New method for in situ characterization of loose material for landslide mapping purpose

The assessment of grain size distribution and plasticity of loose geological material, during in situ geological investigations, is not obvious. Visual appreciation allows an approximative quantification of the coarse granulometric fractions, but not of the fine ones. Field soils determination methods suggested until now, are visual and tactile tests leading to a very rough estimate, which is only qualitative and not very reproducible. The new proposed field test (GEOLEP method) allows a quick quantification of the fine fraction of loose material. It allows the determination of the sand fraction (fine and medium grained sands) as well as the methylene blue value of the samples. The necessary equipment to perform this test is light and compact and the time needed to analyze one sample is approximately 15 min. Thus it is also possible to carry out numerous measurements in one day. The calibrations were carried out on a selection of 13 natural samples, chosen for their representativeness of the typical alpine quaternary deposits. The results obtained with GEOLEP method are relevant compared with standardized laboratory tests; the obtained correlation indexes are of 73% for the comparison with laboratory stain test results and of 89% with a laboratory method using a similar procedure than the field test. The correlation we performed with Atterberg's limits tests shows that a rough approximation of plasticity index can also be obtained (R² = 75%). This method thus brings a new tool which should allow taking into account the lithological factor (by some quantitative and representative variables) in a reliable way for the evaluation of landslide hazards.     

Control of wind strength and frequency in the Aral Sea basin during the late Holocene

Changing content of detrital input in laminated sediments traced by XRF scanning and microfacies analyses reflect prominent variations in sedimentation processes in the Aral Sea. A high-resolution record of titanium from a core retrieved in the northwestern Large Aral Sea allows a continuous reconstruction of wind strength and frequency in western Central Asia for the past 1500 yr. During AD 450–700, AD 1210–1265, AD 1350–1750 and AD 1800–1975, detrital inputs (bearing titanium) are high, documenting an enhanced early spring atmospheric circulation associated with an increase in intensity of the Siberian High pressure system over Central Asia. In contrast, lower titanium content during AD 1750–1800 and AD 1980–1985 reflects a diminished influence of the Siberian High during early spring with a reduced atmospheric circulation. A moderate circulation characterizes the time period AD 700–1150. Unprecedented weakened atmospheric circulation over western Central Asia are inferred during ca. AD 1180–1210 and AD 1265–1310 with a considerable decrease in dust storm frequency, sedimentation rates, lamination thickness and detrital inputs (screened at 40-μm resolution). Our results are concurrent with changes in the intensity of the Siberian High during the past 1400 yr as reported in the GISP2 Ice Core from Greenland.     

Metamorphism at the northwest contact of the Stanhope Pluton,Quebec Appalachians: Mineral equilibria in interbedded pelite and calc-schist

The interbedding of pelite and calc-schist in part of the contact aureole of a Devonian (biotite K-Ar age 346±4 Ma) granite pluton that straddles the Quebec-Vermont border offers an opportunity to compare metamorphic conditions prevailing in both rock types, and to test for internal consistency among several different geothermometers and geobarometers.Microprobe analyses and recent thermodynamic data are used with simple activity-composition models to estimate P-T-X _fluid conditions near the sillimanite zone. Calculations yield the following results: P=2 to 3 kb, and T =400° to 600° C in the inner one kilometre of the aureole; was around 0.8. Estimates are based on the calc-silicate isobaric invariant assemblages tremolite-K-feldspar-plagioclase-clinozoisite-phlogopite-calcite-quartz and diopside-tremolite-plagiolase-clinozoisite-calcite-quartz, and the paragonite-andalusite-sillimanite-albite-quartz equilibrium. The solid-solid reaction phlogopite+2 diopside + 4 quartz=tremolite+K-feldspar in the calc-schist (combined with the andalusite-sillimanite equilibrium), and phase relations in the granite yield apparently inconsistent results.The implied 6 to 10 km of cover at the time of intrusion may have been provided by subsequently eroded thrust sheets.     

Elastic modulus and internal friction in enstatite,forsterite and peridotite at seismic frequencies and high temperatures

Spectra of internal friction between 2 and 8 Hz were studied in a single crystal of enstatite, in a polycrystal of synthetic forsterite and in several samples of natural peridotite. Measurements of Q^?1 and μ were performed in vacuum (10^?6 torr), from room temperature up to 1100°C. For these experimental conditions no peak was observed in the polycrystalline undeformed forsterite, but the background attenuation irregularly increased from 5 · 10^?3 to 10^?2.A peak Q^?1 = 7 · 10^?2 appears in a deformed peridotite at 930°C. It is reduced of 60% after 5 h of annealing at 1100°C. But the background attenuation persists. In the single crystal of enstatite, a peak is observed at 760°C (Q^?1 = 6 · 10^?2). A mechanism involving dislocations is suggested as a possible explanation for the peak obtained with the peridotite samples. If this hypothesis is right, the observed effect would be diffusion controlled so that one can expect pressure to translate it towards higher temperature. This mechanism could therefore appear in the upper mantle. Background attenuation could be the result of intergranular thermal losses.     

Multiscale approach to geo‐composite cellular structures subjected to rock impacts

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.     

Geodetic constraints on active tectonics of the Western Mediterranean: Implications for the kinematics and dynamics of the Nubia-Eurasia plate boundary zone

We present GPS observations in Morocco and adjacent areas of Spain from 15 continuous (CGPS) and 31 survey-mode (SGPS) sites extending from the stable part of the Nubian plate to central Spain. We determine a robust velocity field for the W Mediterranean that we use to constrain models for the Iberia-Nubia plate boundary. South of the High Atlas Mountain system, GPS motions are consistent with Nubia plate motions from prior geodetic studies. We constrain shortening in the Atlas system to <1.5 mm/yr, 95% confidence level. North of the Atlas Mountains, the GPS velocities indicate Nubia motion with respect to Eurasia, but also a component of motion normal to the direction of Nubia-Eurasia motion, consisting of southward translation of the Rif Mountains in N Morocco at rates exceeding 5 mm/yr. This southward motion appears to be directly related to Miocene opening of the Alboran Sea. The Betic Mountain system north of the Alboran Sea is characterized by WNW motion with respect to Eurasia at ～1–2 mm/yr, paralleling Nubia-Eurasia relative motion. In addition, sites located in the Betics north of the southerly moving Rif Mountains also indicate a component of southerly motion with respect to Eurasia. We interpret this as indicating that deformation associated with Nubia-Eurasia plate motion extends into the southern Betics, but also that the Betic system may be affected by the same processes that are causing southward motion of the Rif Mountains south of the Alboran Sea. Kinematic modeling indicates that plate boundary geometries that include a boundary through the Straits of Gibraltar are most compatible with the component of motion in the direction of relative plate motion, but that two additional blocks (Alboran-Rif block, Betic Mountain block), independent of both Nubia and Eurasia are needed to account for the motions of the Rif and Betic Mountains normal to the direction of relative plate motion. We speculate that the southward motions of the Alboran-Rif and Betic blocks may be related to mantle flow, possibly induced by southward rollback of the subducted Nubian plate beneath the Alboran Sea and Rif Mountains.     

Calibrating a glaciological model of the Greenland ice sheet from the Last Glacial Maximum to present-day using field observations of relative sea level and ice extent

We constrain a three-dimensional thermomechanical model of Greenland ice sheet (GrIS) evolution from the Last Glacial Maximum (LGM, 21 ka BP) to the present-day using, primarily, observations of relative sea level (RSL) as well as field data on past ice extent. Our new model (Huy2) fits a majority of the observations and is characterised by a number of key features: (i) the ice sheet had an excess volume (relative to present) of 4.1 m ice-equivalent sea level at the LGM, which increased to reach a maximum value of 4.6 m at 16.5 ka BP; (ii) retreat from the continental shelf was not continuous around the entire margin, as there was a Younger Dryas readvance in some areas. The final episode of marine retreat was rapid and relatively late (c. 12 ka BP), leaving the ice sheet land based by 10 ka BP; (iii) in response to the Holocene Thermal Maximum (HTM) the ice margin retreated behind its present-day position by up to 80 km in the southwest, 20 km in the south and 80 km in a small area of the northeast. As a result of this retreat the modelled ice sheet reaches a minimum extent between 5 and 4 ka BP, which corresponds to a deficit volume (relative to present) of 0.17 m ice-equivalent sea level. Our results suggest that remaining discrepancies between the model and the observations are likely associated with non-Greenland ice load, differences between modelled and observed present-day ice elevation around the margin, lateral variations in Earth structure and/or the pattern of ice margin retreat.     

Alteration geochemistry of the Nopal I uranium deposit (Sierra Peña Blanca,Mexico), a natural analogue for a radioactive waste repository in volcanic tuffs

Natural analogues provide an approach to characterize and test the long‐term modelling of a repository performance. This article presents geochemical information about the alteration conditions of the Nopal I uranium deposit, Mexico, an analogue for the proposed Yucca Mountain radioactive waste repository. Mineralization and hydrothermal alteration of volcanic tuffs are contemporaneous, according to petrographic observations. Trace element geochemistry (U, Th, REE) provides evidence for local mobilization of uranium under oxidizing conditions and further precipitation under reducing conditions. O‐ and H‐isotope geochemistry of kaolinite, smectite, opal and calcite suggests that argillic alteration proceeded at shallow depth with meteoric water at 25–75 °C, a low‐temperature context, unusual for volcanic‐hosted uranium deposits. This temperature range is compatible with some post‐closure evolution models of the proposed Yucca Mountain repository.     

A Rhaetian 40Ar/39Ar age for the Rochechouart impact structure (France) and implications for the latest Triassic sedimentary record

Abstract– ⁴⁰Ar/³⁹Ar dating of potassium feldspar (primary spherulitic‐blocky and secondary idiomorphic K‐feldspar) separated from impact‐metamorphosed gneiss found near Videix in the western central part of the Rochechouart impact structure (NW Massif Central, France) yielded a Rhaetian combined age of 201 ± 2 Ma (2σ), indistinguishable within uncertainty from the age of the Triassic/Jurassic boundary. Ballen quartz intergrown with the primary K‐feldspar indicates post‐shock temperatures exceeding approximately 1000 °C that affected the precursor gneiss. Geochemically, both feldspar types represent essentially pure potassium end‐members. Apart from the approximately 15 km diameter impact deposit area, the youngest crystallization age known for basement rocks in this part of the Massif Central is approximately 300 Ma. No endogenic magmatic‐thermal events are known to have occurred later in this region. The K‐feldspar recrystallized from local feldspar melts and superimposed post‐shock hydrothermal crystallization, probably within some thousands of years after the impact. It is, therefore, suggested that the ⁴⁰Ar/³⁹Ar age for the Videix gneiss (as a potassic “impact metasomatite”) dates the Rochechouart impact, in consistence with evidence for K‐metasomatism in the Rochechouart impactites. The new age value is distinctly younger than the previously obtained Karnian–Norian age for Rochechouart and, thus, contradicts the Late Triassic multiple impact theory postulated some years ago. In agreement with the paleogeographic conditions in the western Tethys domain around the Triassic/Jurassic boundary, the near‐coastal to shallow marine Rochechouart impact is compatible with the formation of seismites and tsunami deposits in the latest Triassic of the British Isles and possible related deposits in other parts of Europe.