Estimation of surface roughness (z0) over a stabilizing coastal dune field based on vegetation and topography

Accurate knowledge of the surface roughness and the resultant wind speed are important for many applications, such as climatic models, wind power meteorology, agriculture and erosion hazards, especially on sand dunes in arid and semi‐arid environments, where vegetation cover is scarce. In this study we aimed at quantifying the effects of vegetation cover and topography on surface roughness over a stabilizing dune field on the southern coast of Israel. Forty‐six wind measurements were made at various distances from the coastline, ranging from 10 to 2800 m, and z₀ values were calculated from the wind measurements based on the ratio between the wind gust and the average wind speed. We estimated vegetation cover using the soil adjusted vegetation index (SAVI) from Landsat satellite images for the upwind sector at various lengths, ranging from 15 to 400 m, and based on digital elevation models and differential GPS field measurements we calculated the topographic variable of the relative heights of the stations. z₀ values were positively correlated with the winter SAVI values (r = 0·87 at an upwind length of 200 m) and negatively correlated with the relative height (r = ?0·68 at an upwind length of 200–400 m for the inland dune stations). Using these variables we were able to create a map of estimated z₀ values having an accuracy of over 64%. Such maps provide a better understanding of the spatial variability in both wind speed and sand movement over coastal dune areas. Copyright © 2007 John Wiley & Sons, Ltd.     

Evaluation of Sludge Digester Effluent as Feeding Solution for the Enrichment of Anammox Bacteria

The aim of this study is to evaluate the feasibility of sludge digester effluent as feeding solution to enrich anaerobic ammonium oxidation (anammox) bacteria. The performance of the two parallel pilot scale‐upflow packed bed anammox reactors (UPBAn1 and UPBAn2) are examined in terms of the enrichment of anammox bacteria. The control experiment is set up conducting synthetic wastewater as feeding solution in the UPBAn1 reactor whereas, the sludge digester effluent is fed to the nitritation reactor and then the partially nitrated digester effluent to the UPBAn2 reactor. Anammox activities are evaluated by mass balances based on ammonium (NH₄⁺), nitrite (NO₂^?), and nitrate (NO₃^?) analysis and NRR. Microbial community of anammox bacteria is analyzed using real‐time polymerase chain reaction (PCR). The results demonstrate that UPBAn 1 and UPBAn2 reactors are successfully enriched on days 64 and 40 with NRRs of 19.54 and 19.43 g N m^?3 per day, respectively. This study reveals that both synthetic wastewater and digester effluent are suitable for the enrichment of anammox bacteria; however, digester effluent as feeding solution for enrichment of anammox bacteria based on the ease of process control and process stability is more advisable.     

A semi‐distributed parallel‐type linear reservoir rainfall‐runoff model and its application in Taiwan

The main purpose of this paper is to introduce a semi‐distributed parallel surface rainfall‐runoff conceptual model. In this paper, a general solution of the instantaneous unit hydrograph (IUH) has been derived successfully for N linearly connected reservoirs, each having a different storage constant. The solution is a function of geomorphologic parameters, meteorologic factors and roughness coefficients. The model also takes into account the hydrologic response which is influenced by outflow downstream of a reservoir. For calibration, the shuffled complex evolution (SCE) algorithm is used to search for the global optimal parameters of the model. Because of the parallel structure, the mean roughness parameter of the channel becomes a “conceptual” parameter without a real physical meaning. To evaluate the adaptability of the model adopted, three watersheds around the city of Taipei in Taiwan were chosen to test the effectiveness of the model. The study provides an appropriate rainfall‐runoff model for planning flood mitigation in Taiwan. Copyright © 1999 John Wiley & Sons, Ltd.     

余辉等离子体中的谐振现象及其在空间研究中的可能应用

用谐振探针在余辉式等离子体中进行测量,观察到了谐振效应。与某些作者的结论不同的是:可证明这一谐振发生在等离子体频率ω_p处而没有强的阻尼。如果用这一方法进行等离子体浓度测量也不受探针污染的影响。进而指出这一技术在空间等离子体研究方面可能的应用。     

Identification of modal parameters of non‐classically damped linear structures under multi‐component earthquake loading

A method for parametric system identification of classically damped linear system in frequency domain is adopted and extended for non‐classically damped linear systems subjected up to six components of earthquake ground motions. This method is able to work in multi‐input/multi‐output (MIMO) case. The response of a two‐degree‐of‐freedom model with non‐classical damping, excited by one‐component earthquake ground motion, is simulated and used to verify the proposed system identification method in the single‐input/multi‐output case. Also, the records of a 10 storey real building during the Northridge earthquake is used to verify the proposed system identification method in the MIMO case. In this case, at first, a single‐input/multi‐output assumption is considered for the system and modal parameters are identified, then other components of earthquake ground motions are added, respectively, and the modal parameters are identified again. This procedure is repeated until all four components of earthquake ground motions which are measured at the base level of the building are included in the identification process. The results of identification of real building show that consideration of non‐classical damping and inclusion of the multi‐components effect of earthquake ground motions can improve the least‐squares match between the finite Fourier transforms of recorded and calculated acceleration responses. Copyright © 2006 John Wiley & Sons, Ltd.     

Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)

The damage distribution in Adra town (south‐eastern Spain) during the 1993 and 1994 Adra earthquakes (5.0 magnitude), that reached a maximum intensity degree of VII (European Macroseismic Scale (EMS scale)), was concentrated mainly in the south‐east zone of the town and the most relevant damage occurred in reinforced concrete (RC) buildings with four or five storeys. In order to evaluate the influence of ground condition on RC building behaviour, geological, geomorphological and geophysical surveys were carried out, and a detailed map of ground surface structure was obtained. Short‐period microtremor observations were performed in 160 sites on a 100m × 100m dimension grid and Nakamura's method was applied in order to determine a distribution map of soil predominant periods. Shorter predominant periods (0.1–0.3 s) were found in mountainous and neighbouring zones and larger periods (greater than 0.5 s) in thicker Holocene alluvial fans. A relationship T = (0.049 ± 0.001)N, where T is the natural period of swaying motion and N is the number of storeys, has been empirically obtained by using microtremor measurements at the top of 38 RC buildings (ranging from 2 to 9 storeys). 1‐D simulation of strong motion on different soil conditions and for several typical RC buildings were computed, using the acceleration record in Adra town of the 1993 earthquake. It is noteworthy that all the aforementioned results show the influence of site effects in the degree and distribution of observed building damage. Copyright © 2007 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.