the sensitivity of the soil physics within the ISBA scheme. Model sensitivity to vegetation cover, surface roughness, and soil type are investigated. Furthermore, several recent improvements to ISBA are evaluated and compared to observations. This study concludes that the sensitivity of the ISBA to a priori soil and vegetation type is detrimental for this scheme to be used in a mesoscale model without improved treatment of surface heterogeneity. Received November 18, 2001 Revised December 28, 2001     

Late Cretaceous reactivation of major crustal shear zones in northern Namibia: constraints from apatite fission track analysis

Namibia's passive continental margin records a long history of tectonic activity since the Proterozoic. The orogenic belt produced during the collision of the Congo and Kalahari Cratons in the Early Proterozoic led to a zone of crustal weakness, which became the preferred location for tectonism during the Phanerozoic. The Pan-African Damara mobile belt forms this intraplate boundary in Namibia and its tectonostratigraphic zones are defined by ductile shear zones, where the most prominent is described as the Omaruru Lineament–Waterberg Thrust (OML–WT). The prominance of the continental margin escarpment is diminished in the area of the Central and Northern Zone of the Damara belt where the shear zones are located. This area has been targeted with a set of 66 outcrop samples over a 550-km-long, 60-km-broad coast-parallel transect from the top of the escarpment in the south across the Damara sector to the Kamanjab Inlier in the north. Apatite fission track age and length data from all samples reveal a regionally consistent cooling event. Thermal histories derived by forward modelling bracket this phase of accelerated cooling in the Late Cretaceous. Maximum palaeotemperatures immediately prior to the onset of cooling range from ca. 120 to ca. 60 °C with the maximum occurring directly south of the Omaruru Lineament. Because different palaeotemperatures indicate different burial depth at a given time, the amount of denudation can be estimated and used to constrain vertical displacements of the continental crust. We interpret this cooling pattern as the geomorphic response to reactivation of basement structures caused by a change in spreading geometry in the South Atlantic and South West Indian Oceans.     

Numerical Homogenization of the Rigidity Tensor in Hooke's Law Using the Node-Based Finite Element Method

Combining a geological model with a geomechanical model, it generally turns out that the geomechanical model is built from units that are at least a 100 times larger in volume than the units of the geological model. To counter this mismatch in scales, the geological data model's heterogeneous fine-scale Young's moduli and Poisson's ratios have to be “upscaled” to one “equivalent homogeneous” coarse-scale rigidity. This coarse-scale rigidity relates the volume-averaged displacement, strain, stress, and energy to each other, in such a way that the equilibrium equation, Hooke's law, and the energy equation preserve their fine-scale form on the coarse scale. Under the simplifying assumption of spatial periodicity of the heterogeneous fine-scale rigidity, homogenization theory can be applied. However, even then the spatial variability is generally so complex that exact solutions cannot be found. Therefore, numerical approximation methods have to be applied. Here the node-based finite element method for the displacement as primary variable has been used. Three numerical examples showing the upper bound character of this finite element method are presented.     

Most likely locations of large earthquakes in the Kanto and Tokai areas, Japan, based on the local recurrence times

We examined the hypothesis that minima in local recurrence time, T_L, or equivalently maxima in local probability, P_L, may map asperities in the Kanto and Tokai areas of Japan, where the earthquake catalog of the National Research Institute for Earth Science and Disaster Prevention (NIED) is complete at the M=1.5 (M1.5) level. We mapped T_L (P_L) based on the a- and b-values of the nearest earthquakes within 20 km of every node of a grid spaced 0.01° for M7 target events. Only earthquakes within the top 33 km were used. The b-values increase strongly with depth, in several areas. Therefore, some of the T_L (P_L) anomalies are not revealed if data from the entire crustal seismogenic zone are mixed. Thus, we mapped T_L (P_L) separately for the top 15 km and the rest of the depth range, as well as for the entire seismogenic crust. The resulting T_L- and P_L-maps show that approximately 12% of the total area shows anomalously short recurrence times. Out of six shallow target events with M≥6.5 and which occurred since 1890, five are located within the anomalous areas with T_L <450 years. We interpret this to mean that areas with anomalously short T_L map asperities, which are more likely than other areas to generate future target events. The probability that this result is due to chance is vanishingly small. The great Kanto rupture of 1923 appears to have initiated in the most significant asperity we mapped in the study area. One anomaly is located in the northeastern part of the area of the proposed future rupture of the Tokai earthquake, and another one at its southwestern corner. The absolute values of T_L calculated are uncertain because they depend on the size of the volume used for the calculation.     

Experimental determination of the solubility of Au in silicate melts

Summary We report here new data on the solubility of Au in silicate melts of anorthite-diopside eutectic composition at a wide range of oxygen fugacities, from pure oxygen to 10^–8 atm, and at a temperature range of 1300 °C to 1480 °C. Because experiments were done with metal loops at temperatures above the Au-melting temperature, PdAu-metal-alloys had to be used. Pd-solubility data derived from the same set of experiments agree with earlier data obtained from experiments with pure Pd-metal (Borisov et al., 1994a). The results of the present experiments show that Pd-solubilities are by a factor of 2 to 6 higher than Au-solubilities. Both, Au and Pd solubilities decrease with decreasing oxygen fugacity. At oxygen fugacities below the iron-wiistite buffer (IW) Au solubility increases with decreasing fO₂ probably reflecting formation of Au-silicides at such reducing conditions. Compared to Pd, Au has higher activity coefficients in Fe-metal and lower solubility in silicate melts. This leads to similar metal-silicate partition coefficients for both elements. At a temperature of 1350 °C and an oxygen fugacity corresponding to IW-2 D^Au (met/sil) is about 2.5 · 10⁷ and D^Pd (met/sil) about 1.6 · 10⁷. Thus similar behavior is expected during metal separation in planetary bodies including core formation in the Earth. The metal/silicate partition coefficient of Ir is, however, by several orders of magnitudes higher (Borisov and Palme, 1995a). Equilibration with chondritic metal will therefore lead to grossly non-chondritic Pd/Ir or Au/Ir ratios in coexisting silicate phases. Chondritic ratios are thus indicative of the presence of unfractionated meteoritic components. Samples from the upper mantle of the Earth, for example, reflect the admixture of a late unfractionated (chondritic) veneer (e.g.,Kimura et al., 1974;Jagoutz et al., 1979).Solubilities of Pd and Au in silicate melts are much higher than the contents in terrestrial basalts implying that the abundances of these two elements are not buffered by residual PGE- and Au-containing alloys. The most likely process for fractionating PGEs in terrestrial magmas are mineral-melt (e.g., olivine/melt) equilibria.

---

Experimentelle Bestimmung der Löslichkeit von Au in Silikatschmelzen

Zusammenfassung In der vorliegenden Arbeit wird über die Ergebnisse der Bestimmung der Löslichkeit von Au in Silikatschmelzen mit der Zusammensetzung des Anorthit-Diopsid Eutektikums berichtet. Die Versuche wurden mittels Metallschlaufe über einen weiten Sauerstoffpartialdruckbereich, von reinem Sauerstoff bis zu 10^–8 atm und in einem Temperaturbereich von 1300 °C bis 1480 °C, durchgeführt. Da diese Temperaturen jedoch den Au-Schmelzpunkt überschreiten, wurde mit AuPd-Legierungen gearbeitet. Die Ergebnisse der dadurch zusätzlich erhaltenen Pd-Versuche stimmen mit früher bestimmten, mit reinen Pd-Schlaufen durchgeführten Pd-Löslichkkeiten überein (Borisov et al., 1994a). Die auf reine Metalle zurückgerechneten Löslichkeiten von Pd sind um einen Faktor 2 bis 6 mal höher als die entsprechenden Au-Löslichkeiten. Die Löslichkeiten beider Metalle nehmen mit abnehmendem Sauerstoffpartialdruck ab. Unter noch stärker reduzierenden Bedingungen (Eisen-Wüstit Gleichgewicht) nimmt die Löslichkeit von Au jedoch zu. Dies könnte auf die Bildung von Au-Siliziden zurückzuführen sein.Im Vergleich zu Pd sind die Aktivitätskoeffizienten von Au in metallischem Eisen höher, die Löslichkeiten in Silikatschmelzen jedoch niedriger. Das führt zu ähnlichen Metall/Silikat Verteilungskoeffizienten von Au und Pd. Bei einer Temperatur von 1350 °C und einer Sauerstoffugazität von IW-2 ergeben sich für D^Au (met/sil) 2.5 · 10⁷ und für D^Pd (met/sil) 1.6* 10⁷. Der Metall/Silikat-Verteilungskoeffizient von Ir ist jedoch unter den gleichen Bedingungen um mehrere Größenordnungen höher (Borisov andPalme, 1995a). Ein chondritisches Pd/Ir- oder Au/Ir-Verhältnis kann also auf die Anwesenheit einer unfraktionierten chondritischen Komponente zurückgeführt werden. Dies gilt beispielsweise für Proben aus dem oberen Erdmantel. Hier handelt es sich vermutlich um Zumischung einer späten chondritischen Akkretionskomponente, die sich nicht mehr mit einer metallischen Phase (Kern) ins Gleichgewicht gesetzt hat (z.B.Kimura et al., 1974,Jagoutz et al., 1979).Die Löslichkeiten von Pd und Au in Silikatschmelzen sind wesentlich höher als ihre Gehalte in basaltischen und komatiitischen Laven. Dies bedeutet, daß Au und Pd in Schmelzen aus dem Erdmantel nicht durch residuale Au- und/oder Pd-haltige Metall phasen bestimmt sind. Gleichgewichte zwischen Schmelze und Mineralen (z.B. Olivin) sind die wahrscheinlichsten Fraktionierungsmechanismen für Platingruppenelemente in terrestrischen Magmen.

---

---

With 5 Figures     

Policy concerns in Bulgarian food distribution

The Bulgarian food distribution system, like those of its Central and East European neighbours, lags behind the West in critical performance areas. Previous research quantified Central and East European food distribution deficiencies on the basis of a five factor model. This study investigates the attitudes of 250 Bulgarian consumers using these same five factors: food processing, quality, cost, availability and retailing. The findings show that the Bulgarian food distribution system does not satisfy consumer wants as well as do systems in other former communist countries in four of the five factors. At the same time, Bulgarian consumers are more satisfied than UK and US consumers in the system's ability to make some foods available. The study also shows that Bulgarian consumers who use privatised shops perceive the system more positively than those who use state and cooperative outlets. The implications of these and other findings are discussed in terms of critical policy concerns for government and industry stakeholders.     

Witwatersrand iron-formations and their significance for gold genesis and the composition limits of orthoamphibole

Summary In the West Rand Group of the 3.07–2.71 Ga old Witwatersrand Supergroup, South Africa, a series of banded iron-formations occur. They are of chemical origin and were deposited in an offshore shelf environment. The coarser-grained, in places pyrite-bearing, and partly auriferous metasedimentary rocks forming the bulk of the Witwatersrand Supergroup are regressive. The iron-formations, however, were deposited during transgression. The presence of allogenic pyrite in the fluviatile metaconglomerates and that of magnetite and, in places, haematite in the marine iron-formations suggests a lower pH and higher sulfur activity for the Archaean meteoric environment than for recent hydrothermal fluids on the ocean floor. Post-depositional alteration of the Witwatersrand rocks includes burial metamorphism at temperatures between 300 and 350 °C and pressures around 2.5 kbar, and multiple hydrothermal inflitration events at slightly lower temperatures, coeval with the brittle deformation of the basin fill during the deposition of the Transvaal Supergroup and the Bushveld Vredefort events.Additional thermal metamorphic overprint of the iron-formations around the Vredefort Dome caused the growth of orthoamphiboles. They show a wide range of compositions between ferro-anthophyllite and ferrous alumino-gedrite, suggesting that the crest of the solvus curve for Fe-rich orthoamphiboles is below 500 °C.Chlorite and amphibole compositions, and the presence of Fe-oxide-bearing horizons between pyrite-bearing ones indicate that the fluid composition during post-depositional alteration was largely controlled by the bulk rock composition of the infiltrated stratigraphic horizons and not by some external source.

---

Zusammenfassung Die West Rand Group innerhalb der 3.07–2.71 Milliarden Jahre alten Witwatersrand Supergroup, Südafrika, führt eine Reihe von Magnetit- und Hämatit-haltigen Eisenformationen. Diese sind chemischen Ursprungs und wurden in einem flachmarinen Schelfmilieu abgelagert. Der überwiegende Teil der Witwatersrand Abfolge, bestehend aus klastischen, verschiedentlich Pyrit-führenden und teilweise goldhaltigen Metasedimentgesteinen, kann regressiven Phasen zugeschrieben werden. Die Eisenformationen wurden hingegen während transgressiven Phasen abgelagert. Aufgrund des Auftretens allogener Pyrite in den fluviatilen Konglomeratlagen und von Magnetit und Hämatit in den marinen Eisenformationen lassen sich für den meteorischen Bereich im Archaikum niedrigere pH-Werte und höhere Schwefelfugazität ableiten als für rezente submarine hydrothermale Fluide. Post-diagenetische Alterationsprozesse sind der Versenkungsmetamorphose mit Temperaturen zwischen 300 und 350 °C und Drucken um 2.5 kbar sowie etwas niedriger temperierten hydrothermalen Fluiden zuzuschreiben, die als Folge der inkompetenten Deformation der Beckenfüllung in diese während mehrer Stadien infiltrierten. Infiltration hydrothermaler Fluide während der Ablagerung der Transvaal Supergroup (2.55 Ga) und während des Bildung der Vredefort Struktur (2.0 Ga) sind durch Altersdaten belegt.Zusätzliche thermische Metamorphose der Fe-reichen Pelite und Eisenformationen im Bereich der Vredefort Struktur führte zur Bildung von Orthoamphibolen, deren Zusammensetzung von Anthophyllit bis zu Fe-reichem Alumino-Gedrit reicht. Dies läßt darauf schließen, daß die Solvuskurve für Fe-reiche Orthoamphibole unterhalb von 500 °C liegt.Die Zusammensetzung der Chlorite und Amphibole sowie das Auftreten von Fe-Oxid-führenden Horizonten in den generall Pyrit-reichen Metasedimentgesteinen gestatten die Annahme, daß die post-diagenetische Fluidzusammensetzung hauptsächlich durch die jeweilige Zusammensetzung der infiltrierten Gesteinshorizonte und nicht durch eine externe Quelle bestimmt wurde.

---

---

With 8 Figures     

A low plain between arcadia and agronomy: Ippolito Nievo and the Friulan landscape

An analysis of the historical and cultural context of a large number of literary works illuminates the concept of landscape, a recurrent theme in contemporary humanistic geography. In this context, the works of Ippolito Nievo present an opportunity to look closer at the socio-economic circumstances of his time while also offering suggestive interpretative elements about the attitudes held concerning the wetlands of the lower Friulan plain.