Possibilities of GPS kinematic measurements for geological survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN (system of united trigonometric cadaster network) and Baa (the Baltic Sea after adjustment). Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points. Geodetic network was adjusted by two ways.     

Deforestation and fragmentation of seasonal tropical forests in the southern Yucatán,Mexico (1990–2006)

The southern Yucatán (SY) has been recognized as a hotspot of biodiversity with great risk of deforestation. Land change analysis, based on classified Landsat TM and ETM?+?satellite imagery (1990, 2000 and 2006), was used to estimate the annual deforestation rates of 141 land management units of the SY, and spatial patterns of forest fragmentation around and within the Calakmul Biosphere Reserve (CBR), which comprises approximately one-third of the region. Results indicate a decrease in annual deforestation rates over 1990–2006, from 0.15% year^?1 to 0.06% year^?1, but with significant sub-regional variations in the quantity and rate of forest loss. Despite a decline in deforestation during this period, there was considerable fragmentation both inside and outside the CBR. While population pressures and the expansion of pasture have caused deforestation across the region, agricultural intensification, diversified income strategies and reserve conservation may have contributed to reduced forest loss during the study period.     

Mapping burns and natural reforestation using thematic Mapper data

Remote sensing techniques are specially suitable to detect and to map areas affected by forest fires. In this work, Landsat 5 Thematic Mapper (TM) data has been used to study a number of forest fires that occurred in the province of Valencia (Spain) and to monitor the vegetation regeneration over burnt areas.

A reference area (non‐burnt forest) was established to assess the change produced by fire. The radiance in the thermal band (10.4–12.5 μm) and the normalized difference in reflectance between near 1R (0.76–0.90 μm) and middle IR (2.08–2.35 μm) were the most suitable parameters to map burnt areas. This index can also be used for monitoring vegetation regeneration in burnt areas. About a month after the fire, the burns show temperatures of 5–6 °C higher than those found in the reference area, and the vegetation index shows negative values whereas the reference area values remain positive. The differences between the burns and the reference area for the vegetation index decrease with time as vegetation regenerates.     

Disentangling Turbulent Gas Diffusion from Non-diffusive Transport in the Boundary Layer

Boundary-Layer Meteorology - An analysis based on the law of linear momentum conservation demonstrates unequivocally that the mass fraction is the scalar whose gradient determines gas diffusion,...     

The evolution of the hydrothermal IOCG system in the Mantoverde district,northern Chile: new evidence from microthermometry and stable isotope geochemistry

New microthermometric data combined with stable isotope geochemistry and paragenetic relationships support a previously suggested cooling–mixing model for the iron oxide–copper–gold mineralization in the Mantoverde district. Fluid inclusions show characteristics of a CO₂-bearing aqueous NaCl ± CaCl₂ salt system. The evolution of the Mantoverde hydrothermal system is characterized by (1) an early hypersaline, high to moderate temperature fluid; (2) a moderate saline, moderate temperature fluid; and (3) a low saline, moderate to low temperature fluid. Early magnetite formation took place at median temperatures of 435.0°C, whereas hematite formed at median temperatures of 334.4°C. The main sulfide mineralization texturally post-dates the iron oxides and occurred before late-stage calcite, which developed at a median temperature of 244.8°C. Boiling occurs only locally and is of no relevance for the ore formation. The microthermometric and stable isotope data are supportive for a fluid cooling and mixing model, and suggestive for a predominantly magmatic–hydrothermal fluid component during the iron oxide and main sulfide mineralization. Thereafter, the incursion of a nonmagmatic fluid of ultimately meteoric or seawater gains more importance.     

Fluid evolution of the Hub Stock, Horní Slavkov–Krásno Sn–W ore district, Bohemian Massif, Czech Republic

The Horní Slavkov–Krásno Sn–W ore district is hosted by strongly altered Variscan topaz–albite granite (Krudum granite body) on the northwestern margin of the Bohemian Massif. We studied the fluid inclusions on greisens, ore pockets, and ore veins from the Hub Stock, an apical expression of the Krudum granite. Fluid inclusions record almost continuously the post-magmatic cooling history of the granite body from ～500 to <50°C. Rarely observed highest-temperature (～500°C) highest-salinity (～30?wt.% NaCl eq.) fluid inclusions are probably the result of secondary boiling of fluids exsolved from the crystallizing magma during pressure release which followed hydraulic brecciation of the gneissic mantle above the granite cupola. The greisenization was related to near-critical low-salinity (0–7?wt.% NaCl eq.) aqueous fluids with low amount of CO₂, CH₄, and N₂ (≤10?mol% in total) at temperatures of ～350–400°C and pressures of 300–530 bar. Crush-leach data display highly variable and negatively correlated I/Cl and Br/Cl values which are incompatible with both orthomagmatic and/or metamorphic origin of the fluid phase, but can be explained by infiltration of surficial and/or sedimentary fluids. Low fluid salinity indicates a substantial portion of meteoric waters in the fluid mixture that is in accordance with previous stable isotope data. The post-greisenization fluid activity associated with vein formation and argillitization is characterized by decreasing temperature (<350 to <50°C), decreasing pressure (down to ～50–100 bar), and mostly also decreasing salinity.     

The 2011 submarine volcanic eruption in El Hierro (Canary Islands)

Forty years after the Teneguía Volcano (La Palma, 1971), a submarine eruption took place off the town of La Restinga, south of El Hierro, the smallest and youngest island of the Canarian Archipelago. Precursors allowed an early detection of the event and its approximate location, suggesting it was submarine. Uncertainties derived from insufficient scientific information available to the authorities during the eruption, leading to disproportionate civil protection measures, which had an impact on the island's economy—based primarily on tourism—while residents experienced extra fear and distress.     

Uvaichnites riojana: A new crane-like bird ichnotaxon from the lower Miocene of La Rioja (Ebro Basin,Spain)

A new bird ichnotaxon found in Cenicero (La Rioja, Ebro Basin, Spain) is described here. The footprints are preserved in sandstone beds in a central-distal alluvial fringe with a mud-dominated floodplain, located in the transition unit between the Nájera and Haro formations. This level is positioned between the Y and Z local Agenian biozones (lower Miocene). The footprints were preliminarily studied in another work and considered as an indeterminate ichnotaxon. Uvaichnites riojana ichnogen. nov. and ichnosp. nov. is a tridactyl footprint characterized by a prominent central pad, very large to enormous sized, with unjointed toes at the proximal end. These features differ from Aquatilavipes, Aviadactyla, Avipeda, Ludicharadripodiscus, Fuscinapeda, and Ornithotarnocia of the Avipedidae morphofamily. U. riojana is considered to be similar to common crane (Grus grus) footprints in the Gruidae family. There are a few references about this family in the Iberian Peninsula and Balearic Islands and this find could confirm the presence of Gruidae since at least the lower Miocene.     

Tectono-sequence stratigraphy and U–Pb zircon ages of the Rincón Blanco Depocenter,northern Cuyo Rift,Argentina

Extensional processes that followed the Gondwanan Orogeny rise to the development of a series of rift basins along the continental margin over older accreted Eopaleozoic terranes. Stratigraphic, structural, paleontological, and isotopic studies are presented in this work in order to constrain the ages of the sedimentary infilling and to analyze the tectosedimentary evolution of one of the Cuyo basin depocenters, known as Rincón Blanco. This asymmetrical half-graben was filled by continental sediments under a strong tectonic control. The infilling was strongly controlled by tectonics which in term produced distinctive features along the whole sedimentary sequence. Using a combination of lithological and structural data the infilling was subdivided into packages of genetically linked units bounded by regional extended surfaces. Several tuffs and acid volcanic rocks have been collected across the whole section of the Rincon Blanco sub-basin for SHRIMP and LA-MC-ICPMS U–Pb zircon dating. The ages obtained range from 246.4 ± 1.1 Ma to 230.3 ± 1.5 Ma which is the time elapsed for the deposition of three tectono-sequence units separated by regional unconformities and mainly constrained to the Middle Triassic. They are interpreted as a result of a reactivation of the extensional system that has evolved along strike as segments of faults that linked together and/or as laterally propagating faults. Regional correlation with coeval rift basins permits to establish north-south propagation in the extensional regime along the western margin of SW Gondwana. This trending started in the lowermost Triassic and extended until the latest Triassic. Two of them were precisely correlated with Cerro Puntudo and Cacheuta half-graben systems. The new data indicate that the three sequences were mostly deposited during the Middle Triassic (246 to 230 Ma), with no evidence of sedimentation during Norian and Rhaetian, which is in conflict with some previous biostratigraphic studies.     

The Central Iberian arc, an orocline centered in the Iberian Massif and some implications for the Variscan belt

An arcuate structure, comparable in size with the Ibero-Armorican arc, is delineated by Variscan folds and magnetic anomalies in the Central Iberian Zone of the Iberian Massif. Called the Central Iberian arc, its sense of curvature is opposite to that of the Ibero-Armorican arc, and its core is occupied by the Galicia-Trás-os-Montes Zone of NW Iberia, which includes the Rheic suture. Other zones of the Iberian Massif are bent by the arc, but the Ossa-Morena and South Portuguese zones are not involved. The arc formed during the Late Carboniferous, at final stages of thermal relaxation and collapse, and an origin related with right-lateral ductile transpression at the scale of the Variscan belt is proposed. The Central Iberian arc explains the width of the Central Iberian Zone, clarifies the position of the allochthonous terranes of NW Iberia, and opens new perspectives for correlations with the rest of the Variscan belt, in particular, with the Armorican Massif, whose central zone represents the continuation of the southwest branch of the arc detached by strike-slip tectonics.