地质实验室绘制标准曲线的数学模拟法

本文讨论了一种新的绘制标准曲线方法——数学模拟法。该方法不仅具有作图法的度和实验意义,而且还有线性回归法的数学意义。     

云南大硐厂铅锌矿床中的硫碲铋矿A

硫碲铋矿Ａ产于云南省大硐厂铅锌矿床，与自然铋、辉铋铅矿共生。晶体呈柱状，粒度０．０２￣０．３ｍｍ。反光显微镜下呈淡黄色，弱非均质性，反射率Ｒｃ′＝５２．４％，Ｒ０＝４８．８％（波长为５４０ｎｍ），显微压入硬度Ｈｖ＝４６￣７２ｋｇ／ｍｍ＾２。主要粉晶谱线：３．０６５（１０），２．１２０（７），１．３４６（５），２．２２０（４）。三方晶系，空间群为Ｄ３ｄ＾５－Ｒ３↑－ｍ，晶胞参数ａ＝０．４２４１ｎｍ，     

利用催化动力学原理测定化探样中微量碘的含量

在HAc-NaAc形成的中性缓冲溶液体系中,利用碘的催化动力学原理,使N-N-四甲基-4-4-二氨基二苯甲烷与氯胺T的氧化反应,生成蓝色络合物来测定地探样中微量碘的含量。通过实验,最佳试剂加入量为8%的HAc溶液5mL,8%的Na2CO3溶液3mL,0.1%的N-N-四甲基-4-4-二氨基二苯甲烷溶液5mL所组成的溶液体系中,在加入0.1%的氯胺T1mL显色后,其测定结果准确度、精密度高,检出限低,测定化探样中微量碘时该方法可以推广应用。     

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

Ultrahigh-pressure metamorphism in the forbidden zone: the Xugou garnet peridotite, Sulu terrane, eastern China

The Xugou garnet peridotite body of the southern Sulu ultrahigh‐pressure (UHP) terrane is enclosed in felsic gneiss, bounded by faults, and consists of harzburgite and lenses of garnet clinopyroxenite and eclogite. The peridotite is composed of variable amounts of olivine (Fo₉₁), enstatite (En_92?93), garnet (Alm_20?23Prp_53?58Knr_6?9Grs_12?18), diopside and rare chromite. The ultramafic protolith has a depleted residual mantle composition, indicated by a high‐Mg number, very low CaO, Al₂O₃ and total REE contents compared to primary mantle and other Sulu peridotites. Most garnet (Prp_44?58) clinopyroxenites are foliated. Except for rare kyanite‐bearing eclogitic bands, most eclogites contain a simple assemblage of garnet (Alm_29?34Prp_32?50Grs_15?39) + omphacite (Jd_24?36) + minor rutile. Clinopyroxenite and eclogite exhibit LREE‐depleted and LREE‐enriched patterns, respectively, but both have flat HREE patterns. Normalized La, Sm and Yb contents indicate that both eclogite and garnet clinopyroxenite formed by high‐pressure crystal accumulation (+ variable trapped melt) from melts resulting from two‐stage partial melting of a mantle source. Recrystallized textures and P–T estimates of 780–870 °C, 5–7 GPa and a metamorphic age of 231 ± 11 Ma indicate that both mafic and ultramafic protoliths experienced Triassic UHP metamorphism in the P–T forbidden zone with an extremely low thermal gradient (< 5 °C km^?1), and multistage retrograde recrystallization during exhumation. Develop of prehnite veins in clinopyroxenite, eclogite, felsic blocks and country rock gneiss, and replacements of eclogitic minerals by prehnite, albite, white mica, and K‐feldspar indicate low‐temperature metasomatism.     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.     

库车坳陷下侏罗统沉积特征及砂体展布

库车坳陷位于塔里木盆地北部，北缘是南天山山前断裂带，南缘是塔北隆起，呈NEE向展布，东西长250km，南北宽20－60km，面积约21170km^2。下侏罗统自下而上发育阿合组、阳霞组。对吐格尔明、克孜勒努尔、库车河剖面及依南2井岩芯观察发现，阿合组和阳霞组按其岩性特征均可以划分为5个岩性段，各个岩性段在全具有对比性。还可分出4类和17个亚类岩相。阿合组细砂岩以上的粗碎屑岩含量为80％以上；阳霞组细砂岩以上的碎屑岩含量为50％－60％。砂岩厚度占总地层厚度的50％－60％以上，是油气勘探的重要目的层系。以吐格尔明剖面为代表的依南2井以东地区的阿合组和阳霞组岩矿特征基本相似，以克孜勒努尔地区为代表的依南2井以西地区有较大差异，即阳霞组长石含量几乎为零。两区共同点是以岩屑砂岩为主，成分成熟度低，结构成熟度中等，岩屑含量较高。从岩性组合、沉积构造、微观岩石成分、结构和砂体形态等方面的综合分析认为，辫状三角洲沉积体系是该区阿合组和阳霞组的主要沉积体系。阿合组砂体纵向上以多个辫状三角洲平原上的辫状分流河道砂岩加积复合为主，横向上指状镶嵌叠置呈东西向展布。阳霞组第3岩性段砂体纵向上以多个辫状三角洲前缘上的水下辫状分流河道砂岩加积复合为主，横向上指状镶嵌叠置也呈东西向展布。第2、4、5岩性段砂体以河道滞流砂岩侧砂为主，横向叠瓦状叠置呈东西向展布。     

Adsorption of antimony(V) on kaolinite as a function of pH,ionic strength and humic acid

The present work investigated the adsorption and mobility (desorption) of Sb(V) on kaolinite using batch experiments. The adsorption of Sb(V) on kaolinite was studied as a function of contact time, pH, ionic strength, humic acid (HA), initial Sb(V) concentration and temperature. Kinetic studies suggest that the equilibrium is achieved within 24 h. The adsorption of Sb(V) was strongly affected by changes in I at low ionic strength and unaffected at high ionic strength. The adsorption is weakly dependent on the presence of humic acid, but is strongly dependent on pH. Within the range tested, the optimal pH for Sb(V) adsorption is 3.6, and close to 75% removal can be achieved. Desorption is dependent on the original suspension pH. The addition sequence of Sb(V)/HA do not influence the adsorption of Sb(V) on kaolinite. The adsorption data fit both the Freundlich and Langmuir isotherm. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) were calculated from the temperature dependence, and the results suggest the endothermic and spontaneous nature of the process.     

Ionic conductivity in gem-quality single-crystal alkali feldspar from the Eifel: temperature,orientation and composition dependence

We measured the ion conductivity of single-crystal alkali feldspar originating from two different locations in the Eifel/Germany, named Volkesfeld and Rockeskyller sanidine and having potassium site fractions \(C_\mathrm{K}\) of 0.83 and 0.71, respectively. The dc conductivities resulting from electrochemical impedance spectroscopy over the temperature range of 300–900 \(^{\circ }\hbox {C}\) show a weak composition dependence but pronounced differences between the b-direction [\(\perp (010)\)] and \(c^{*}\)-direction [\(\perp (001)\)] of the monoclinic feldspar structure. Conductivity activation energies obtained from the observed linear Arrhenius plots are close to 1.2 eV in all cases, which is closely similar to the activation energies of the \(^{22}\mathrm{Na}\) tracer diffusivity in the same crystals. Taking into account literature data on K tracer diffusion and diffusion correlation effects, the present results point to a predominance of the interstitialcy mechanism over the vacancy mechanism in mass and charge transport on the alkali sublattice in potassium-rich alkali feldspar.     

Petrography and geochemistry of Jurassic sandstones from the Jhuran Formation of Jara dome,Kachchh basin,India: Implications for provenance and tectonic setting

Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic setting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains with minor amount of K-feldspar and lithic fragments in the modal ratio of Q ₈₉:F ₇:L ₄. On the basis of geochemical results, sandstones are classified into arkose, sub-litharenite, wacke and quartz arenite. The corrected CIA values indicate that the weathering at source region was moderate to intense. The distribution of major and REE elements in the samples normalized to upper continental crust (UCC) and chondrite values indicate similar pattern of UCC. The tectonic discrimination diagram based on the elemental concentrations and elemental ratios of Fe₂O₃ + MgOvs. TiO₂, SiO₂ vs. log(K₂O/Na₂O), Sc/Cr vs. La/Y, Th–Sc–Zr/10, La–Th–Sc plots Jhuran Formation samples in continental rift and collision settings. The plots of Ni against TiO₂, La/Sc vs. Th/Co and V–Ni–Th ?10 reveals that the sediments of Jhuran Formation were derived from felsic rock sources. Additionally, the diagram of (Gd/Yb) _N against Eu/Eu ^? suggest the post-Archean provenance as source possibly Nagar Parkar complex for the studied samples.