Etude des Déformations et Inclinaisons du Sous-sol: Développements Instrumentaux et Applications dans la Région Sismique d’Arette,France

We present a modified version of a tilt and strain meter conceived to have great sensibility and good stability. These instruments were deployed in a cave at the seismic Pyrenean region of Arette (France). We set in evidence several types of phenomena, of which deformations brought about by water recharge filling up fissures on the massif are of importance. Owing to the redundance in the data, the study of the co-seismic deformations allows one to separate instrumental displacements and local readjustments from regional motions.     

A simplified approach for vulnerability assessment in moderate-to-low seismic hazard regions: application to Grenoble (France)

Due to the moderate seismic risks in France, the building vulnerability assessment methods developed for high seismic risk countries could not easily be used here because of their cost and the low-risk perception among the public and officials. A light vulnerability assessment method is proposed and tested in Grenoble (France), based on classes and scores provided in the GNDT method but simplified in terms of visual screening and number of structural parameters used. Compared to the RiskUE method, the damage obtained by our approach shows that 90% of buildings have residuals smaller than 0.2, i.e. one grade of the EMS98 damage scale. A large scale survey is devised and conducted among the inhabitants of Grenoble in order to collect the main structural parameters. By comparing the results from the survey to the historical urbanization of Grenoble and to expert surveys performed in two urban districts, the information useful for the light method of vulnerability assessment can be rapidly collected by non-experts reducing substantially the estimate cost. The average damage is then computed using the GNDT formula considering the probable intensities which could be observed in Grenoble (VII and VIII). The average damage reaches 0.4 in the oldest part of Grenoble mainly made of masonry buildings and 0.2 in reinforced concrete suburbs where reinforced concrete predominates. The results are a relative vulnerability assessment that provides useful initial information for the urban zones of Grenoble where the vulnerability is higher. This method can be used to classify the seismic vulnerability in wide seismic-prone regions to a fair degree of accuracy and at low cost.     

Inversion of interference hydraulic pumping tests in both homogeneous and fractal dual media

This work proposes a complete method for automatic inversion of data from hydraulic interference pumping tests based on both homogeneous and fractal dual-medium approaches. The aim is to seek a new alternative concept able to interpret field data, identify macroscopic hydraulic parameters and therefore enhance the understanding of flow in porous fractured reservoirs. Because of its much contrasted sensitivities to parameters, the dual-medium approach yields an ill-posed inverse problem that requires a specific optimization procedure including the calculation of analytical sensitivities and their possible re-scaling. Once these constraints are fulfilled, the inversion proves accurate, provides unambiguous and reliable results. In the fractal context inverting several drawdown curves from different locations at the same time reveals more accurate. Finally, hydraulic parameters drawn from inversion should be taken into account to improve in various situations the conditioning of up-scaled flow in fractured rocks.     

Adaptation of prestack migration to multi-offset ground-penetrating radar (GPR) data

In adapting the prestack migration technique used in seismic imaging to the inversion of ground‐penetrating radar (GPR) from time‐ to depth‐sections, we show that the theoretical integral formulation of the inversion can be applied to electromagnetic problems, albeit with three assumptions. The first two assumptions concern the electromagnetic characteristics of the medium, primarily that the medium must be perfectly resistive and non‐dispersive, and the third concerns the antennae radiation pattern, which is taken to be 2D. The application of this adaptation of the inversion method is confirmed by migrating actual GPR measurements acquired on the test site of the Laboratoire Central des Ponts et Chaussées. The results show good agreement with the geometry of the structures in the medium and confirm that the possible departure from the assumption of a purely resistive medium has no visible effect on the information concerning the geometry of scattering and reflecting structures. The field experiments also show that prestack migration processing is sufficiently robust with regard to the assumption of a non‐dispersive medium. The assumption of a 2D antennae radiation pattern, however, produces artefacts that could be significant for laterally heterogeneous media. Nevertheless, where the medium is not highly laterally heterogeneous, the migration gives a clear image of the scattering potential due to the geometry of structural contrasts in the medium; the scatterers are well focused from diffraction hyperbolae and well localized. Spatial geometry has limited dimensional accuracy and positions are located with a maximum error equal to the minimum wavelength of the signal bandpass. Objects smaller than one wavelength can nevertheless be detected and well focused if their dielectric contrasts are sufficiently high, as in the case of iron or water in gneiss gravels. Furthermore, the suitability of multi‐offset protocols to estimate the electromagnetic propagating velocity and to decrease the non‐coherent noise level of measurements is confirmed. Our velocity estimation is based on the semblance calculation of multi‐offset migrated images, and we confirmed the relevance of this quantification method using numerical data. The signal‐to‐noise ratio is improved by summing multi‐offset results after the addition of random noise on measurements. Thus the adaptation of prestack migration to multi‐offset radar measurements significantly improves the resolution of the scattering potential of the medium. Limitations associated with the methods used here suggest that 3D algorithms should be applied to strongly laterally heterogeneous media and further studies concerning the waveform inversion are necessary to obtain information about the electric nature of the medium.     

Fine sediment transport and accumulations at the mouth of the Seine estuary (France)

A comprehensive study of fine sediment transport in the macrotidal Seine estuary has been conducted, including observations of suspended particulate matter (SPM), surficial sediment, and bathymetric data, as well as use of a three dimensional mathematical model. Tide, river regime, wind, and wave forcings are accounted. The simulated turbidity maximum (TM) is described in terms of concentration and location according to tidal amplitude and the discharge of the Seine River. The TM is mainly generated by tidal pumping, but can be concentrated or stretched by the salinity front. The computed deposition patterns depend on the TM location and are seasonally dependent. The agreement with observations is reasonable, although resuspension by waves may be overestimated. Although wave resuspension is likely to increase the TM mass, it generally occurs simultaneously with westerly winds that induce a transverse circulation at the mouth of the estuary and then disperse the suspended material. The resulting effect is an output of material related to wind and wave events, more than to high river discharge. The mass of the computed TM remains stable over 6 months and independent of the river regime, depending mainly on the spring tide amplitude. Computed fluxes at different cross-sections of the lower estuary show the shift to the TM according to the river flow and point out the rapidity of the TM adjustment to any change of river discharge. The time for renewing the TM by riverine particles has been estimated to be one year.     

一个改进的湍流垂直扩散过程参数化方案

研究了数值天气预报模式中次阿格湍流垂直扩散过程的参数化问题。以Ｂｏｕｇｅａｕｌｔ和Ｌａｃａｒｒｅｒｅ（１９８９）的参数化方案为基础，改进了处理湍流混合长的方法，使湍流混合长和热力混合长分别依赖于基本气流的静力稳定度和风场切变。新方案的基本思路是把ＶｏｎＫａｒｍａｎ（１９３０）提出的动力（风场切变）湍流扰动假设与ＢＬ－８９方案提出的热力（静力稳定度）湍流扰动假设结合在一起，强调了大气的热力结构、动力结构和湍流动能对湍流混合过程的共同影响。新方案和ＢＬ－８９方案的二维对比数值试验结果表明，在大气处于静力较稳定而风场切变明显条件下的湍流扰动表现能力方面，新方案比原方案有明显的改进。     

himu-em: The French Polynesian connection

himu, em i andem ii are three of the main geochemical mantle components that give rise to oceanic island basalts [1]. They represent the end members that produce the extreme isotopic compositions measured on intraplate volcanics. In French Polynesia, all three mantle components are represented in volcanic rocks. The characteristichimu signature is found in Tubuai, Mangaia and Rurutu,em i is present in the source of Rarotonga and Pitcairn volcanics andem ii dominates the composition of most Society Islands. Intermediate values between the three end members are found on most islands.We suggest that the three components are not independent but are physically related in the mantle. Thehimu component is thought to be recycled oceanic crust that lost part of its Pb through hydrothermal processes prior to and during subduction.em i andem ii are believed to acquire their isotopic and trace element characteristics through entrainment of sediments that were subducted together with the oceanic crust.The trace element pattern and the isotopic composition ofhimu lavas can be quantitatively modelled using a mixture of 25% old recycledmorb crust and 75% mantle peridotite. The extreme Pb composition is modelled assuming that Pb was lost from oceanic crust when hydrothermal alteration at the ridge leached Pb from the basalt to redeposit it as sulphides on top of and throughout the crust, followed by preferential dissolution of sulphides during dehydration in the subduction zone. These processes led to a drastic increase of theU/Pb ratio of the subducted material which evolved over 2 Ga to very radiogenic Pb isotopic compositions. Pb isotopic compositions similar to those ofem i andem ii are modelled assuming that sediments with average crustal Pb isotopic compositions were subducted and recycled into the mantle together with the underlyingmorb oceanic crust. Pelagic sediments (μ 5 andκ 6) account for the Pb isotopic composition ofem i whereas terrigenous sediments (μ 10 andκ 4.5) evolve towards theem ii end member. A few percent of sediment in the recycled crust-sediment mixture will destroy the characteristic Pb isotopic signature of thehimu component. This, together with the low probability of isolating oceanic crust in the mantle for 2 Ga, explains why the extremehimu composition, as seen on Tubuai and St Helena, is sampled so rarely by oceanic volcanism.