Gold partitioning in melt-vapor-brine systems

We used laser-ablation inductively coupled plasma mass spectrometry to measure the solubility of gold in synthetic sulfur-free vapor and brine fluid inclusions in a vapor + brine + haplogranite + magnetite + gold metal assemblage. Experiments were conducted at 800°C, oxygen fugacity buffered at Ni-NiO (NNO), and pressures ranging from 110 to 145 MPa. The wt% NaCl eq. of vapor increases from 2.3 to 19 and that of brine decreases from 57 to 35 with increasing pressure. The composition of the vapors and brines are dominated by NaCl + KCl + FeCl₂ + H₂O. Gold concentrations in vapor and brine decrease from 36 to 5 and 50 to 28 μg/g, respectively, and the calculated vapor:brine partition coefficients for gold decrease from 0.72 to 0.17 as pressure decreases from 145 to 110 MPa. These data are consistent with the thermodynamic boundary condition that the concentration of gold in the vapor and brine must approach a common value as the critical pressure is approached along the 800°C isotherm in the NaCl-KCl-FeCl₂-HCl-H₂O system.We use the equilibrium constant for gold dissolution as AuOH⁰, extrapolated from lower temperature and overlapping pressure range, to calculate expected concentrations of AuOH⁰ in our experimental vapors. These calculations suggest that a significant quantity of gold in our experimental vapors is present as a non-hydroxide species. Possible chloridogold(I) species are hypothesized based on the positively correlated gold and chloride concentrations in our experimental vapors. The absolute concentration of gold in our synthetic vapor, brine, and melt and calculated mass partition coefficients for gold between these physicochemically distinct magmatic phases suggests that gold solubility in aqueous fluids is a function of aqueous phase salinity, specifically total chloride concentration, at magmatic conditions. However, though we highlight here the effect of salinity, the combination of our data with data sets from lower temperatures evinces a significant decrease in gold solubility as temperature drops from 800°C to 600°C. This decrease in solubility has implications for gold deposition from ascending magmatic fluids.     

Transparent Exopolymer Particles (TEP) in a River-Dominated Estuary: Spatial–Temporal Distributions and an Assessment of Controls upon TEP Formation

Transparent exopolymer particle (TEP) distributions were examined in North Carolina’s Neuse River Estuary (NRE) over a 1-year period, and experiments were conducted to examine controls upon TEP formation. TEP-carbon averaged 16% of the total organic carbon pool in the NRE. From May to early August 2007, TEP ranged from 805 to 1,801 μg xanthan gum (XG) L⁻¹. A large phytoplankton bloom peaked in early August and then subsequently declined. Within 2 weeks of the bloom’s peak, TEP concentrations increased to >3,500 μg XG L⁻¹ and remained elevated through mid-December. Decreasing water temperatures and enhanced retention due to drought conditions in Fall 2007 likely aided in the persistence of TEP concentrations during this timeframe. Thereafter, TEP decreased coincident with increased river flow and flushing of the estuary that began in January 2008, and TEP remained low (ranging from 991 to 1,712 μg XG L⁻¹) until the end of April 2008. TEP was positively correlated with salinity, suggesting that cation availability (which co-varies with salinity and stabilizes the structural integrity of TEP) may play a role in estuarine TEP formation. In two cation addition experiments using water from the mesohaline region, TEP concentrations tended to be higher in treatments with vs. without cations added. Statistically significant relationships were also found between in situ TEP concentrations and pH, mixing, and temperature, suggesting that a complex suite of environmental parameters affect TEP formation and its distribution in estuaries.     

Effect of rising atmospheric CO2 on sediment and water 15N interactions in experimental riparian wetland

The experiment was conducted to ascertain net production and consumption rates of ¹⁵NH₄ ⁺ and ¹⁵NO₃ ^? for water and sediment in a wetland. This was done using ¹⁵N isotope pool dilution methodology under ambient and elevated atmospheric CO₂ concentrations in experimental riparian wetlands to obtain the gross N transformation rates. The ¹⁵N budget for sediment was also estimated. The results suggested that the differences in high proportion of ¹⁵N concentration in the overlying water body under elevated CO₂ could be attributed to the low production and high consumption rates of ¹⁵NH₄ ⁺ in sediment. The elevated CO₂ effect on production and consumption of NH₄ ⁺ decreased by 144 % (P = 0.014) and increased by 153 % (P = 0.009), respectively. Thereby, ¹⁵NH₄ ⁺ production rates are negatively related with ¹⁵NO₃ ^? consumption rates and this accounted for the decreases in net ¹⁵NO₃ ^? consumption under CO₂ enrichment in the wetland sediment by 11 % (P = 0.528). Therefore, ¹⁵NO₃ ^? production and consumption rates may strongly depend on NH₄ ⁺ production. Inorganic ¹⁵N and total ¹⁵N exported from sediment to overlying water body by the effect of CO₂ were 41 % (P = 0.071) and 18 % (P = 0.000), respectively. Therefore, low net ¹⁵NH₄ ⁺ production and high ¹⁵NH₄ ⁺ consumption rates under elevated CO₂ may partly explain the significant reduction of N from the sediment.     

Folding of passive layers and forms of minor structures near terminations of blind thrust faults—application to the central Appalachian blind thrust

The existence of detachment surfaces or décollement zones beneath folded rocks of the Valley and Ridge and Plateau provinces of the Appalachians has been recognized as an important condition of folding. Large folds at the border between the two provinces resulted primarily from repetition of strata by thrusting of blocks over ramp faults that connect detachement surfaces at different horizons. Some investigators have suggested that folds in the Plateau province of Pennsylvania were produced by splay faults arising from detachment surfaces, but field observations and theoretical analyses by Sherwin and by Wiltschko & Chapple suggest that the folds are a result of buckling of multilayered rocks above a décollement. An exception may be the Burning Springs anticline in West Virginia, which appears to have formed at the termination of a detachment surface.Investigation of the translation of an homogenous, viscous material above a flat detachment surface that terminates laterally indicates that the termination produces a broad, low-amplitude anticline in passive layering as a result of thickening induced by a gradient of shear stresses in the vertical direction. This thickening above the termination of a detachment is a mechanism of folding. If the viscous fluid contained mechanical layering, the fold would become amplified by buckling. Computations of stresses in the material indicate that minor faults should be generated first near the termination of the flat detachment surface. The Burning Springs anticline probably was initiated by termination of a detachment surface and subsequently amplified by buckling.     

Aussiedler migration and its impact on Braşov's ethnic German population and built environment

The expression of different ethnic identities in the landscape is a product of the creation, destruction and preservation of the built environment. This may illustrate the changing processes over the evolution of a landscape. In the case of Braşov, Romania, it is possible to see in the urban landscape a reflection of the changing nature of the relationship between the ethnic German and Romanian populations, and the German and Romanian governments. This paper will demonstrate the persistence of ethnic German culture in the built environment and social organisation of Braşov in spite of the exodus of the ethnic German population. This revised version was published online in July 2006 with corrections to the Cover Date.     

Temporal association of arc–continent collision,progressive magma contamination in arc volcanism and formation of gold-rich massive sulphide deposits on Wetar Island (Banda arc)

Whole-rock ⁸⁷Sr/⁸⁶Sr and δ¹⁸O analyses of volcanic rocks and ³He/⁴He analyses of sulphides and sulphates from mineralized rocks on Wetar, Indonesia indicate a variable contribution of assimilated crustal material or sediment sourced from the subducted Australian craton to the south. These new data support the idea of progressive source contamination with precisely dated events showing that Wetar Island hosts the most extreme examples of crustal assimilation in the region. The increased continental contamination occurs during the Pliocene (Zanclian to Piacenzian) during distinct magmatic events between 5 and 4 Ma, and at 2.4 Ma when ⁸⁷Sr/⁸⁶Sr ratios in unaltered lavas, with whole-rock δ¹⁸O values between 5.7 and 9.6‰, increase from 0.707484 to extreme radiogenic values of 0.711656.The earlier of these magmatic events is important in the generation of the hydrothermal systems responsible for the mineralization recorded on Wetar. Samples from this yield radiogenic ³He/⁴He ratios between 0.5 and 1.4 R/R_A, similar to the data from volcanic rocks on nearby Romang. The later magmatic event coincides with the arrival of the Australian Continental Margin at the subduction zone along the Banda arc. Progressive incorporation of continental-sourced components into the source region below the Wetar Island edifice coincides with the formation of gold-rich volcanogenic massive sulphide deposits hosted within the contaminated volcanic pile.     

Hydrogen emissions from Erebus volcano, Antarctica

The continuous measurement of molecular hydrogen (H₂) emissions from passively degassing volcanoes has recently been made possible using a new generation of low-cost electrochemical sensors. We have used such sensors to measure H₂, along with SO₂, H₂O and CO₂, in the gas and aerosol plume emitted from the phonolite lava lake at Erebus volcano, Antarctica. The measurements were made at the crater rim between December 2010 and January 2011. Combined with measurements of the long-term SO₂ emission rate for Erebus, they indicate a characteristic H₂ flux of 0.03?kg s^–1 (2.8?Mg? day^–1). The observed H₂ content in the plume is consistent with previous estimates of redox conditions in the lava lake inferred from mineral compositions and the observed CO₂/CO ratio in the gas plume (～0.9 log units below the quartz–fayalite–magnetite buffer). These measurements suggest that H₂ does not combust at the surface of the lake, and that H₂ is kinetically inert in the gas/aerosol plume, retaining the signature of the high-temperature chemical equilibrium reached in the lava lake. We also observe a cyclical variation in the H₂/SO₂ ratio with a period of ～10?min. These cycles correspond to oscillatory patterns of surface motion of the lava lake that have been interpreted as signs of a pulsatory magma supply at the top of the magmatic conduit.