Prevailing-frequency approximation of the coupling ray theory along the SH and SV reference rays in a heterogeneous generally anisotropic medium which is approximately uniaxial

The behaviour of the actual polarization of an electromagnetic wave or elastic S–wave is described by the coupling ray theory, which represents the generalization of both the zero–order isotropic and anisotropic ray theories and provides continuous transition between them. The coupling ray theory is usually applied to anisotropic common reference rays, but it is more accurate if it is applied to reference rays which are closer to the actual wave paths. In a generally anisotropic or bianisotropic medium, the actual wave paths may be approximated by the anisotropic–ray–theory rays if these rays behave reasonably. In an approximately uniaxial (approximately transversely isotropic) anisotropic medium, we can define and trace the SH (ordinary) and SV (extraordinary) reference rays, and use them as reference rays for the prevailing–frequency approximation of the coupling ray theory. In both cases, i.e. for the anisotropic–ray–theory rays or the SH and SV reference rays, we have two sets of reference rays. We thus obtain two arrivals along each reference ray of the first set and have to select the correct one. Analogously, we obtain two arrivals along each reference ray of the second set and have to select the correct one. In this paper, we suggest the way of selecting the correct arrivals. We then demonstrate the accuracy of the resulting prevailing–frequency approximation of the coupling ray theory using elastic S waves along the SH and SV reference rays in four different approximately uniaxial (approximately transversely isotropic) velocity models.     

Geophysical evidence of the Eastern Marginal Fault of the Cheb Basin (Czech Republic)

The western part of the Bohemian Massif hosts an intersection of two regional fault zones, the SW-NE trending Oh?e/Eger Graben and the NNW-SSE trending Mariánské Lázně Fault, which has been reactivated several times in the geological history and controlled the formation of the Tertiary Cheb Basin. The broader area of the Cheb Basin is also related to permanent seismic activity of M_L 3+ earthquake swarms. The Eastern Marginal Fault of the Cheb Basin (northern segment of the Mariánské Lázně Fault) separates the basin sediments and underlying granites in the SW from the Kru?né Hory/Erzgebirge Mts. crystalline unit in the NE. We describe a detailed geophysical survey targeted to locating the Eastern Marginal Fault and determining its geometry in the depth. The survey was conducted at the Kopanina site near the Nový Kostel focal zone, which shows the strongest seismic activity of the whole Western Bohemia earthquake swarm region. Complex geophysical survey included gravimetry, electrical resistivity tomography, audiomagnetotellurics and seismic refraction. We found that the rocks within the Eastern Marginal Fault show low resistivity, low seismic velocity and density, which indicates their deep fracturing, weathering and higher water content. The dip of the fault in shallow depths is about 60° towards SW. At greater depths, the slope turns to subvertical with dip angle of about 80°. Results of geoelectrical methods show blocky fabric of the Cheb Basin and deep weathering of the granite bedrock, which is consistent with geologic models based on borehole surveys.     

Geomechanics of hazardous landslides

A catalogue of possible landslide initial failure mechanisms, taking into account the geological setting and the geometry of the slope, the joint structure, the habitus of the rock blocks, as well as the mechanical behaviour of the rocks and of the rock mass （deformation and strength parameters）, is presented. Its aim is to give geologists as well as engineers the opportunity to compare phenomena in the field and phenomena belonging to particular mechanisms and to find the mechanism occurring. The presented catalogue of initial landslide mechanisms only comprises the mechanisms having a clearly defined mechanical model that can be divided into empirical relations and into mechanical models, as well as an overview of run out models, which can be divided into empirical relations and into mechanical models.     

A multi-agent-based model for sustainable governance of urban flood risk mitigation measures

Natural Hazards - Consequences of urban floods increased and diversified in terms of social, economical and environmental effects, due to the dense and unplanned urbanization in areas at risk of...     

Highways protection from flood hazards,a case study: New Tama road,KSA

Natural Hazards - Highways in arid regions are highly exposed to damage by floods. This requires intensive analysis of flood quantity, time and direction that can be used to design the suitable...     

High-latitude dust deposition in snow on the glaciers of James Ross Island,Antarctica

High-latitude dust (HLD) depositions on four glaciers of James Ross Island (the Ulu Peninsula) were analysed. The deposition rate on the selected glaciers varies from 11.8 to 64.0 g m⁻², which is one order of magnitude higher compared to the glaciers in Antarctica or elsewhere in the world. A strong negative relationship between the sediment amount and altitude of a sampling site was found. This is most likely caused by the higher availability of aeolian material in the atmospheric boundary layer. General southerly and south-westerly wind directions over the Ulu Peninsula – with exceptions based on local terrain configuration – help to explain the significantly lower level of sediment deposition on San Jose Glacier and the high level on Triangular Glacier. X-ray fluorescence (XRF) spectrophotometry was used to estimate the relative proportions of the main and trace (lithophile) elements in the sediment samples. Both the sediment amount and the XRF results are analysed in a depth profile at each locality and compared among the glaciers, suggesting long-range transport of fine mineral material from outside James Ross Island. The distribution of aeolian sediment among the glaciers corresponds well with the prevailing wind direction on the Ulu Peninsula. © 2020 John Wiley & Sons, Ltd.     

Leaky Aquifer Models to Simulate the Well Flow in Fractured Aquifers with Linear Interporosity Flow

Following Hemker and Maas (1987) the models of two or three leaky aquifers are applied to simulate the flow to vertical wells operating in the fractured or dual porosity aquifers. The software WellTest (WT) (Székely 2015) is used for calculating the drawdown and discharge rate variation. The comparative analysis with the independent analytical solutions by Boulton and Streltsova-Adams (1978), Warren and Root (1963), Kazemi et al. (1969) concluded with acceptable agreement between the WT simulation and the alternate calculation methods. The selected field tests have been conducted in fractured limestone aquifers. The pumping test west of Copenhagen shows an example of fractured aquifer with considerable negative skin effect at the well face. The flowing well Wafra W1 in Kuwait operates in the two-zone aquifer exhibiting sufficient vertical recharge via leakage beyond a circular domain of estimated radius of 2460 m.     

An improved input energy spectrum verified by the shake table tests

Input energy is the principal component of the energy balance equation. It is beneficial to determine, through its components, how the recoverable and irrecoverable energies are distributed within the structural elements. Several equations and attenuation relations to define mass-normalized input energy spectra exist in the literature. They are mainly proposed for elastic systems subjected to far-fault EQs. There is a lack of experimental verification of these proposed spectra. In this paper, experimental assessment was performed to the existing spectra, and further improvements were accomplished. For this purpose, steel cantilever columns were tested on the shake table for two specific historical EQs coincidently having similar spectral acceleration values. Based on the experimental results, a three-part mass-normalized relative input energy spectrum was formulated including soil type, EQ (corner period, intensity, duration, spectral acceleration, and velocity), and structural behavioral characteristics (period and structural damping). The proposed input energy spectrum was experimentally calibrated and numerically validated for various EQs featuring near- and far-field types. Analytical and experimental comparisons were made between the previously developed spectrum and the newly proposed one. The validation studies and the statistical evaluations exposed that the proposed spectrum yielded better agreement with the experimental and numerical results.     

Geochemical Atlas of the Slovak Republic at a scale of 1:1,000,000

The Geochemical Atlas of Slovak Republic (49,036 km²) at a scale of 1 : 1,000,000 was compiled during 1991–1995 together with maps of associated geochemical and ecological features at a scale of 1 :200,000. Investigations were aimed at the evaluation of concentrations and distributions of Al, As, Ba, Be, Ca, Ce, Co, Cd, Cs, Cr, Cu, Fe, Ga, Hg, K, La, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Rb, Sb, Se, Sn, Sr, Th, U, V, W, Y, Zn, Zr in groundwater (16,359 samples), stream sediments (24,422 samples), rocks (3839 samples), soils (9892 samples from 4946 profiles; A and C horizons of each profile were sampled) and forest biomass (the foliage of the forest tree species from 3063 plots was sampled). In groundwater field measurements of temperature, pH, conductivity, dissolved O₂, acidity, alkalinity were done. The evaluation was oriented to the natural radioactivity of the Slovak territory as follows: rocks (K, U, Th, U_tot and dose rate, 15,573 reference spectrometric points), radon risk and water (U_nat, ²²⁶Ra, ²²²Rn; 5271 samples). The main objective of the Geochemical Atlas was to construct single-component maps showing concentrations of chemical elements, compounds and measured parameters in the researched media of Slovakia at a scale of 1 : 1,000.000 and to create interactive databases of chemical composition and/or measured parameters of groundwater, biomass, rocks, soils, stream sediments and natural radioactivity, for the entire territory of the Slovak Republic. The single-component maps are not constructed in the part ‘Rocks’, where all the main rocks types of Slovakia are presented in the ‘Map of lithogeochemical rock types of Slovakia at a scale of 1: 500,000’. The edition of six atlases has been planned. In 1997 the first three atlases will appear (Groundwater, Biomass, Natural Radioactivity). Publishing of last three atlases (Rocks, Soils, Stream Sediments) is planned for 1998. Since the analytical works on stream sediments were finished during 1997, it was not possible to present here the results of that part of the Geochemical Atlas.     

Damage localization and quantification of earthquake excited RC-frames

In the paper a recently proposed method for damage localization and quantification of RC-structures from response measurements is tested on experimental data. The method investigated requires at least one response measurement along the structures and the ground surface acceleration. Further, the two lowest time-varying eigenfrequencies of the structure must be identified. The data considered are sampled from a series of three RC-frame model tests performed at the structural laboratory at Aalborg University, Denmark during the autumn of 1996. The frames in the test series were exposed to two or three series of ground motions of increasing magnitude. After each of these runs the damage state of the frame was examined and each storey of the frame were classified into one of the following six classifications: undamaged, cracked, lightly damaged, damaged, severely damaged or collapse. During each of the ground motion events the storey accelerations were measured by accelerometers. After application of the last earthquake sequence to the structure the frames were cut into pieces and each of the beams and columns was statically tested and damage assessment was performed using the obtained stiffnesses. The damage in the storeys determined by the suggested method was then compared to the damage classification from the visual inspection as well as the static tests. It was found that especially in the cases where the damage is concentrated in a certain area of the structure a very good damage assessment is obtained using the suggested method. © 1998 John Wiley & Sons, Ltd.