Sub-critical fracture and associated retrogression of garnet during mylonitic deformation

Garnets from the Alpine Fault mylonites are fractured. Most fractures have a retrogressive fracture fill; a small number have garnet fill. A detailed SEM study has been carried out to elucidate the mechanisms of fracture and associated retrogression. Wide fracture zones contain free floating islands of garnet in a retrogressive matrix. Electron channelling patterns show that segments of garnet across such fracture zones rarely show any relative rotations. Where rotations are observed, they are small and systematic. Some large fractures show clearly that fracture and retrogression occurs by a replacement process. Fracture surface morphologies are indicative of surface dissolution. A model is established where crack tips advance by a process of dissolution at a high stress crack tip whilst precipitation occurs as the tip and its associated stress field advance. Precipitation of retrogressive fracture fill occurs if fracture occurs out of the field of stability of garnet.     

Application of infinite slope analysis to subaqueous sediment instability,Mississippi delta

Submarine landslides are described on very low angle slopes (0.5°–1.7°) in the Mississippi prodelta area and are evaluated using infinite slope analysis. For instability to occur, pore water pressure ratios in excess of hydrostatic (u/γ_wz) and approaching geostatic (u/γ′z) are needed. These calculated values, based on three sets of effective strength parameters and for two sediment depths to failure, are in close agreement with measured pore water pressure data from in situ piezometers. Ratios of (u/γ′z) as large as 0.986 have been monitored. Mud vents are also indicative of large internal pressures within the sediments, generated by rapid sedimentation, wave perturbation, and biogenic methane. The analysis suggests that the reduction in effective stress may be sufficient to cause failure by gravitational stresses alone.     

Fabric analysis of Allende matrix using EBSD

Abstract— Fabric analysis of the interstitial matrix material in primitive meteorites offers a novel window on asteroid formation and evolution. Electron backscatter diffraction (EBSD) has allowed fabrics in these fine‐grained materials to be visualized in detail for the first time. Our data reveal that Allende, a CV3 chondrite, possesses a uniform, planar, short‐axis alignment fabric that is pervasive on a broad scale and is probably the result of deformational shortening related to impact or gravitational compaction. Interference between this matrix fabric and the larger, more rigid components, such as dark inclusions (DIs) and calcium‐aluminium‐rich inclusions (CAIs), has lead to the development of locally oriented and intensified matrix fabrics. In addition, DIs possess fabrics that are conformable with the broader matrix fabric. These results suggest that DIs were in situ prior to the deformational shortening event responsible for these fabrics, thus providing an argument against dark inclusions being fragments from another lithified part of the asteroid (Kojima and Tomeoka 1996; Fruland et al. 1978). Moreover, both DIs and Allende matrix are highly porous (?25%) (Corrigan et al. 1997). Mobilizing a highly porous DI during impact‐induced brecciation without imposing a fabric and incorporating it into a highly porous matrix without significantly compacting these materials is improbable. We favor a model that involves Allende DIs, CAIs, and matrix accreting together and experiencing the same deformation events.     

Modelling the effect of rainfall on instabilities of slopes along highways

 During and after the very wet 1991/1992 winter experienced in Jordan, significant instabilities occurred in several sections of the new Irbid–Amman Highway in Jordan. A potential impact of surface and subsurface flow on the failed areas was noted. This paper is concerned with a hydrological study of the Irbid–Amman Highway, including watershed characteristics, hydrological data analysis, and hydraulic analysis of remedial works to failed areas and other parts of the highway drainage to minimize the impact of surface runoff and the effects of subsurface water with respect to the stability of the upslope and to limit the porewater pressure within the road formation. The study shows that the culvert capacity and the discharge velocity of the cross-highway drainage are deficient. Recommendations (e.g. gabion cascades) are therefore suggested to reduce drainage to the cross highway drainage structures. Grouting is suggested to stabilize the embankments above the inlets to culverts. Remedial drainage works are suggested for each major failed area. These include: culverts, table drain, drainage blanket beneath road formation, cut-off drains above cuttings, subsurface drains into the cut in the vicinity of springs, curtain drain beneath the lined table drain, and others. Received: 26 March 1997 · Accepted: 23 March 1998     

The emergence of braided magnetic fields

We study the emergence of braided magnetic fields from the top of the solar interior through to the corona. It is widely believed that emerging regions smaller than active regions are formed in the upper convection zone near the photosphere. Here, bundles of braided, rather than twisted, magnetic field can be formed, which then rise upward to emerge into the atmosphere. To test this theory, we investigate the behaviour of braided magnetic fields as they emerge into the solar atmosphere. We compare and contrast our models to previous studies of twisted flux tube emergence and discuss results that can be tested observationally. Although this is just an initial study, our results suggest that the underlying magnetic field structure of small emerging regions need not be twisted and that braided field, formed in the convection zone, could suffice.     

Coastal landslides and swelling clays at Røsnæs,Denmark

Prior, D. B., 1973: Coastal landslides and swelling clays at Røsnæs, Denmark. Geografisk Tidsskrift, 72: 45–48. København, September 30, 1973.

The landslide morphology of the Røsnæs area has been examined and materials involved in active landsliding analysed.     

Albite crystallographic preferred orientation and grain misorientation distribution in a low-grade mylonite: implications for granular flow

Crystallographic orientation data from pure albite domains in a low-grade sheared metagabbro from the Combin Zone of the western Italian Alps were measured by electron backscatter diffraction. Crystallographic preferred orientations (CPOs) in four high-strain domains are non-random and have a triclinic symmetry. The clusters of [100], [010] and [001] show an angular relationship that corresponds to that of the albite crystal lattice. However, the orientations of axis clusters to the kinematic axes vary from domain to domain. CPOs from a low-strain domain also show clustered axes with triclinic symmetry, but with more intense clustering than those in the high-strain domains. Grain misorientation distributions are presented both for the low-strain domain and one of the high-strain domains. In the high-strain domain, the distribution of misorientation angles between neighbouring grains displays a peak at about 70°. The equivalent distribution in the low-strain domain has a peak at 30°. For both domains, the misorientation axis distributions, between neighbouring and non-neighbouring grains, are random, except for some of axes with 160–180° misorientation that exhibit a slight concentration around [010]. The diversity of CPOs among the domains suggests that these CPOs could not be produced by dislocation creep. They are likely to have been inherited from plagioclase parents, as a result of host control on the nucleation of the new albite grains. These CPOs do not contain any direct information about the deformation kinematics. We interpret that deformation of these domains occurred by granular flow. Crystallographic axis dispersion due to grain boundary sliding (GBS) caused weakening of CPOs, modification of misorientation angle distributions and randomisation of misorientation axis distributions. The fact that a CPO can survive GBS even after a high strain indicates that CPO is not always a sensitive indicator of deformation mechanisms. Misorientation distribution may provide a complementary, and possibly a more sensitive indicator of deformation mechanisms.     

Experimental investigation of the angular dependence of low-frequency seabed reverberation

Linear frequency-modulated (LFM) signals with 600 Hz bandwidth, centered at 1.1 kHz were transmitted from a towed source in a shallow-water environment in the Mediterranean Sea and received at a distant vertical line array (VLA). Arrivals recorded on the VLA were beamformed to give incident intensity as a function of vertical angle. Simultaneous measurements of quasimonostatic reverberation were made on a horizontal line array (HLA), towed close to the source. In this paper, these data are analyzed to study the relation between the angle at which sound arrived at the patch of seabed surrounding the VLA and the intensity of quasimonostatic reverberation returned from that patch. The validity of three candidate relations (Lambert's Law, angle-independent scattering and an intermediate relation) is investigated and scattering strength parameters (Lambert /spl mu/ and equivalents) are also deduced for the patch of seabed surrounding the VLA. Only weak evidence is found to support one of the scattering relations (the intermediate) over the other two and the reasons for this are discussed. The physical processes that may underlie the intermediate relation are also discussed.     

Development of garnet porphyroblasts by multiple nucleation,coalescence and boundary misorientation‐driven rotations

Two types of garnet porphyroblast occur in the Schneeberg Complex of the Italian Alps. Type 1 porphyroblasts form ellipsoidal pods with a centre consisting of unstrained quartz, decussate mica and small garnet grains, and a margin containing large garnet grains. Orientation contrast imaging using the scanning electron microscope shows that the larger marginal garnet grains comprise a number of orientation subdomains. Individual garnet grains without subdomains are small (< 50 µm), faceted and idioblastic, and have simple zoning profiles with Ca‐rich cores and Ca‐poor rims. Subdomains of larger garnet grains are similar in size to the individual, small garnet grains. Type 2 porphyroblasts comprise only ellipsoidal garnet, with small subdomains in the centre and larger subdomains at the margin. Each subdomain has its own Ca high, Ca dropping towards subdomain boundaries. Garnet grains, with or without subdomains, all have the same Ca‐poor composition at rims in contact with other minerals. The compositional zonation patterns are best explained by simultaneous, multiple nucleation, followed by growth and amalgamation of individual garnet grains. The range of individual garnet and garnet subdomain sizes can be explained by a faster growth rate at the porphyroblast margin than in the centre. The difference between Type 1 and Type 2 porphyroblasts is probably related to the growth rate differential across the porphyroblast. Electron backscatter diffraction shows that small, individual garnet grains are randomly oriented. Large marginal garnet grains and subdomain‐bearing garnet grains have a strong preferred orientation, clustering around a single garnet orientation. Misorientations across subdomain boundaries are small and misorientation axes are randomly oriented with respect to crystallographic orientations. The only explanation that fits the observational data is that individual garnet grains rotated towards coincident orientations once they came into contact with each other. This process was driven by the reduction of subdomain boundary energy associated with misorientation loss. Rotation of garnet grains was accommodated by diffusion in the subdomain boundary and diffusional creep and rigid body rotation of other minerals (quartz and mica) around the garnet. An analytical model, in which the kinetics of garnet rotation are controlled by the rheology of surrounding quartz, suggests that, at the conditions of metamorphism, the rotation required to give a strong preferred orientation can occur on a similar time‐scale to that of porphyroblast growth.     

Submarine slope processes on a fan delta,Howe Sound,British Columbia

Modern side-scan sonar technology was used to resurvey the site of the Howe Sound submarine slide described by Terzaghi. Chutes, hummocky topography, and subparallel scarps indicative of submarine mass movement are widespread. Submarine slope processes appear to be far more important to the development of this coarsegrained fan delta than suspected.