Determination of Ocean Wave Period from Altimeter Data Using Wave-Age Concept

This study makes use of the concept of wave age in estimating ocean wave period from space borne altimeter measurements of backscattering coefficient and significant wave height. Introduction of wave age allowed better accounting of the difference between swells and wind waves. Using two years (1998 and 1999) data of TOPEX/Poseidon altimeter and ocean data buoy observations in the Indian Ocean, coefficients were generated for wave period, which were subsequently tested against data for the years 2000 and 2001. The results showed the wave period accuracy to be of the order of 0.6 sec (against 1.3 sec obtained with the semiempirical approach, reported earlier).     

Physical and biological response of the Arabian Sea to tropical cyclone Phyan and its implications

The response to the tropical cyclone Phyan, which developed in the eastern Arabian Sea during 9-11 November 2009, was rapid cooling of sea surface temperature (SST), enhancement of chlorophyll a and two-fold increase in net primary productivity (NPP). Cooling of SST was immediate in response to the strong wind-mixing, and the subsequent upward Ekman pumping sustained the cooling even after the dissipation of Phyan. The biological response mediated by the upward Ekman pumping driven vertical transport of subsurface nutrient showed a time lag of 3-4 days. The CO? flux to the atmosphere associated with Phyan was 0.123 Tg C, which accounted for ~85% of the total out-gassing from the eastern Arabian Sea during November. Thus, an increased occurrence of cyclones in a warming environment will lead to an enhanced biomass production and also increase in CO? out-gassing.     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Impact of Satellite Altimetry on Simulations of Sea Level Variability by an Indian Ocean Model

This article describes the impact of satellite altimeter data on the simulations of sea level variability (SLV) by a nonlinear reduced gravity model of the entire Indian Ocean. The model has been forced by 6-hourly analyzed wind stress data containing SSM/I observations and has been able to produce realistic circulation features. However, SLV values observed by Topex/Poseidon altimeter do not fit these simulations because of imperfect initial data. Hence an attempt has been made to initialize the model using altimeter data. The initialized model-generated SLVvalues have been compared with SLV derived by altimeter for monsoon as well as nonmonsoon months of 1996. Experimental runs have been performed for 10 days, 20 days, and one month. It has been found that the initialized model results on the final day of these experiments are in very good agreement with altimeter data of the same day. It is thus possible, in principle, to hindcast and forecast sea level variations in the time scale of 10 days to one month with the availability of good quality wind data for forcing the model and altimeter observations of sea level for initializing it.     

Hydrogeochemical processes and quality assessment of groundwater in Dumka and Jamtara districts, Jharkhand, India

The hydrogeochemical study of groundwater in Dumka and Jamtara districts has been carried out to assess the major ion chemistry, hydrogeochemical processes and groundwater quality for domestic and irrigation uses. Thirty groundwater samples were collected and analyzed for pH, electrical conductivity, total dissolved solids (TDS), total hardness, anions (F^?, Cl^?, NO₃ ^?, HCO₃ ^?, SO₄ ^2?) and cations (Ca²⁺, Mg²⁺, Na⁺, K⁺). The analytical results show the faintly alkaline nature of water and dominance of Mg²⁺ and Ca²⁺ in cationic and HCO₃ ^? and Cl^? in anionic abundance. The concentrations of alkaline earth metals (Ca²⁺?+?Mg²⁺) exceed the alkali metals (Na⁺?+?K⁺) and HCO₃ ^? dominates over SO₄ ^2??+?Cl^? concentrations in the majority of the groundwater samples. Ca?CMg?CHCO₃ is the dominant hydrogeochemical facies in 60?% of the groundwater samples, while 33?% samples occur as a mixed chemical character of Ca?CMg?CCl hydrogeochemical facies. The water chemistry is largely controlled by rock weathering and ion exchange processes with secondary contribution from anthropogenic sources. The inter-elemental correlations and factor and cluster analysis of hydro-geochemical database suggest combined influence of carbonate and silicate weathering on solute acquisition processes. For quality assessment, analyzed parameter values were compared with Indian and WHO water quality standards. In majority of the samples, the analyzed parameters are well within the desirable limits and water is potable for drinking purposes. Total hardness and concentrations of TDS, Cl^?, NO₃ ^? _, Ca²⁺ and Mg²⁺ exceed the desirable limits at a few sites, however, except NO₃ ^? all these values were below the highest permissible limits. The calculated parameters such as sodium adsorption ratio, percent sodium (%Na) and residual sodium carbonate revealed excellent to good quality of groundwater for agricultural purposes, except at few sites where salinity and magnesium hazard (MH) values exceeds the prescribed limits and demands special management.     

Probabilistic Analysis and Design of a Strip Footing on Layered Soil Media

In the present paper, the analysis of a strip footing resting on a layered soil system has been carried out considering the elastic moduli of soil layers as random variables. Three layers of soil have been considered and the analysis employs Monte Carlo simulation. The modulus of elasticity has been considered as random variable having lognormal distribution. Factors of safety with respect to settlement of footing and the interfacial stresses have been determined and have been related to the associated risk factor and coefficient of variation of the random variable. A detailed parametric study revealed that for a given risk level, the factors of safety is strongly dependent on the coefficient of variation of elastic modulus and only mildly upon other parameters of the soil?Cfoundation system. This facilitated the development of closed form equations for the upper bounds on factors of safety only in terms of allowable risk of failure and the coefficient of variation of elastic modulus.     

Empirical estimate of p-mode frequency shift for solar cycle 23

We have obtained empirical relations between the p-mode frequency shift and the change in solar activity indices. The empirical relations are determined on the basis of frequencies obtained from BBSO and GONG stations during solar cycle 22. These relations are applied to estimate the change in mean frequency for the cycle 21 and 23. A remarkable agreement between the calculated and observed frequency shifts for the ascending phase of cycle 23, indicates that the derived relations are independent of epoch and do not change significantly from cycle to cycle. We propose that these relations could be used to estimate the shift in p-mode frequencies for past, present and future solar activity cycles, if the solar activity index is known. The maximum frequency shift for cycle 23 is estimated to be 265±90 nHz, corresponding to a predicted maximum smoothed sunspot number 118.1±35.