Sedimentary archives of the French Atlantic coast (inner Bay of Vilaine,south Brittany): Depositional history and late Holocene climatic and environmental signals

The late Holocene is of particular interest to our understanding of the evolution of coastal sedimentary systems because this period encompasses warmer and cooler periods, and rising sea level in northern Europe. Based on an approach combining AMS ¹⁴C, sedimentological and rock magnetic analyses on sediment cores complemented with seismic data collected in the macrotidal Bay of Vilaine (south Brittany), we document the depositional history of the inner bay coeval to the mid- to late-Holocene transgression in south Brittany. Correlation between sedimentary archives revealed the main sedimentary infilling phases during the last 6000 years. Four units (U1–U4) are recognized in the coastal sediment wedge of the system, corresponding to the stepwise marine invasion of the bay. We show that (1) marine inundation, due to the steep morphology of the bedrock, is diachronous between distal and proximal records. A time lag of ～1000 years is inferred over a distance of less than 5 km; (2) in the outer areas, the sedimentation has been condensed since 3000 years; (3) proximal estuarine archives offer the best record of sedimentary processes covering the last 2000 years, including the Medieval Warm Period (MWP).Correlations in proximal records in the Bay of Vilaine assess the connection between coastal sedimentary dynamics, climatic conditions and anthropogenic activities during the MWP. We match the preservation of clay deposits to increased river-borne suspended matter transported to the estuary probably as a result of accelerated land-use development (higher soil erosion) in the catchment area between ca. 880 and 1050 AD. Because the preservation of estuarine sedimentary successions is favoured when coastal wave sediment reworking is minimal, it is proposed that the prevailing climatic regime in south Brittany during the MWP likely resembled to that of the preferred negative phase of the North Atlantic Oscillation (NAO). Our data are fairly consistent with other late Holocene records from northern Europe including the Atlantic seaboard. However, they outline the difficulty in interpreting climatic and anthropogenic signatures in coastal sedimentary records where high-resolution chronologies required to unravel their respective influences are still missing.     

Methodology of seasonal morphological modelisation for nourishment strategies on a Mediterranean beach

A modified 2DH morphodynamical model was employed to simulate the evolution of large-scale features with major implications for beach nourishment. The study was focused on modelling the evolution of material artificially placed in different parts of the profile, extracting or adding material to the natural bars, and quantifying how the profile responds to different wave climates and nourishment placements. The simulated results were compared with field data from a Mediterranean beach.     

Inversion of interference hydraulic pumping tests in both homogeneous and fractal dual media

This work proposes a complete method for automatic inversion of data from hydraulic interference pumping tests based on both homogeneous and fractal dual-medium approaches. The aim is to seek a new alternative concept able to interpret field data, identify macroscopic hydraulic parameters and therefore enhance the understanding of flow in porous fractured reservoirs. Because of its much contrasted sensitivities to parameters, the dual-medium approach yields an ill-posed inverse problem that requires a specific optimization procedure including the calculation of analytical sensitivities and their possible re-scaling. Once these constraints are fulfilled, the inversion proves accurate, provides unambiguous and reliable results. In the fractal context inverting several drawdown curves from different locations at the same time reveals more accurate. Finally, hydraulic parameters drawn from inversion should be taken into account to improve in various situations the conditioning of up-scaled flow in fractured rocks.     

Simulating rainfall time-series: how to account for statistical variability at multiple scales?

Daily rainfall is a complex signal exhibiting alternation of dry and wet states, seasonal fluctuations and an irregular behavior at multiple scales that cannot be preserved by stationary stochastic simulation models. In this paper, we try to investigate some of the strategies devoted to preserve these features by comparing two recent algorithms for stochastic rainfall simulation: the first one is the modified Markov model, belonging to the family of Markov-chain based techniques, which introduces non-stationarity in the chain parameters to preserve the long-term behavior of rainfall. The second technique is direct sampling, based on multiple-point statistics, which aims at simulating a complex statistical structure by reproducing the same data patterns found in a training data set. The two techniques are compared by first simulating a synthetic daily rainfall time-series showing a highly irregular alternation of two regimes and then a real rainfall data set. This comparison allows analyzing the efficiency of different elements characterizing the two techniques, such as the application of a variable time dependence, the adaptive kernel smoothing or the use of low-frequency rainfall covariates. The results suggest, under different data availability scenarios, which of these elements are more appropriate to represent the rainfall amount probability distribution at different scales, the annual seasonality, the dry-wet temporal pattern, and the persistence of the rainfall events.     

Sediment flux-driven channel geometry adjustment of bedrock and mixed gravel–bedrock rivers

Sediment supply (Q_s) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min⁻¹) under different Q_s (between 0 and 20 g l⁻¹) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Q_s are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Q_s are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Q_s is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Q_s. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Dose-dependent response of a benthic system to biodeposition from suspended blue mussel (Mytilus edulis) culture

This study reports the results of a field experiment using benthic mesocosms that examined dose-dependent effects of mussel biodeposition on the benthic environment. Mesocosms were placed in the natural sea bottom and subjected to one of eight levels of biodeposition (from 0 to 1400 mussels m^?2). Most analyses indicated non-linear (i.e., threshold) effects. Sediment characteristics changed significantly between 200 and 400 mussels m^?2 as did multivariate community structure. Community structure effects were characterised by changes in abundances of species that are very sensitive or tolerant to organic loading. The multivariate AZTI Marine Biotic Index (M-AMBI) indicated that the benthic status changed from High to Good in all mesocosms receiving biodeposits. Sediments acted as a sink for oxygen (O₂), but results suggest O₂ sediment demand was not sensitive enough to evaluate organic loading impacts. Results from this and improved experiments can be used to determine the environmental carrying capacity of sites for bivalve culture.     

Identification of Groundwater Parameters Using an Adaptative Multiscale Method

The identification of groundwater parameters in heterogeneous systems is a major challenge in groundwater modeling. Flexible parameterization methods are needed to assess the complexity of the spatial distributions of these parameters in real aquifers. In this article, we introduce an adaptative parameterization to identify the distribution of hydraulic conductivity within the large‐scale (4400 km²) Upper Rhine aquifer. The method is based on adaptative multiscale triangulation (AMT) coupled with an inverse problem procedure that identifies the parameters' distributions by reducing the error between measured and simulated heads. The AMT method has the advantage of combining both zonation and interpolation approaches. The AMT method uses area‐based interpolation rather than an interpolation based on stochastic features. The method is applied to a standard 2D groundwater model that takes into account the interactions between the aquifer and surface water bodies, groundwater recharge, and pumping wells. The simulation period covers 204 months, from January 1986 to December 2002. Recordings at 109 piezometers are used for model calibration. The simulated heads are globally quite accurate and reproduce the main dynamics of the system. The local hydraulic conductivities resulting from the AMT method agree qualitatively with existing local experimental observations across the Rhine aquifer.     

Etude des Déformations et Inclinaisons du Sous-sol: Développements Instrumentaux et Applications dans la Région Sismique d’Arette,France

We present a modified version of a tilt and strain meter conceived to have great sensibility and good stability. These instruments were deployed in a cave at the seismic Pyrenean region of Arette (France). We set in evidence several types of phenomena, of which deformations brought about by water recharge filling up fissures on the massif are of importance. Owing to the redundance in the data, the study of the co-seismic deformations allows one to separate instrumental displacements and local readjustments from regional motions.     

A preliminary investigation of strong-motion data from the French Antilles

Strong-motion networks have been operating in the Caribbean region since the 1970s, however, until the mid-1990s only a few analogue stations were operational and the quantity of data recorded was very low. Since the mid-1990s, digital accelerometric networks have been established on islands within the region. At present there are thought to be about 160 stations operating in this region with a handful on Cuba, 65 on the French Antilles (mainly Guadeloupe and Martinique), eight on Jamaica, 78 on Puerto Rico (plus others on adjacent islands) and four on Trinidad.After briefly summarising the available data from the Caribbean islands, this article is mainly concerned with analysing the data that has been recorded by the networks operating on the French Antilles in terms of their distribution with respect to magnitude, source-to-site distance, focal depth and event type; site effects at certain stations; and also with respect to their predictability by ground motion estimation equations developed using data from different regions of the world. More than 300 good quality triaxial acceleration time-histories have been recorded on Guadeloupe and Martinique at a large number of stations from earthquakes with magnitudes larger than 4.8, however, most of the records are from considerable source-to-site distances. From the data available it is found that many of the commonly-used ground motion estimation equations for shallow crustal earthquakes poorly estimate the observed ground motions on the two islands; ground motions on Guadeloupe and Martinique have smaller amplitudes and are more variable than expected. This difference could be due to regional dependence of ground motions because of, for example, differing tectonics or crustal structures or because the ground motions so far recorded are, in general, from smaller earthquakes and greater distances than the range of applicability of the investigated equations.